20 Most Recent Hoshizaki Modular Cuber 680 Lb. with 550 Lb. Bin Questions & Answers


go to http://www.hoshizakiamerica.com/. Click on "support". enter the model number of your unit and then click "get manual". there should be cleaning procedures in one of the 3 manuals that are available.

Hoshizaki... | Answered on Aug 14, 2014


beeps means there is an error code. need to count the beeps as that tell the tech what the machine has found as a malfunction.

Hoshizaki... | Answered on Aug 14, 2014


this unit was registered to Sunlow, in Atlanta Ga. They are the local Hoshi people for parts and machines. The date registered when it was sold to them is 7/22/2002. Hope this helps

Hoshizaki... | Answered on Aug 14, 2014


according to the Hoshi web site, these numbers are not valid. Double check them and get back to me.

Hoshizaki... | Answered on Aug 14, 2014


start at looking for a stuck float switch. this keeps it in defrost till it senses water level full enough to make ice.

Hoshizaki... | Answered on Jul 11, 2010


it often takes a full 24 hours for an ice machine to get back up and running and make its first batch of ice.

Hoshizaki... | Answered on Aug 14, 2009


High temperature alert E1 code occurs if box temperature has exceeded 18DEG F above the set point for more than 2 hours. It will reset its self after temp drops

Hoshizaki... | Answered on Oct 06, 2014


need model and serial numbers. I am assuming it is water cooled.(?) let me know more and we can try to fix

Hoshizaki... | Answered on Aug 14, 2014


beeping sound is an alarm. the number of beeps tells you what the machine has found as an issue. count the beeps and get back to me,.

Hoshizaki... | Answered on Aug 14, 2014


this is usually due to the reservoir loosing water or the float is not set right. during the freeze cycle, look for the machine drain and see if any water is draining. start there and let me know if I can help any further.

Hoshizaki... | Answered on Aug 14, 2014


need more details. also, model and serial would help a lot.

Hoshizaki... | Answered on Aug 14, 2014


need model and serial number. most hoshi ice makers are set up to run by getting power thru the bin thermostat. it may be bad. need model and serial as that would help a lot.

Hoshizaki... | Answered on Aug 14, 2014


what specifically is your question? more detail and a model and serial would help.

Hoshizaki... | Answered on Aug 14, 2014


need more detail. model and serial woudl also help.

Hoshizaki... | Answered on Aug 14, 2014


some over flowing is ok as long as it does not go into the ice bin. if it is, the drain in the res is restricted some how, or the pump is not pumping the water out. start with that and let me know

Hoshizaki... | Answered on Aug 14, 2014

Not finding what you are looking for?
Hoshizaki Modular Cuber 680 Lb. with 550 Lb. Bin Logo

Popular Tags

7 questions posted

Ask a Question

Usually answered in minutes!

Top Hoshizaki Kitchen Appliances - Others Experts

Dennis Boxerman

Level 3 Expert

1305 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Are you a Hoshizaki Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hoshizaki Kitchen Appliances - Others

  • Hoshizaki Kitchen Appliances - Others

Most Popular Question

clean hoshizaki am 150baf

  • Kitchen Appliances - Others
Loading...