Sylvania LD370SS8 37 in. LCD Television - Page 2 - Answered Questions & Fixed issues

I would suspect either some capacitors failing in the power supply, a bad solder connection, or a component drawing too much current. Replacing the power supply may fix it.

Usually you have a MENU, OK, < & > maybe a + & -, these will be on the edge or top of the set. Or under a flap. There MUST be controls such as this somewhere.

The most common problem is the transformer inverter board. The small transformers power up the LCD screen. If one blows out, the TV goes into protection mode like it's doing right now. Your Tv may have 8 of those on a power inverter board. It' a good thing your under warranty, because I believe the board costs over $250.
If possible, I would like to buy your bad board when they replace it.
My e-mail is [email protected]

Try website 1-800-Remotes Factory original,buy the exact remote.Hard to find codes in un popular tv models.

Go to menu reset the Audio setting.If not work ur speakers is cold solders or blown.

your lcd panel is failing and will need to be replaced

Get the HD 1080i when the show, show that,can't set to it.Want more show 1080i subscribe the satalite or cable HD packages.

TRY THE PHILIPS PARTSTORE.COM.

if you are using a digital sat receiver that is spanish not all the channels will come in english , ill assume that your living in spain and have digital+

for the sound problem use a scart cable then check the sound settings are set to normal

post back if your still having problems

change the screen , this is best solution

or coat with posporus material

the tv only weighs 55 lbs yes those are the holes 4 of them your bracket may have other screws if the bracket is thick

No, because screen casting wasn't invented and it isn't a Smart television. Time for a new one.

Here are some troubleshooting tips to try. However, as it is an older set, if these tips fail, the cost of a repair at a shop might exceed the value of the TV. In short, a new TV may be in the works. Cross your fingers. One of these tips may work. Let's troubleshoot the issue and try to get it working: If you are using a remote, check the batteries in it. If you are using several remotes with it, try the alternative remote. Sometimes there is a glitch affecting the remote for a Roku where it won't turn on the TV other than a powered black screen and you have to use the other remote to turn it off and back on and then the Roku screen pops up. I have not sorted out why. Check Power Cord and Connections: First, ensure that the power cord is securely plugged into both the TV and the electrical outlet. If you suspect a faulty power cord, consider trying a different one. Reset the TV: While most Sylvania TVs don't have a dedicated reset button, you can perform a manual reset: Unplug the TV's AC adapter from the electrical socket. Press and hold the Power button on the TV for 20 seconds. Plug the AC adapter back in and turn on the TV. Check Audio/Video Cables: Inspect the audio/video cables connecting your TV to the satellite or cable receiver. Ensure that the color-coded prongs match their respective connecting points. Correct any mismatches (e.g., white cable into a red port) by reorganizing the prongs. Inspect Coaxial Cable: Look for the coaxial cable on the rear side of the receiver, attached to the port labeled as ANT IN. Confirm that the connection is firm; a loose coaxial connection can cause display issues. Tighten the cable by pinching the silver band on the end and rotating it clockwise until secure. Check for Interference: If distortion continues on the TV screen, consider nearby interference. Power-hungry appliances can cause electronic interference, affecting display quality. Visit a Repair Shop: If the above steps don't resolve the issue, you may need professional help. Some technical faults, such as a blown fuse or faulty capacitor, require expertise in dismantling and soldering. If uncomfortable with such tasks, consider visiting a repair shop

1. Auto Code Search:
   • Turn on your Sylvania TV.
   • Press and hold the "Code Search" button on your Philips remote until the indicator light stays on.
   • Press the "TV" button on the remote to set it to control the TV.
   • Press the "Power" button repeatedly until the TV turns off.
   • Press the "OK" or "Enter" button to save the code.
2. Manual Code Entry:
   • Find the code for your Sylvania TV in the Philips remote control manual. If you don't have the manual, you may be able to find it on the Philips website.
   • Turn on your Sylvania TV.
   • Press and hold the "Code Search" button on the remote until the indicator light stays on.
   • Enter the code using the number buttons on the remote.
   • Test if the remote now controls your TV. If not, repeat the process with a different code.
3. Try Common Codes:
   • Some common Sylvania TV remote codes for Philips remotes are 0810, 1684, 1886, 2183, 1081, 1172, 1196, and 2049. Try entering these codes manually.

it is a very simple TV, is TV connected to cable? Here is link to manual copy and past download and save for future reference. It is very old and has CRT not LCD. https://www.manualslib.com/manual/776815/Sylvania-Sylvania-Ssc092.html#manual

More likely you hit the Source / Input button and lost the signal. Press it again until it comes back.

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote 4-Digit Sylvania TV Codes for Universal Remote

• 0002.
• 0008.
• 0030.
• 0054.
• 0068.
• 0096.
• 0171.
• 0321.

More items... • Jan 1, 2023

RCA Universal Remote Codes For Sylvania TV - GenTwenty

By typing the correct pin or activating a factory reset.

The Sylvania LC260SS2 has a eArc option called fun-Link. This only works with other fun-Link compatible devices. See https://www.manualslib.com/manual/325827/Sylvania-Lc260ss2.html?page=14#manual . (Sylvania TVs are made by Funai Electric.) It may not work with non-Funai electronics. I hope this helps. Cindy Wells