Microsoft Standard Wireless Optical Mouse - Answered Questions & Fixed issues

First thing is to insert a new battery. Then follow these instructions: How to Connect Microsoft Wireless Optical Mouse to Receiver 3 0 Techwalla... https://support.microsoft.com/en-ca/help/321122/troubleshoot-a-wireless-mouse-that-does-not-function-correctly https://support.microsoft.com/en-us/help/838398/troubleshoot-response-failures-in-wireless-keyboard-or-mouse

No driver required!

If 7 has the driver it will recognize it instantly ... if not go to iobit.com and download the driver booster program for free and use it to get the new driver for 7 that you need

Unless you have an old system, (win 98 ?) the mouse SW should load automatically. Just plug in the bluetooth dongle. Fresh battery in the mouse and turn it on. should detect and load. If not, it may be the really cheap mouse is garbage and not worth the 10 bucks you paid for it. If you REALLY need to download the latest driver, visit the mouse manufacturers web site and locate the driver there.

Physically it is possible if you had a replacement switch and you/or a technician could install it.
Contact a computer store and ask them if they would repair it for you. Another option is to claim warranty support.
It is rather difficult to repair it ones self as the correct switch or PCBoard needs to be acquired and connected together.

You may need to purchase another mouse.

Take care!
damnor01

Hello there, I am the Expert that will be helping you today. My name is damnor01.

Welcome to Fixya.

The mouse uses two AA 1.5Volt batteries, ensure that they are installed in the correct orientation. Positive and negative polarity, on each. New strong batteries are required for this application.
A red light shoud elumanate from the bottom of the mouse when batteries are installed.

Now connect the USB cable from the receiver to the USB port on your computer, you may need to try different ones.
Once this stage has been completed you can install the drivers for your Microsoft mouse, they can be found on the CD disk that came with your Mouse.
The drivers may need to be installed using a wired mouse.

Beneath the mouse there is a button, press it.
On the receiver there is a button press it.

The receiver will now find the mouse and connect.

Thanking you kindly
damnor01

you might have to uninstall the mouse then restart your computer then reinstall the mouse and its drivers make sure the lead from the mouse has a secure seating and the lead is not bad/faulty ((if applicable)) make sure the battery is good (has full charge)also you might test the usb device for the mouse is inserted correctly into the usb port (if applicable) click start control panel mouse you should see 4 tabs buttons,pointers,pointer options and hardware make sure you have the correct mouse selected also under hardware you can troubleshoot also you can select properties under driver you will have options to update driver,rollback driver or uninstall and under hardware you can troubleshoot in xp Click start control panel keyboard you can change your settings there or you might have uninstall the keyboard then reinstall it and its drivers then restart your computer control panel keyboard hardware then properties you hould see driver details,update driver,roll back driver,uninstall make sure you have the driver for the keyboard before uninstalling the driver diconnect the keyboard then reconnect it then reinstall the driver make sure the lead has a secure seating if applicable or the usb device hope this helps hope this helps

During the boot process tap the f8 button three times this will boot into safe mode where the only things working will be your mouse and keyboard enabling you to attempt to repair your computer make sure the leads are securely seated and are not bad/faulty hope this helps make sure you have the correct keyboard and mouse selected you might have to uninstall your keyboard and mouse then restart your computer and reinstall them make sure that you have there drivers backed up on a disk before uninstalling them click start control panel,keyboard select hardware you will see which keyboard it is this will also apply to your mouse also select properties,general you will have options to troubleshoot,driver roll back uninstall ,update driver or click start control panel administrive tools computer managent device manager scroll to keyboard you could see a yellow question mark? right click to install drivers

Connect the USB to the port of your PC. Now the PC must detect the new device and install the device to your PC unless the OS is of older version. Now the mouse which has the battery inserted will be detected on the PC.
If this wont work you must download the drivers and install them from the microsoft website .. optical mouse drivers link for your OS.

After you replace the batteries on a wireless mouse you must then sync it to its base. To do this, you must first push the button on the top of the base. The light will then start to blink. Then, you must push the button labeled "connect" on the bottom of the mouse.

Hello
Here is the link of drivers for Microsoft wireless mouse for xp
http://www.microsoft.com/uk/hardware/download/DownloadResult.aspx?category=MK&type=Mouse&name=m_swom&os=XP_32&lang=en
if you have other OS go here to choose your OS and product
http://www.microsoft.com/uk/hardware/download/download.aspx?category=MK
Hope it helps, if so do rate the solution Good Luck

control panel mouse you should see 4 tabs buttons,pointers,pointer options and hardware under hardware you can troubleshoot or select properties under driver you can update driver,rollback driver or uninstall and under hardware you can troubleshoot in xp hope this helps

check sensor

visit this site for a solution social.technet.microsoft.com.

more detail on this as I don't know if it is current laser or if u are using past ball under mouse...if laser it may be the optical sensor may have a glitch...try using another mouse to see if that works...if it does then the problem is that mouse...because I can get any mouse I want and hook it up to my laptop and it works good...try it and see. Get a logi tech wireless mouse.

there is a switch on the bottom of mine, maybe you have one too

Right click opens a context menu. That can be stopped by Group Policies from a work computer or any business computer. I cant remember how to resolve the issue, but look up explorer context menu registry keys and a solution should be out there. Explore is basically windows!

Thanks

Http://simontodd.com

dear sir
good day
Snap-in Mini Transceiver for Portability Simply snap in the transceiver to turn off the mouse, saving battery life. and for far info refare to the web page
http://uk.insight.com/p/MSJA061AC/microsoft-explorer-mini-mouse.html

thank you

If you put in a different mouse do you get the same behaviour? If not I would take it back to the store and ask for a Warranty exchange.

Turn the computer off.
Remove the wireless receiver from the USB port on your computer.
Turn the computer on.