Top 20
Zyxel VSG-1200 V2 Router Questions & Answers
When I connect the vsg1200
Hi, I experience also performance issues with the VSG 1200. Did you found a solution in the meantime? I already have the latest firmware installed. I notice that within the internal LAN ping times are sometimes too high to the device
My parents have a Zyxel router for their WiFi. The password was changed a while ago but they don't have a record of it. How can we find it?
If the modem your talking about is the ZyXEL Prestige 623R-T1 ( that i believe is supplied with iol ), follow the reset sequence below !
10. How to use the Reset button?
Step 1:
--------
Make sure the PWR led is on(not blinking)when you begin this procedure.
Press the RESET button for ten seconds (or until the SYS LED starts blinking), then release it. If the SYS LED blinks, the defaults have been restored and Prestige restart.
Otherwise, go to step 2.
Step 2:
-------
Turn the P623R-A1 off.
While pressing the RESET button, turn the Prestige on.
Continue to hold the RESET button.
The PWR LED will begin to blink and flicker very quickly after about 10 seconds.
This indicates that the defaults have been restored and the P623R-A1 is now restarting.
Not finding what you are looking for?