Hoshizaki Modular Cuber 680 Lb. with 550 Lb. Bin - Answered Questions & Fixed issues
Ice machine started beeping
beeps means there is an error code. need to count the beeps as that tell the tech what the machine has found as a malfunction.
8/14/2014 3:01:08 AM •
Hoshizaki...
•
Answered
on Aug 14, 2014
•
150 views
What is the age of this unit. model- B1500SS /
this unit was registered to Sunlow, in Atlanta Ga. They are the local Hoshi people for parts and machines. The date registered when it was sold to them is 7/22/2002. Hope this helps
8/14/2014 3:00:01 AM •
Hoshizaki...
•
Answered
on Aug 14, 2014
•
765 views
E1
High temperature alert E1 code occurs if box temperature has exceeded 18DEG F above the set point for more than 2 hours. It will reset its self after temp drops
10/6/2014 4:12:13 PM •
Hoshizaki...
•
Answered
on Oct 06, 2014
•
441 views
Water pressure regulator
need model and serial numbers. I am assuming it is water cooled.(?) let me know more and we can try to fix
8/14/2014 2:29:10 AM •
Hoshizaki...
•
Answered
on Aug 14, 2014
•
59 views
Hoshikazi km 630 makes beapin sounds
beeping sound is an alarm. the number of beeps tells you what the machine has found as an issue. count the beeps and get back to me,.
8/14/2014 2:28:18 AM •
Hoshizaki...
•
Answered
on Aug 14, 2014
•
100 views
Makes small cubes
this is usually due to the reservoir loosing water or the float is not set right. during the freeze cycle, look for the machine drain and see if any water is draining. start there and let me know if I can help any further.
8/14/2014 2:08:23 AM •
Hoshizaki...
•
Answered
on Aug 14, 2014
•
76 views
Kml 250mah
some over flowing is ok as long as it does not go into the ice bin. if it is, the drain in the res is restricted some how, or the pump is not pumping the water out. start with that and let me know
8/14/2014 1:57:10 AM •
Hoshizaki...
•
Answered
on Aug 14, 2014
•
81 views
Hoshizaki KM-630MAB
Check your refrigerant pressures during harvest. The board is picking up a fault. You could have a thermister problem on the suction line.
7/26/2014 2:33:22 AM •
Hoshizaki...
•
Answered
on Jul 26, 2014
•
121 views
Not finding what you are looking for?