20 Most Recent Brother HL-4040CN Laser Printer - Page 8 Questions & Answers

Hello,

To reduce the memory requirements you can lower the resolution of the print and graphics. These settings will be under the printer properties page. Go to control panel, click the printers icon, right click the Brother printer and go to properties. There you will find the settings to lower the resolution or DPI, the lower the setting the less memory but also the lower the print quality. You can change it and print a test page to see how it looks.

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

need more information about printer?
is it new ?
did it come with expansion memory slot

can you see printer properties and reset the print setting
as in RAW print or other print queue options

This message will appear if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one

Hi there

The Fuser is the ink powder that is in the printer, you may need to buy a new one as it may have run out.

All the best Pineworks

reset part life. turn on printer, Open front door, Press and hold cancel, press reprint. Now scroll through menu of toners h=high yeild and s=standard. press ok and ok again to accept. close door.

You have to replace the drum unit. Depends on the machine if it can just be reest.

Hi
Please download the Service Reference Manual, Parts List, and Service Manual from the bellow side to fix the rear fuser cover of your printer

http://www.service-docs.com/store/catalogue.php?cat=128&exp=&resultpage=3

Let us know if you were looking for something more else please accept the suggestion.
Thank You for contacting Fixya.com

Check whether the balance load sensor is faulty or not or check pump/filter for blockage

MFG Part #: LU4103001

i have brother 4040cn printer but its not working any more its showing me no paper load paper in multi purpose tary.
so fi any one there for help me please help me .

thank you

Hello,

Yes, The drum units have a set number of copies before they need to be replaced. This printer has a drum life of 17000 pages. The part number for the drum is DR110CL Just do a Google search or check your local office supply store.

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

That error happens when the fuser goes out, could have a dead lamp or just an open thermistor or overtemp device. You will need a new fuser to clear the error, check www.precisionroller.com for price and availability.

The instructions to reset the drum after changing are packed with the new drum, and the belt unit is the transfer belt that also wears out and needs changing periodically. The instructions are packed with that also and not hard to change.

did you cleaned paper tray with alchol ? and did you checked other parts ?

Yes, from the driver.

You will need to replace the Drum unit with a new one.

To try to get it working for a short temporary fix, clean the Drum corona wire - might work, might not

There is a setting in these which produces this effect - draft printing? Something like that. In the PC printer software somewhere there should be a screen which allows you to choose the type of print you want. It may be available when you want to print. For images the quality should ALWAYS be 'Normal', or high quality.

From the manufacturer's web-site:

http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=hl4040cn_all

select and download and install the device-driver.

From the manufacturer's web-site:

http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=hl4040cn_all

download and install the driver.