Top 20 Philips 50PFP5332D 50 in. Plasma Television Questions & Answers


bad power circuit may cause such problems.

may be power ic or bad capacitors.....

Philips... | 78 views | 0 helpful votes


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Philips... | 147 views | 0 helpful votes


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Philips... | 278 views | 0 helpful votes


It sounds like you have a problem were the Y sus/buffers board (the one on the left ) has issues with the connectors to the screen need unpluging cleaning and putting back

Philips... | 51 views | 0 helpful votes


Well if the power supply board alone is making the same then clearly the problem is in it.

I can't tell you remotely what makes the noise and why is it shutting down.

I've seen them make noise because of a shorted diode in the PFC circuit, because of a failed capacitor in the Vs or standby circuit, because of a cracked solder joint in some of the large transformers or because of a worn out filter capacitors. Oh, and because of a failing thermistor at the board's input, but that's usually accompanied with smoke and is easy to detect, plus it only happens once or at most twice.

If course it may as well be something else.

The best I can do is offer you to send the board to us for inspection and repair.

This should be the board and the repair service we offer for it:

http://www.coppelltvrepair.com/p/215/lj92-01511a-996510019427-power-supply-board-philips-50pfp5332d-service-repair

Hope that helps!

Philips... | 163 views | 0 helpful votes


No place to put your RGB on the PC or on the TV? Your TV should have an RGB port for sure. The "green" may be yellow instead.
Your PC will need a video card installed that features a RGB output to make it work from there.
Some PCs use DVI out instead. You would then need a DVI/HDMI converter to plug into your TV's HDMI port and then to the PC.

Philips... | 81 views | 0 helpful votes


The experience I have seen with this model is on the power supply module, near the lower center of the board, check for two swollen 3300Mfd 10V capacitors, change these two parts and you might correct the issue. The board is perhaps part number LJ44-00108.

Philips... | 133 views | 1 helpful votes


Go into tv menu and do reset. That is if you want to reset every thing. i'm not sure what you think rebooting is?

Philips... | 96 views | 0 helpful votes


Sounds like a power board has blown inside the set. Take it to a repair shop.

Philips... | 50 views | 0 helpful votes


If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/

Philips... | 40 views | 0 helpful votes


hi, capacitors, they usually swell up or a shorted diode/ transistor and may be a bad dry solder joint, good luck with the repair

regards
shaun

Philips... | 23 views | 0 helpful votes


Main board is likely to be faulty. Contact the authorized service center for Philips. This is not a user reparable fault. So many adjustments are there, after the main board repair/replacement. If you wish to get some details, check the site linked here. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/

Philips... | 45 views | 0 helpful votes


Plasmas are notorious for a slight humming or buzz that emits when they are on...
A clicking sound when plugged in isn't nececessarily bad. However, the picture not working is bad and this may require a technician.
Are you using the proper power cord that came with your tv? Are you able to use the included remote or use the power buttons on the television itself?
Has the tv been moved or dropped recently?

Philips... | 54 views | 0 helpful votes


After doing some research online for black lines on a plasma tv i see that the cause on some was a loose connector inside the tv

Philips... | 269 views | 0 helpful votes


Look for the digital audio out port on the TV. It has a rubber plug covering it to keep dirt out. remove that plug and connect the sound bar.

Philips... | 37 views | 0 helpful votes


There are several possibilities here.

If the picture is very dark and blotchy you may have a bad X-MAIN (ZSUS) board.

It can also be the Y-Main board, but less likely, it usually fails in a different way.

Here are a few useful repairs for your TV we offer:

http://www.coppelltvrepair.com/search?Q=50PFP5332D&As=false&Pf=&Pt=&Sid=false&btnsearch=Search

(Basically just a search of the TV model at the site to see what it comes up with)

Hope it helps!

Philips... | 47 views | 0 helpful votes


Let it be. It's a good practice. Keep an other Hair Dryer. It will be best for you I assumes. Can you troubleshoot its main power supply regulator board. If so, google.com/+GopakumarGopalan check this link, and come over to me.

Philips... | 43 views | 0 helpful votes


To know more about this just get into the site linked here. It is too much to type in here about the setup procedure, and is not practical. If you're sound in electronics, and wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Flip card, can be selected by the drop-down list, by the top left of the display window, will make surf easy. You can also do a search, by type in the brand name / model number / IC used, in the search box at the top right of the display window.
google.com/+GopakumarGopalan

Philips... | 57 views | 0 helpful votes


These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/

Philips... | 25 views | 0 helpful votes


Very difficult to predict, what might be the fault to your Philips TV. It will be best to contact the authorized service center for Philips. google.com/+GopakumarGopalan

Philips... | 29 views | 0 helpful votes

Not finding what you are looking for?
Philips 50PFP5332D 50 in. Plasma Television Logo

342 questions posted

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Philips Televison & Video

  • Philips Televison & Video

Most Popular Question

power light but screen staying blank

  • Televison & Video
Loading...