Hi, you have to switch off the machine for some minutes. After restarting push the "SET" and "OK" together and you will get the service menu, where you have to change "EUR" to "EURN".
If the service menu doesn't activated you have to remove the calbe of display from control unit for some minutes and restart again.
The Thermocouple safety device needs replacing. The thermocouple usually has a pilot light deflector over it. Make sure it hasn't moved or fallen off, or rotted out.
Please always include full 'make model (what it is)' as first 3 words in every question.
https://www.google.com/search?q=TEB21Y
..
This could be due to various reasons such as power fluctuations, overheating, software glitches, or hardware malfunctions. Have you tried checking the power source, ensuring proper ventilation
Dependant on age and use, the piezzo cell is either clogged up with condensed cooking steam/grease or the control panel is faulty.
There is no adjustment unfortunately.
It helps to have FULL make and model, but here are a few.
F7 error code can be a result of a faulty wire harness (short-circuit), defective heating elements or oven sensor. A qualified service technician will need to have a look, determine faulty part then replace or repair it.Apr 27, 2023
The F15 error code on a Fulgor Milano oven typically indicates a problem with the temperature sensor or the wiring between the sensor and the control board. Here are some steps you can take to troubleshoot and fix the issue:
Turn off the oven and unplug it from the power source.
Locate the temperature sensor, which is usually located near the top of the oven cavity and is a small metal rod protruding from the wall.
Check the sensor for any visible damage, such as frayed wires or a bent or broken sensor.
Use a multimeter to test the resistance of the sensor. The sensor should read between 1000-1100 ohms at room temperature. If it is outside of this range, it will need to be replaced.
Check the wiring between the sensor and the control board for any visible damage or loose connections. If there is any damage or loose connections, repair or replace the wiring as necessary.
If the sensor and wiring appear to be in good condition, the problem may be with the control board. In this case, the control board may need to be replaced.
If you are not comfortable performing these troubleshooting steps yourself, it may be best to contact a professional appliance repair technician for assistance.
If your Gordon Bleu oven's element stays red after turning off, check the thermostat, control knob, and thermal fuse. If issues persist, seek professional help for a safe and effective solution.
