20 Most Recent Motorola Mobility MOTORAZR2 V9 Cellular Phone - Page 7 Questions & Answers

COULD BE THE PHONE BUT MOST LIKELY ITS THE CHARGER, IF ITS AFTERMARKET GET RID OF IT AND BUY OEM, TRY AND TEST IT OUT WOULD A FREINDS MOTOROLA CHARGER SINCE THEY'RE MOSTLY THE SAME CHARGERS AND SEE IF YOU STILL GET THE MESSAGE.

springshicke, Well you did not mention what you trying to do (transfering or anything) But here is some. If you are trying to transfer your pictures to your Laptop. First if your Laptop is WINDOW XP as in mine its FULLY SUPPORTED it supported via BLUETOOTH OR USB DATA CABLE TRASNFER. All you have to do is the following:Configure your MOTORAZR2 V9 with your Laptop. Using USB Cable >OPEN Control Panel> Double Click ADD hardware then follow the Installation Wizard Instruction it will guide you what to do. In Blue Looth Link make your MOTORAZR2 V9 ready by switching BLUETOOTH to ON> Select FIND ME on laptop side RIGHT CLICK Add Bluetooth Device. When the window opens CHECK MY DEVISE IS READY then CLICK NEXT (Make sure your Hand phone is set to FIND ME and you,ll see your Hand phone and Laptop will communicate) The follow the Installation Wizard it will say ADD> NEXT> and OK  

You need to reinstall the mobile software as its corrupted ,you get it done by the phone company if its still under warranty ,or give lcal mobile repair center and get it fixed........

Good luck...

hi,

try removing the battery of the unit for an hour, remove the card. then turn it on

let us know

clean pcb boar specially keypad board.. check vol. swicth and all switch located at side of fone if shorted...

there is a problem with your jack get it repaired

in the phone itself, you have to search for bluetooth devices and accept the found device in order for it to work, once set-up searching is not needed for that device again

bring it to the professionals to work with it.. you may damage your fone if you alone...

try to reformat the sd card to the required FAT 16.... use a computer..and sd card adoptor for you to connect the card to the computer

tnx

you have to have the software and driver for your fone to work in your computer.. go on line and look for for the brand you have and download the soft and driver...

is there a choice to say yes or no? choose yes. it merely inform you that your phone is sending information to the internet. kinda safety feature informing you that the phone is sending data thru internet.

first insert a memory card and change parameters as save recordings on the memory rad its in the settings of camera!!

Standard bluetooth codes are "0000"

If this does not work then the next 2 industry standards are "1111" and "1234"

You should be set for 95% of the devices on the market with the first.

Sounds like a defective phone take it back to your carrier for warranty replacement.

it is the resolution. most camera phones that have video were not made to broadcast anything big. the camera was made to be able to make videos, but not to watch them on a big screen, just to send them to others or to watch them yourself

if you are taking pictures from a TV screen or the old TV like computer monitors any camera has that trouble, if not that maybe should take it a phone technician have them look at it

first of all you select the photo you want to move onto the memory card and click OPTIONS, then go MANAGE and click MOVE. Then you will get to options MEMORY CARD and BLUETOOTH, click on MEMORY CARD and it will copy to your memoey card. this will work for any pictures, music and videos you want to move onto your memory card

how can i unlock a Motorola MOTORAZR2 V9 locked by at & t

My suggestion:

First take your BT device (Not the phone), and hold down the pwr button until the light stays on constant (this is "find me" mode for most BT devices like headsets).

Next on your V9 goto your Settings/Connections & select Bluetooth, then scroll righ (or select options) to search for your device.
Once your device shows up in the screen selct it by hitting the center of the nav key and it will ask for a passkey wich is normaly "0000".

You should then be paired.

http://developer.motorola.com/products/handsets/motorazr2v9/

the drivers are here in this link under section tools
sdk
studio drivers