Top 20
Brookstone HDMI Pocket Projector - Page 6 Questions & Answers
How can i fix eltrade a3 machine is not off
This could be due to a variety of reasons. . I suggest you contact Eltrade's customer support team at 0887 113 311 or 02/818 90 40 for assistance 1. They are available 24 hours a day, 7 days a week to help you with any issues you may be experiencing
What does error 2 means?
You need to post again offering the brand and model of the machine. I can only guess it refers to a printer but error message mean different things across brands.
What is error code 08 on my tga mystere
This error code comes up when the throttle isn't reacting as it should to the rider. For this troubleshooting you'll need a #3 Allen wrench.
Troubleshooting Steps:
1.Use the Allen wrench to loosen the LCD display and flip it over the handlebar so the backside is facing up.
2. Unplug the connection to the LCD.
3.. Remove the back panel of the LCD.
4. Check the throttle magnet (make sure it hasn't moved out of position) and hall sensor for damage or disconnection. The hall sensor will have 3 links on it, all 3 must be in tact.
5. Check the throttle spring to ensure its seated correctly and functioning as it should. The trigger should immediately spring back to its original position if functioning properly.
Resolution: After steps 1-5, you should be ready to ride, but if an error code still persists, you will need to replace the LCD/Throttle assembly entirely.
Tech solutions shredder. runs backwards, not forward.
Possibility
There could be a sensor in the paper path, which is blocked by jammed paper, insert thin cardboard like a note card.01 to . 03 inches, with light steady pressure while trying to operate in forward mode
Unit could be at its Max run time/ overheating read manual
Paper load could be too thick
How do I fix F2 error code on a alpicool cr65 fridge
- Power off the fridge: Start by turning off the power to the Alpicool CR65 fridge. Unplug it from the power source or disconnect it from the power supply if it's wired directly.
- Wait a few minutes: Give the fridge time to reset. Waiting for a few minutes can help clear any temporary issues or glitches.
- Check the temperature setting: Ensure that the temperature setting on the fridge is appropriate for your needs. It's possible that the temperature was set too high or too low, triggering the error code. Adjust the setting within the recommended range.
- Inspect the temperature sensor: The F2 error code indicates a problem with the temperature sensor. Check if the sensor is clean and properly connected. Look for any damage or lose connections. If you find any issues, try to fix them or replace the sensor if necessary.
- Reset the fridge: Some Alpicool CR65 fridges have a reset button. Locate the reset button (usually at the back or bottom of the unit) and press it. This action can reset the fridge's internal electronics and clear the error code.
- Contact customer support: If the above steps do not resolve the issue, it's advisable to contact Alpicool customer support or refer to the user manual for further assistance. They will be able to provide you with specific guidance or arrange repairs if needed.
- Note:Opening and repairing the fridge yourself may void any warranty, so it's best to consult the manufacturer or an authorized service center if the problem persists or seems beyond your capabilities.
My laminator doesn't roll
Google
make model replacement motor.
Check the connections first for power.
FULL make and model in all questions please.
Error code 03130031-2F2A
All questions need FULL 'make model (what is is)' or we just guess!
Canon imagePROGRAF iPF Error Code 03130031-2F2A
ProPrinting Systems
https://proprintingsystems.com > canon-imageprograf-...
Hardware error 03130031-2F2A means your imagePROGRAF cannot detect the LF home position. It also displays a message 'directing you to restart the printer.
Canon IPF 750 error code 03130031-2F2A
Copytechnet
https://www.copytechnet.com > ... > Canon
Jan 31, 2018 - 2F2A is a Linefeed Error, maybe the Lubricant on the polished Metal Bar becomes sticky, causing the Carrier run too heavy. Clean thoroughly and ...
codigo en ipf 700 -710 03130031 2F2A - Copytechnet
Sep 10, 2019
Tag: 03130031-2f2a - Search Results - Copytechnet.com
Sep 8, 2019
IPF8300 error 03130031-2F25 - Copytechnet
Sep 8, 2019
Canon IPF 710 error 03130031 2F2A - Copytechnet
Apr 30, 2019
More results from www.copytechnet.com
Canon iPF5100 - Error Code: 03130031-2F2A
PrintCopy .info
https://printcopy.info > code=03130031-2F2A
Code: 03130031-2F2A · Description: Feed roller home position error. · Causes: Feed roller encoder film, feed roller HP sensor, feed motor, or main controller PCB ...
Can IPF 750 Error# 03130031-2F2A. Sorry! Canon ...
JustAnswer
https://www.justanswer.com > printers > avaqq-ipf-75...
Dec 13, 2017 - Unplug the power cord from the wall outlet. Press and HOLD the Power Button for 60 seconds. Plug the power cord back into the wall outlet.
1 answer · Top answer: Thanks for choosing Just Answer. I'm Kumar and I'll assist you today. Do you a
I need to get a User Manual & Guide for "AccuBANKER AB1000 Bill Counter
I can provide you with some general guidance on obtaining a user manual for the AccuBANKER AB1000 Bill Counter:
- Manufacturer's Website: Visit the official website of AccuBANKER or the specific product page for the AB1000 Bill Counter. Look for a "Support" or "Downloads" section on their website. Often, manufacturers provide user manuals and guides as downloadable PDF files that you can access for free.
- Online Retailers: Check popular online retail platforms that sell the AccuBANKER AB1000 Bill Counter. Sometimes, user manuals or guides are included as downloadable files on the product listing page. Look for a "Product Information" or "Downloads" section on the retailer's website.
- Contact AccuBANKER Customer Support: If you're unable to find the user manual online, you can reach out to AccuBANKER's customer support directly. They should be able to provide you with the necessary user manual or guide for the AB1000 Bill Counter. Visit their website and look for a "Contact" or "Support" section to find their contact information.
When contacting customer support, make sure to provide them with the specific model number (AB1000) and any other relevant details to ensure that they can assist you accurately.
Keep in mind that user manuals and guides are often copyrighted materials, so it's important to obtain them from authorized sources. Avoid downloading manuals from unofficial or unknown websites, as they may not be accurate or up to date.
I hope this information helps you in obtaining the user manual for your AccuBANKER AB1000 Bill Counter.
I have an SRL- 2700 plus laminator, it stopped when laminating after a few minutes it turned off and now it won't turn on?
If your SRL-2700 Plus laminator stopped working and won't turn on, there are a few troubleshooting steps you can try:
- Check the power supply: Ensure that the laminator is properly plugged into a functioning power outlet. Try using a different outlet or connecting another device to the same outlet to verify if the power source is the issue.
- Reset the laminator: Look for a power switch or a reset button on the laminator. Turn the laminator off, unplug it from the power source, and wait for a few minutes. Then, plug it back in and try turning it on again. This can help reset any internal electronics or safety mechanisms that may have caused the laminator to shut off.
- Inspect the power cord: Check the power cord for any signs of damage, such as frayed wires or cuts. If you notice any issues, it's important to replace the power cord with a suitable replacement to ensure safe operation.
- Examine the thermal fuse: Some laminators are equipped with a thermal fuse that can trip and cause the unit to shut off if it overheats. If the laminator was being used extensively or for an extended period before it stopped working, it's possible that the thermal fuse tripped. You may need to open up the laminator (if you're comfortable doing so) and check the thermal fuse. If it's blown, it will need to be replaced by a professional or an authorized service center.
- Contact customer support or a service center: If none of the above steps resolve the issue, it's recommended to reach out to the manufacturer's customer support or an authorized service center for further assistance. They will have specific knowledge about your SRL-2700 Plus laminator and can provide guidance on troubleshooting or repair options.
Always prioritize safety when working with electrical devices. If you're unsure or uncomfortable performing any troubleshooting steps, it's best to consult a professional technician or service center for assistance.
Not finding what you are looking for?