20 Most Recent
Frigidaire FFC1311DW - Page 6 Questions & Answers
Frigidaire fridge FPHN2899LF2 is completely dead, no lights, compressor not running. I replaced Main control board -still dead.
Be aware the fridge works with deadly voltages. If you have not enough technical knowledge, please don't do this yourself.
With a multi meter you can measure if the voltage you apply is entering the fridge. There is not much in a fridge. You find a on / of switch, a thermostat en mostly an override switch too short a thermostat. So if you measure a voltage coming is, follow the wiring and check what the thermostat does. if it won't switch you have the cause. If it does switch, follow the wiring, and if the aggregate gets a voltage and does not run, you have a defective aggregate. I can't think of more.
Good Luck.
Can a 2016 frigidaire profile located in a garage in New York be kept on when the outside temps in the garage where located gets in the low 30's
There is some truth to it. Refrigerant needs to flow from high pressure to low pressure, and refrigerant pressure is directly proportional to temperature. Once the temperature drops below 40*F, for the outdoor coil, refrigeration efficiency is lost. Some heatpump units need auxiliary heat because.
Cold refrigerant condenses, into a liquid, and a compressor will not compress liquid, why its valves and internals would chatter into pieces. There is such thing as compressor crank case heaters, or belly band heaters. A heater removes, evaporates liquid refrigerant from within a compressor, it is protection.
I would get a compressor heater, wraps around the compressor belly, near 50 watts, and can use a relay to switch off the heater when the compressor runs, or let the heater work continuously.
Not finding what you are looking for?