20 Most Recent LaserJet 4730xm All-In-One Printer - Page 2 Questions & Answers

Go to Philips.comsupport, and click on "contact". Have the full product number available. Pose your question to Philips. Usually going directly to the source, will bring you the best results.

Reset error code
in service mode

If you wish to get some details; check the site linked here. Pull up older posts.... http://electro-medical.blogspot.com/

This error occurs if you forget to remove both the shipping tape and the locks from the cartridge. Remove the cartridge from the printer and look for orange tabs. There should be three of them. If they have been removed then you may have a bad cartridge, try installing a different cartridge, if second cartridge fails then likely it is a problem with the printer.

have you unplugged it and turned off the computer and restarted if essentially you have it hooked to it?

Go to manufacturer website for download.

The motor ratings are also required to help you , if it is a custom made motor then you have to obtain it from the equipment manufacturer

Most likely you will need to replace the fuser. Try plugging the printer in to a different outlet than it is right now. If you get the same error then you can be pretty sure the fuser is bad.

Here you go:

Dera Open the back cover, at main controller PCB assy. you will find the HDD. disconnect and unscrew it . However the HDD is encrypted its very probably impossible to extract the data in case its used with canon. Thanks.

Dear As the OS is different do load the driver at vista pc. Thanks.

First, check the fuser. It should be hot to the touch (be careful).

Dear You can choose any printer having printing resolution more than 600 DPI. For screen printing the jobbers prefer for resolution from 300 DPI to 600 DPI. Thanks.

Dear Rajendra You can choose any laser printer with printing resolution 600-1200 dpi. According to the type of toner non-magnetic toner will perform the best and lasts long without deterioration of its color. Before buying the choosed model you may download the driver and verify the setting procedures to confirm. Also if you are going for prepare for master the driver setting should have option for lower the dpi up to 300 , in case of screen print application. Few manfs are hp,canon used magnetic toner where as samsung,brother,konica minolata etc. are used non-magnetic toner on their low/ middle segment. Thanks.

HP Support & Drivers

Hi there,

Here is your download page.

http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=LEXMARK_E260&page=product#2

Have a great day.

Marcus

Hello,

it is called "Lever" and not Level.

Check the below link, a direction of how to locate the lever of your Lexmark C752 is stated there with the aid of a diagram.

The link is in PDF format and it might take some time to completely load, so be patient still the page finish loading.

Also, the font of the link page might be small, in order to increase it, press and hold control on your keyboard, then press plus (+) sign, this will increase the font of the page, then press minus (-) to reduce the font.

Good luck.

Hello Mr. brown; Try to open he back cover .remove the fuser unit out , and check is there have anything stuck on the roller try to turn the roller few round see the noise come from where then go to fix it.

go to settings and change the left margin to 0.0. if in Word, then file->page setup and set the margins to what you want, left margin to 0.0 in your case.

This link is the best I can come up with: How to fix E6 & E7 on Trojan treadmill solved!! (youtube.com)