Jwin JD-VD141 DVD Player - Answered Questions & Fixed issues

Hi,
Just check and clean the lens and retry your disc. If nothing change, replace your lens with new one.

no volume at all

Ever find an answer to this? I am having the exact same problem right now!!

Picture but no sound is common and there are loads of ways this could happen.

Check red and white cables haven't been swapped and are in the right places in both machines, tv and source. A good way to test is to make sure red cord is in red input on tv and that the correct AV channel is on (ie you have picture) then try each output from source (DVD player, sky, etc). If none give you joy there could be a problem with the AV channel you're using so switch to another, ie change from AV1 to AV2, and then start again.

With the DVD tray open, press 9735 on remote. A menu will pop up, arrow down to Region, then arrow right to highlight the desired region (0 for all). Press Select, then arrow down to Exit Setup and Select again.

Somehow we were able to get it fixed ourselves. We pressed the SETUP button on remote, then pressed the DOWN button 4 times then press the RIGHT button, then ENTER button for factory default setting.

i would like the code for this jd-vd141 dvd player

Don't buy a Universal Remote, buy one that is made as a replacement for your model. That is called a Facsimile Remote. https://www.google.com/search?q=jwin+DVD+surround+player+replacement+remote The search query is 'make model replacement remote'. ..

Easiest solution https://www.ebay.com/itm/254412509250

Troubleshooting - jWIN JX-CD335 Instruction Manual [Page 6]

https://www.manualslib.com > ... > Instruction manual Replace all batteries. CD Player will. The AC adapter not. not turn on. connected properly. Disc inserted. incorrectly. ..

the fuse marked F-1 or, F-2

Replace its main system control memory IC, and make an initialize. If you wish to get more details, surf the following link. There are over two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help. You can get a solution there. Type in the brand name to your device to its search box, can be located at the top right of the display window. It will make search easy. More than Nine Lakh viewers cannot be wrong.http://electronicshelponline.blogspot.com/

If cleaning did not fix it the optical pickup for that unit is damaged in some way---if the set has audio/video INPUT jacks on it just buy a DVD player and hook it to the set.If no jacks you are finished--DVD portion of the unit if available costs more than the entire set.

You may want to try cleaning the drive using a drive cleaning disc, otherwise it's probably time to get a new one.
-=/ MLFnet /=-

Hello,

Most online stores don't have the power cord for your Jwin portable dvd player -JD-VD753/743. The below link is the best I can get amongst online stores.

http://www.bizrate.com/miscellaneous/jwin-portable-dvd-player/

Also, we don't stay in the same vicinity, so I wouldn't know precisely where you can get the power cord. But I believe there should be an electronic accessories store in your area. Try there and you should find a power cord for your Jwin portable dvd player.

If you don't find the exact adapter, you should at least find a closely related power cord with the same voltage or a universal power cord.

Good luck.

Not the tv,it the brocasting incoming signal cable have a slice matalic contacting to that procise prequencies problems for that channel.Take another tv used it,with that incoming signal for that channel for a few days.See,if have a same problems have happen to another tv?Yes,than call the Cables,Dishes or Telicoms compannies,change that section of the incoming of broscasting signal cable line.Not,than take a piece of sand paper about 1000 grits,rub the input metal pin a few times,to have it better contact.

Check the sensor with any camera pointed at ir sensor on remote
It should be giving no light when the remote is not in use...
If there is constant light some button is stuck...and if that;s the case open the remote and clean contacts...

The most obvious reason is an overheating issue in the Power Supply board. There are other ideas here, but you need to take it to a television engineer to diagnose https://www.google.com/search?q=television+will+suddenly+turn+off+every+4+minutes ..

Check the internet connection. The television can't update if it can't see the internet. Resetting it breaks the previous settings. Just for fun, reboot the router as well and wait 15 minutes until all the lights come back on. Then reestablish the television connection to the router. Harwa is not a make we know here in North America. https://www.google.com/search?q=Harwa+Smart+television.+How+to+restore+Apps ..

general steps: Get the TV remote control and push the "Menu" button and select "Options". Select "Child Lock" from the "Options" list. On some televisions, the "Child Lock" is named "V-chip". Choose the "Remove Child Lock" selection. Highlight this and then hit the "Enter" button. Enter the four-digit code that you used when you activated the child lock feature. If you cannot remember it, your only option to deactivate the child lock is to reset the TV. The instructions for resetting a TV is written on the user's manual of the TV. Exit the TV menu once you have entered the four-digit code. To do this, press the "Exit" or "Menu" button on the TV's remote control. If you don't have a remote, you might try leaving the TV unplugged overnight. Some TVs will 'forget' their settings if left without power for a long period. You could also potentially buy a cheaper universal remote, and use that to turn off the child lock.

To pair your Ruwido Amadeus R 9710 remote to your TV, you can follow these steps: Insert Batteries: Your remote is powered by two 1.5 V AAA batteries1. Make sure to insert the batteries correctly. Switch on your TV: Ensure your TV is turned on. Press the TV key: Press the TV key on your remote control for approximately 4 seconds until the LED flashes twice. Enter the Code: After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list provided with your remote2. After entering the code, the LED will flash twice indicating that the code has been accepted. Test the Remote: Point the remote control towards your TV and press the key. If your TV does not respond by going into Stand-By mode then repeat steps 3 to 5 and enter the next code in the list. Bed.-Anl. H2 Version1 (ruwido.com)