20 Most Recent Jenn-Air SCE30600 Slide-In Electric Kitchen Range - Page 8 Questions & Answers

You have a bad control panel which incorporates the keypas assembly around 300 retail

YEPper

There are several specialized appliance sites that can provide diagrams, parts and specialized help. Here is a link for your model: http://www.partselect.com/Models/JES8850BCS/

The buttons could be locked in cleaning mode. Cleaning mode lets you wipe the screen with a rag without pressing the buttons. There is a way to get it into and out of cleaning mode, probably a button with a padlock emblem near it that you hold down until you hear a beep. It is possible that there is a two button combination that you have to hold down.

replace parts only. no home fix on these. Depending on model #, the parts may no longer be available, but you can always search on ebay for one.

Kenmore 30" Drop In Model # 911.45565791. Turned on the r. front burner and it sparked at terminal block. Swapped coil with the other one and it still did not work. Did not see any broken wires. Replaced terminal block, any ideas? All other burners, etc. work fine.

they are tight but they just pull off

use a blow drier to dry the igniter and knobs.

Faulty switch.

Try turning off the power at the switch again and leave it off for a little while, sometimes the microprocessors become confused and need time to re adjust.