20 Most Recent Curtis DVD-7600 DVD Player/VCR Questions & Answers

0helpful
1answer

Now, when I insert a

Please try to put in an ordinary audio CD track and see if this is detected. If yes the optical is working, if not there is no laser scanning and the possibility of the head being faulty is high.
Certain cleaner disks may not work but the best is to cleaning manually the laser head eye with a cotton bud, very gently and without pressing of the lens eye.
If there is still no result then watch the CD if it spins or tries to spin. If the head unit moves up or down to focus or in and out of the drive, if so the board seems to work correctly and the possibility that the optical head unit is the suspected fault.



1/5/2011 10:29:00 AM • Curtis DVD-7600... • Answered on Jan 05, 2011
0helpful
1answer

Tape got stucked

check the tip in my profile
7/18/2010 3:22:49 PM • Curtis DVD-7600... • Answered on Jul 18, 2010
0helpful
1answer

What head cleaner is best for vcr unit? wet or dry

Dry, because there is the risk of corrosion if you would be using a wet one.
4/5/2010 8:01:08 PM • Curtis DVD-7600... • Answered on Apr 05, 2010
0helpful
1answer

Can hear the sound but the screen is black

check the connection wire to the video output of Player to the input of your screen. or use audio wire instead of video.
11/25/2009 10:35:28 AM • Curtis DVD-7600... • Answered on Nov 25, 2009
0helpful
1answer

The machine will not turn on. It just says hello

fuse problem just diconnect the main cable for 5 minutes
11/10/2009 1:17:56 AM • Curtis DVD-7600... • Answered on Nov 10, 2009
0helpful
1answer

Lost manual for Curtis 7600 Dvd Player/Vcr Combo.

It's available for download:

http://curtisint.com/html/CustService/Manuals/CUR_DVD7600_ENFR.PDF

5/10/2009 5:46:29 PM • Curtis DVD-7600... • Answered on May 10, 2009
0helpful
1answer

Need a Code Number to work with my Dish

1 - Hold the clear tv buttom until all 4 light flash red
2- Press the red tv buttom
3- Press the amount of time needed on the up cursor ( around select buttom) until your tv shut down
4-When the tv goes off press the search buttom ( at the end on the right side )
5-Press record

Then u can use the red tv buttom to control ur tv and u can control the volume on satelitte mode without going back to tv mode , if u press too much time while searching the code and the tv wont light back , do the same thing but instead pressing the up cursor press the down one to go back on the code it will be faster .


This way of finder code make the remote search 1 by one , usually dvd and other things else than television dont work , but give it a try might work but probably will just power on and off not more than that but will work fine with ur tv
2/25/2009 4:21:23 AM • Curtis DVD-7600... • Answered on Feb 25, 2009
0helpful
1answer

Problem with dvd player in combo curtis dvd vcr

try to clean the lens with a cd/dvd cleaner available at your local stores. just insert the cleaning disk and wait until it's done. hope this helps!
12/28/2008 2:58:57 AM • Curtis DVD-7600... • Answered on Dec 28, 2008
0helpful
2answers

Curtis DVD-7620 (7600 series) Combo VHS / DVD Player - what is remote code?

@turnhob
your tv remote should have universal capability you can find the code on it's manual if the brand is supported
11/23/2008 2:42:30 AM • Curtis DVD-7600... • Answered on Nov 23, 2008
0helpful
1answer

Black square (parental Control??)

You'll have to go into the menu setting of the VCR and turn the controls off, also you can try completely unplugging the VCR and then plugging it back in again to see if it goes away.
11/13/2008 9:19:44 PM • Curtis DVD-7600... • Answered on Nov 13, 2008
0helpful
1answer

Cannot get VCR/DVD to play

I've had dish before, in essence, it needs to come from the dish to the dish receiver box, outta the receiver box, and then into your TV. Hope this helps.
11/13/2008 9:17:52 PM • Curtis DVD-7600... • Answered on Nov 13, 2008
0helpful
1answer

No picture on VCR/DVD

Try to use AV cables they work better than RF cables in my opinion. AV out to TV in works everytime.
11/13/2008 9:15:17 PM • Curtis DVD-7600... • Answered on Nov 13, 2008
0helpful
1answer

I cant program channels into vcr

make sure the antenna cable is plugged in to the vcr
10/15/2008 1:53:14 AM • Curtis DVD-7600... • Answered on Oct 15, 2008
0helpful
1answer

Shows only half a picture

try to press the zoom button
10/15/2008 1:50:00 AM • Curtis DVD-7600... • Answered on Oct 15, 2008
0helpful
1answer

Universal remote

the code should be in the manual of your universal remote. see the brand or maker of your unit and check it on the remote manual
10/15/2008 1:48:51 AM • Curtis DVD-7600... • Answered on Oct 15, 2008
0helpful
1answer
Not finding what you are looking for?
Curtis DVD-7600 DVD Player/VCR Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Curtis Televison & Video Experts

Brad Brown

Level 3 Expert

19187 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Ngoro

Level 3 Expert

3523 Answers

Are you a Curtis Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Curtis Televison & Video

  • Curtis Televison & Video

Most Popular Question

machine will not turn just says

  • Televison & Video
Loading...