20 Most Recent Jenn-Air JGW8130A Electric Single Oven Questions & Answers


put dynamite in container. if it blows up, too bad

Jenn-Air... | Answered on Oct 07, 2018


THE ONLY SOLUTION FOR THE BAD DISPLAY IS TO REPLACE THE CLOCK. I HAVE A JENN AIR OVEN TODAY AS A WORK ORDER TO REPLACE THE CLOCK FOR A FAILED DISPLAY.

FOR THE JGW8130DDB WITH NO POWER ANYWHERE, IT SOUNDS LIKE YOU HAVE A SUPPLY PROBLEM. MAKE SURE THE WIRING IS HOOKED UP WITH THE RED AND WHITE WIRES RECEIVING 240 VOLTS AND THE WHITE WIRE ATTACHED TO NEUTRAL / GROUND.IF THE OVEN HAS A BARE COPPER WIRE AND THE HOUSEHOLD WIRING ONLY HAS THREE WIRES, COMBINE THE WHITE WIRE AND THE COPPER WIRE TOGETHER AND ATTACH TO THE HOUSEHOLD NEUTRAL / GROUND .
UNLESS YOU ARE SURE ABOUT THE HOOKUP IN THE BREAKER/FUSE BOX, DO NOT GO SIMPLY BY THE COLOR OF THE WIRES.

Jenn-Air... | Answered on Nov 11, 2013


F9 Door lock safety circuit on the power relay board sensed Recommended to replace power relay board

Jenn-Air... | Answered on Oct 02, 2012


The part is AG200. Don't know where to find it.

Jenn-Air... | Answered on Jul 10, 2011


F1 on this unit means that the door latch and or the controller has failed.... you sometimes can turn the breaker off to unit and turn back on and it willl reset... most likely though it will require replaceing the control board... these units get so hot on self clean and as a servicer it is what keeps us busy.... f1 can mean three things a bad door latch mechanism, bad control board or the ribbon cable on the touch pad itself has failed and requires replacement of the touch pad... most of the time it ends up being the control itself and some of these models when you order the control it comes with a new door latch mechanism... turn power off and try that first if no cure then order parts from appliance repair or a reputable online store like
www.sears.com then hit the parts direct link up top of page and enter your model number
www.apdepot.com
www.repairclinic.com wish all the luck to you....

Jenn-Air... | Answered on Feb 13, 2011




Hi,


If your electric oven is taking too long to heat or just not heating up right, then check out this tip that will give more detail about your problem.

Oven Problems Electric Oven is Heating Slowly or Poorly

heatman101


Jenn-Air... | Answered on Jan 20, 2011


normally pressing the clear/off button for three to five seconds will cancel the cleaning cycle

Jenn-Air... | Answered on Jan 19, 2011


We are getting rid of this oven - I killed it. I have the manual for it. If you want it, please let me know - it does give instructions on how to remove the door. Please contact me via my contact page through my website at www.compassionatechild.com - if you want the manual.

Jenn-Air... | Answered on Nov 28, 2010


Hello,

IF you can locate the model number tag (bottom left of door opening) you can look up the manual at www.geappliances.com

The only button on your stove that should make the door lock would be the clean button (self clean model) if that is pressed simply hit the clear/off or cancel key and wait for the door to unlock.

IF the self clean option ran for an hour or so, you will have to wait for the oven to cool down before the lock can unlock (safety feature)


Thank you and thanks for using fixya

Jenn-Air... | Answered on Sep 29, 2010


Someone else had this problem, and it turned out to be the high limit switch (a relay) that had burned out. Here is what they said, quoted from kitchen.manualsonline.com:

Our oven was doing the same thingwe tried flipping the breaker but it didn't help. After that we unbolted the whole unit from the cupboards, pulled it out and removed the panels. the problem is a relay switch on the back of the oven which keeps it from overheating, this was burnt out. We got the part from a local appliance repair place for $14.00 and replaced it ourselves.

I have to run an errand now, but will try to get back with a diagram and parts list for your oven.
For now, hope this helps.

Jenn-Air... | Answered on Aug 25, 2010


Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.

Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Jenn-Air... | Answered on Aug 17, 2010


Hello there:
if this is the newer style oven then follow the gujide i have provided below and if it is a older style follow the guide i have provided below the first one ok

newer style
F1 Power to element relay energized during time of day display Wiring harness shorted or change power relay board (PRB)

Note: for double ovens, change second oven board

older style
F1 Defective touch pad or membrane Replace touch pad or membrane (this problem is usually the touch pad)


Jenn-Air... | Answered on Jul 25, 2010


Turn off the house breaker to the machine for about 15 minuts and turn it back on and see if it releses the door. or unplug the machine for the same amount of time.

If this does not work then your Oven latch may be bad. I looked up your latch and it is a motor drive latch.

One more thing that could be bad is the TOC or sometimes call the High limit thermo fuse.

Jenn-Air... | Answered on Jan 07, 2010


HI There
I have this code for you to read and this is helpful. Let me know how it goes.
F1 Defective touch pad or clock (ERC) Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information.Thank you for writing to fix ya.
Best Regards Richard

Jenn-Air... | Answered on Jan 07, 2010

Not finding what you are looking for?
Jenn-Air JGW8130A Electric Single Oven Logo

50 questions posted

Ask a Question

Usually answered in minutes!

Top Jenn-Air Ovens Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Nathan Van Boven
Nathan Van Boven

Level 2 Expert

206 Answers

Are you a Jenn-Air Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jenn-Air Ovens

  • Jenn-Air Ovens

Most Popular Question

timer starts beeping flashes f1

  • Ovens
Loading...