20 Most Recent Canon MP610 Photo All-In-One Printer - Page 2 Questions & Answers

three defects may cause.
1- change usb cable to different port. (test the port of pc with using pen drive)
2-do replace with another USB cable.
3- printer may defect.

remedies- Try to un install and reinstall the printer driver and its software.

Besides these trained personnel required.


Canon MP610... | Answered on Feb 15, 2015

Get the latest driver from Canon's web site. Then uninstall the printer. Remove the driver from your computer. Use regedit to remove any traces of your printer from your registry. Install the new driver. That should do it.

Canon MP610... | Answered on Jan 11, 2015

Sounds like you have to buy new printhead... take a look on amazon: Amazon com canon mp610 printhead. I hope this was helpful. Cheers

Canon MP610... | Answered on Dec 15, 2014

apply print head clean and recalibrate ( alligmint)

Canon MP610... | Answered on Nov 13, 2014

I should have added that the extra plastic insert thing that comes with the CD holder is used when you want to print on the smaller 8cm disks.

Canon MP610... | Answered on Oct 22, 2014

Canon printers do not like non Canon inks. Maybe other printers have similar issues but it seems that Canon is particularly finnicky.

Canon MP610... | Answered on Oct 03, 2014

According to the service manual an error has occured writing to the eeprom on the logic circuit board. I would look at the logic board as a culprit . You may need to check the voltage is correct at the power point and matches the printer required supply voltage. What worries me is what caused the logic board to fail and make a burning smell. Could be a faulty voltage regulator supplying the logic board or a fault in a power board..

Canon MP610... | Answered on Aug 13, 2014

When the ink cartridge is parked there is a pad that absorbs the ink when the head cleaning routine is run. Clean this out and the message will go away.

Canon MP610... | Answered on Jun 24, 2014

Hi I have U051, and U052 coming up, I did what it said to do press ok if that doesn't work turn it off, now it is continuously going to these problems. What do I do.

Canon MP610... | Answered on Apr 22, 2014

You can scan when out of ink. You have to press and hold the reset button (red triangle inside a circle) for five seconds which tells the printer to ignore ink problems and continue.

Canon MP610... | Answered on Feb 06, 2014

Not finding what you are looking for?
Canon MP610 Photo All-In-One Printer Logo

471 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2301 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

when try scan computer tells me scanner

  • Office Equipment & Supplies