20 Most Recent Jenn-Air JES9750 Electric Kitchen Range Questions & Answers

One or both of your oven elements are likely failing. I would replace them both. It's not hard job.

Jenn-Air JES9750... • Answered on Aug 19, 2017

I sounds like an issue with the pilot light. Our stove does the same. Sorry that's not much help

Jenn-Air JES9750... • Answered on Jul 23, 2012


Very common issue on these units and I have replaced the board to fix this issue. You will need a new erc, let me know,


Jenn-Air JES9750... • Answered on Mar 08, 2011

follow the power line ..and see if it has something is shorted ..or if it leads to a fuse...it is possible that the fuse its out ..and this stopped the power on that line .....or also check with a control lamp ..if there is current on the line ,,and until where ..this way you will see where it is interrupted ....see on the switches..in front of them and beyond..to see if there isn't any issue with it ..and like I said ..my money will go for a fuse blown..

Jenn-Air JES9750... • Answered on Aug 27, 2010


Usually, when an oven won't bake, it's because the bake element( bottom element) is burned out. The bake element is the black, pencil- thick tube at the bottom of the oven. When the oven heats, the element glows red. This element has an expected life-span of several years. It may last for only one; it may last for many more. When the element burns out, you need to replace it.

Please check whether your bottom element has probably "blown" out. See if there is a small spot that looks like it exploded. It is similar to an extension cord getting warm and melting in a spot. You need to replace it.

Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

Jenn-Air JES9750... • Answered on Aug 06, 2010

Here is the site link to get your owner's manual for free. Click on the exact model # to reference the correct manual for your range. Douglas


Jenn-Air JES9750... • Answered on Jun 26, 2010

ok you have a fun one becuase the sockets could be bad you need to check for 220volts at the plug in for the serface burners if no power there then bad switch

Jenn-Air JES9750... • Answered on Jun 03, 2010

door need to lock before it can clean so check for obstructions in latch or find out why its not locking

Jenn-Air JES9750... • Answered on Mar 27, 2010

its confused. the problem maybe in you touchpad menbrane

Jenn-Air JES9750... • Answered on Mar 27, 2010

The problem is the thermostat inside is bad.

Jenn-Air JES9750... • Answered on May 06, 2009

the range you are looking at is going to stick out too far, if you don't mind it sticking out 5 inches than ok but it will stick out, normally the stahdard is even or 2 inches out nothing more.

Jenn-Air JES9750... • Answered on Mar 27, 2009

Not finding what you are looking for?
Jenn-Air JES9750 Electric Kitchen Range Logo

Popular Tags

30 questions posted

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Paul Carew

Level 3 Expert

3538 Answers

Cindy Wells

Level 3 Expert

6259 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jenn-Air Kitchen Ranges

  • Jenn-Air Kitchen Ranges

Most Popular Question

left rear stove top electric burner not

  • Kitchen Ranges