20 Most Recent
Philips 50PFP5332D 50 in. Plasma Television - Page 2 Questions & Answers
1 Answer
Clicking sound when you plug it in. picture won't come on
Plasmas are notorious for a slight humming or buzz that emits when they are on...
A clicking sound when plugged in isn't nececessarily bad. However, the picture not working is bad and this may require a technician.
Are you using the proper power cord that came with your tv? Are you able to use the included remote or use the power buttons on the television itself?
Has the tv been moved or dropped recently?
Philips...
|
Answered
on Dec 24, 2013
2 Answers
Philips 50 Inch Plasma Model 50PF7320A/37 will not turn on
Commonly it's going to be a power supply related problem. The two boards that need to be looked at is the Main Power Supply Board or the power supply board for the screen. The one that powers the screen, some manufactures call it a Backlight Inverter Board.
If you have some electronic experience, you can sometimes find a Service Manual for the TV over the internet for less than $20. It will have the all resource material for repairing your TV model. It's just the matter of replacing the bad part on the circuit board.
Philips...
|
Answered
on Dec 22, 2013
1 Answer
Plasma TV Philips 50". I cant enter to setup for
To know more about this just get into the site linked here. It is too much to type in here about the setup procedure, and is not practical.
If you're sound in electronics, and wish to get more details,
check this link.
http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic
/ Flip card, can be selected by the drop-down list, by the top left
of the display window, will make surf easy. You can also do a search, by type in the brand name / model
number / IC used, in the search box at the top right of the display window.
google.com/+GopakumarGopalan
Philips...
|
Answered
on Nov 01, 2013
1 Answer
Philips TV, Model Number 50PFP5332D/37, the screen starts out all black, but then slowly the black starts to dissipate and the picture starts to come through. However, the picture is all gray & fu
You more than likely heard a pop noise when this failed, the infamous pop of death when the Y sustain module fails. First check the various fuses located on the Y and X sustain modules. If a fuse is open you have lost the large IC on either PC board. These boards are located left side 3 module and far right side module with ribbon cables attaching to display panel. This can be a complicated repair due to one of the buffer modules failing, The Y sustain will be identifies by Samsung drawing number LJ92-01200A, The Buffers are LJ-92-01202A, LJ92-01203A. This is most likely a job for a pro because 1 of or all 3 modules can be at fault. Some services on e-bay for these modules offer rebuilding the Y-main module and also testing the Y-buffers. If you want to DIY this TV this would be the best Idea, send three boards to a rebuilder on E-bay.
Philips...
|
Answered
on Mar 06, 2013
Not finding what you are looking for?
