Mitac Mio P550 Pocket PC - Answered Questions & Fixed issues


I removed the rubber infill that covered a hidden screw. Released screw and then removed back plate. Removing the battery then required care as it is stuck with two sided tape to the Mio internals. Here I used a knive to prise/cut free.

Mitac Mio P550... | Answered on Jul 04, 2011 | 2,192 views


You can get the Master Reset Code from the service provider and reset it.

Mitac Mio P550... | Answered on Jul 29, 2011 | 433 views


try using it without a manual this way you can not get something wrong unless it is very doubtful. and you will tend to get use to it quicker

Mitac Mio P550... | Answered on Jul 03, 2010 | 61 views


up arrow + power_on until MIO logo

Mitac Mio P550... | Answered on Jun 03, 2010 | 1,422 views


http://forum.xda-developers.com/archive/index.php/t-277374.html

Mitac Mio P550... | Answered on Mar 21, 2010 | 183 views


try to restore it to the last working state, remove all cables, slide the switch to off position, wait 1 minute and slide it back on.
once it opens, make a clean boot to erase the errors encountered by your pda and restore it back to its factory setting.

good luck...

Mitac Mio P550... | Answered on Feb 24, 2010 | 204 views


how can i subscribe a GPRS settings for my china phone?coz i dont know.. its too hard..

Mitac Mio P550... | Answered on Jan 31, 2010 | 105 views


I have just replaced my battery in my Mio p560. On the back of the Mio at the top - remove the two small rubber bungs, you will see the screws underneath. On the back at the bottom you must remove the alluminium strip to get at the remaining two screws. This is the only tricky bit! The strip has the hole for the pointer on the right, with a small screwdriver prise up the LEFT side of the strip, it is stuck down but will come if you are gentle! Then you can detatch the strip at the right side. The two bottom screws will be under this strip. remove the four screws now. The FRONT of the Mio can then be separated from the back, it just clips along the sides. The battery can then be got at and exchanged. When you re-assemble make sure the on/off switch locates properly. Thats it! Regards David Harford

Mitac Mio P550... | Answered on Jan 21, 2010 | 3,939 views


if you have xp you will need to download microsoft active sync from www.microsoft.com and if you have vista you will need microsoft sync centre, these will be the latest versions and should work fine good luck

Mitac Mio P550... | Answered on Aug 09, 2009 | 2,358 views


Your battery is dead...replace it or see if it's still connected to it's connector( by removing the battery cover that have one screw hidden )

Mitac Mio P550... | Answered on Apr 10, 2009 | 174 views


It sounds like the device is not reading the ROM card at all. This most likely is not a home type fix. Check your warranty and see if there is a solution there.

Mitac Mio P550... | Answered on May 16, 2009 | 427 views


what is it, posted to computer repair help is too hard to tell what it does first? animal vegetable mineral?>(classic joke)
the only clue is start, (cards starts, boats and plains or anything with and engine) that?
the dictionary shows this. omg. list
Acronym Definition MITAC Mining Industry Training and Adjustment Council (Canada) MITAC Major Industries Training Advisory Council (Darwin, Northern Territory, Australia) MITAC Map Interpretation and Terrain Analysis Course MITAC Microcomputer Tactical (aid) MITAC Marine Industries Technical Assistance Service Center MITAC Massachusetts Institute of Technology Activities Committee 50 hits on google down the endless list of this name, I find
Mitac PD12TI CC Mini-ITX Motherboard w/ Intel Atom D2500 CPU, Dual LAN, D2500CCE (just wild guess but betting clues and unstated by YOU)
ok that is a computer. sure it.
a micro iTX PC. with ATOM POS CPU.

found their home page next
https://mitxpc.com/products/pd12ti-cc-d2550


SO WON"T start means? My guess will not turn ON.
what: VGA port dead powered on>?

there support page SUX, no manuals at all.
runs only windows 7 32bit, and that is now obsolete,
I found manual on line, on mirrored sites
it uses 24pin 2x12 PSU power supply. power.
to turn it on , jumper 2 pins on the header "P"
2x5 pins 6 to 8 jump turns it on. X = KEY
2468X
13579
https://www.cartft.com/support_db/support_files/Mitac_PD12TI_Manual.pdf

Mitac Computers... | Answered on Jun 28, 2019 | 25 views


Probably not too much help right now, but you can get a small device online for just that purpose. Try shopping for "computer power supply tester" Less than $5 including shipping.

Mitac Computers... | Answered on Feb 10, 2018 | 96 views


http://www.biosflash.com/e/Drivers-BIOS-Updates-MITAC.htm

Mitac Computers... | Answered on Jul 22, 2015 | 125 views


out with the old in with the new. i think you'll have to get a new one

Mitac Computers... | Answered on May 06, 2014 | 95 views


Go to http://www.mitac-europe.com/services/drivers.php

Mitac Computers... | Answered on May 27, 2012 | 244 views


SBA is the model number. Go to Mitac website to download the drivers that match your pc.

Mitac Computers... | Answered on Jun 04, 2011 | 109 views


This might help. CLICK HERE to see an ATX power supply pinout.

Mitac Computers... | Answered on May 16, 2011 | 427 views


What is the drive model and manufacturer. The Mitac MCH314 is a bare-bones chassis and not a system assembly. Please provide more information.

Mitac Computers... | Answered on May 14, 2011 | 69 views


They should be. Use Google to find a local supplier.

Mitac Computers... | Answered on Jan 24, 2011 | 77 views

Not finding what you are looking for?
Mitac Mio P550 Pocket PC Logo

31 questions posted

Ask a Question

Usually answered in minutes!

Top Mitac Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

matt
matt

Level 3 Expert

1650 Answers

Larry Ng
Larry Ng

Level 3 Expert

5994 Answers

Are you a Mitac Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...