20 Most Recent
Mirage Omni S12 Subwoofer Questions & Answers
I have power but no sound. I have hooked up
Lack of sound as you have confirmed, lies in the sub. the sub is faulty. check the sound I.C in the Sub and the output side If and only if you are a quarlified technician. Else, a technician needs to help change the output I.C and check the transistors likewise.
How do I change to degree mode on my porpo YH-2000
- Power Off: Turn off the device.
- Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
- Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
- Power Off Again: Turn off the device once more.
- Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
- Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.
If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.
Not finding what you are looking for?