send it out to a professional. you need many precise metering tools to measure if everything reads ok, you need to replace other pieces that may not show physical damaged.

Orion HCCA-D5000... | Answered on Nov 15, 2013

1 Answer

I need power-supply circuit to fix my amp

U can send it back to the company they will fix it for a small fee

Orion HCCA-D5000... | Answered on Oct 16, 2013

0 Answers

How to reset esp light amp on directed D2205

Orion HCCA-D5000... | Posted on Mar 01, 2013 | Be the first to answer

0 Answers

How many subs will a orion hcca-d5000 push

Orion HCCA-D5000... | Posted on Jan 24, 2013 | Be the first to answer

4 Answers

i can make this relatively simple.
2 stages:
Stage (1) wiring the Sub inside the box;
Unscrew the SUB from the Box, (& undo the wires)
Connect both +Positive terminals on the SUB to the +Positive terminal on the inside of your BOX.
Connect both -Negative terminals on the SUB to the -Negative terminal on the inside of your Box,
Then screw the SUB back into the Box.
u Have just wired yr sub in parallel. any Amplifier will see it as 1woofer with 1OHMs resistance.

Stage (2) bridging your amp
(please check Amplifier instructions on which terminals to use)
generally you use "LEFT -Negative" and
"Right +Positive"
and connect to the corresponding terminals on the Sub Box.
Hope that helps someone.

Orion HCCA-D5000... | Answered on Jan 21, 2013

0 Answers

Orion hcca d5000 in protection

Orion HCCA-D5000... | Posted on Oct 29, 2012 | Be the first to answer

2 Answers

Ihave an orion 6000 what is the power rating of

Hello,
I am sure you have misread the number on the amp. Look again you should see 600D. here is the link to the PDF on your Amp. http://www.directed.com/guides/manuals/og/orion/G47395.400.405.410_11-04.pdf

I hope this helps if not I will try to down load it for you and post it directly to the reply.

Roy

Orion HCCA-D5000... | Answered on May 21, 2012

1 Answer

If part of the board

ya get a different amp an replace it . but good luck trying to find another one

Orion HCCA-D5000... | Answered on Jun 22, 2011

0 Answers

Amp goes into protection straight away.There are n...

mines does the same i just think the amp is poorly made get it bench tested

Orion HCCA-D5000... | Answered on Sep 05, 2010

1 Answer

I have a d5000 that is going into protection mode

just take it to a authorized orion dealer

Orion HCCA-D5000... | Answered on Sep 05, 2010

1 Answer

I have a orion hcca d5000 and keeps going into

yes mines does the same and everyone keeps saying check the ground upgrade to the big three and so on personally i think this series and there new amps are just junk. Mines been in protect since i got it two years ago, once inawhile would turn off with big bass drop and now the amp doesnt really work in master switch but works on the slave i just think the amp was built poorly so, my advice get it bench tested before you do any new upgrades

Orion HCCA-D5000... | Answered on Sep 05, 2010

1 Answer