20 Most Recent
Questions & Answers
Camera want flash sony dsc-h3
If it flashes when you take any photo then you have the flash set to manual override for each shot or you're just shooting in areas too dark for any photos without the flash. Check your flash settings or try a factory default reset from the camera's menu options.
on Jan 05, 2015
Pictures still blurry
Instead of green auto mode set to P mode and chagne the flash setting to non auto.If flash is is in auto mode flash will not fire and picture will be blurry.So your flash must fire every time (and it must not be decided by camera's auto flash mode).
I am sure this will solve your settings.
Please rate if satisfied.
on Oct 05, 2013
Macro Invalid :(
hit your menu button. go down to setup. in the setup menu there is a tab for "Conversion Lens". make sure it is not set to "Close Up". i have mine set to off because i am not using any conversion lens.
on Apr 11, 2013
DSC-H3 does not focus a subject properly as compare to the begining. The picture is blurred in autofucus mode as well.
Your concerns about the mechanical/physical integrity of the components may be valid. However, it could be a simpler, and less stressful problem altogether.
I recommend, you get hold of a micro-fibre cloth. And, blow at the lens, and clean it in circular directions. As your camera appears to be quite old, I recommend cleaning the lens, as it could have gathered dirt, or dust.
There is no focus sensor, as such. There is however an autofocus motor. Which could be the problem. However, let's take it one step at a time.
Hope I was of assistance.
on Feb 21, 2013
It keeps saying my sony
Press the "Home" button, go to "Settings" (last menu item at right), then "Main Settings", and use the "Initialize" button.
Macro is not available in landscape mode, twilight mode or fireworks
mode, if you try to use macro in any of those modes it will say invalid
on May 10, 2012
Not finding what you are looking for?