20 Most Recent Dynex DX-E401 Router - Page 7 Questions & Answers

download software , from the mouse manufacture site

Is this your sound card?, If YES Download driver HERE Go to link below, chose SUPPORT/DOWNLOAD tab http://www.dynexproducts.com/products/computer-accessories/DX-SC5.1.html This is a discontinued product, therefore driver may not support for win 7.

try resetting it by unplugging it's connector from the computer for a few seconds. If it does not come back on, perhaps it got wet? These can be replaced quite inexpensively.

highlight...right click...select copy. Put your mouse where you want the copied selection to be...right click..paste.

You usually can do it manually by typing in "Mouse" in the search option of your start menu. something should appear like " Change how my mouse works or along those lines.

if you say you heard a hissing sound that can be fly back cap or the eht leaking electrolytic capacitors can over heat due to lack of discharge as the are about to open or "bust" best way check for dry joints or any physical damage.

go to http://members.driverguide.com/index.php?action=wizard_step_1God bless you

Hi there are two different ways in connecting a mouse on your computer, you can connect it to a usb port or PS/2 (green round port).

Linux is an open-source operating system built on the Unix system that was introduced in the 1990s. It's gradually become widely accepted as an alternative to both Windows and Macintosh because of its reliability and the open-source ethos that provides the software for free. Because the Linux operating system is constantly changing, it can quickly adapt to handle new technology, such as installing a USB webcam. Plug in your USB webcam. Boot up your Linux system and log in. Fire up a program that uses the camera, such as Skype. If the webcam is fairly recent, there is a good chance that it will work with your Linux distribution. If not, keep reading. Open a terminal window and type the command "dmesg ' more" (without the quotes). This command allows you to thumb through your boot-up messages. Check for any messages that relate to the camera. If you do see a reference, go to your "/lib/modules/usb" subfolder to see if there is a module there that exists for it. Depending on your Linux distribution, your "/usb" subfolder may be in a different location beneath "/lib/modules." You will have to recompile your kernel with support for the module, install the new kernel and then reboot the system to try to connect to the USB camera. Open a terminal window and fire up the "lusb" program. If you are running a graphical environment like Gnome or KDE, you can use the v412-tool to check for a list of USB devices attached to your system. Determine which USB device listed is your camera; there are no hard and fast rules, so guesswork prevails. In the listing for your camera is an eight-digit number with a colon in the middle. This number is the manufacturer's product ID, which you can then use to scour the Internet for a Linux driver. Hope this helps. https://help.ubuntu.com/community/Webcam

iTS POSSIBLE THAT IS BAD THE CONFIGURATION OR CHOOSE ANOTHER MODELS OF KEYBOARD OR MOUSE,REVIEW IN THE CONTROL PANEL WHAT TYPE OF MOUSE DO YOU HAVE AND ALSO THE KEYBOARD

speed is a function of line of sight distance so measure distance from wireless router for pc and then open that utililty on pc and see what relative speed is happeningif the signal is less than 3 bars, that is like a wireless tachneed at least 3 to 5 bars to get speedalso, your pc has a network adapter card no doubt might be that it's running a full tilt and needs an upgradelet me know what you find

hold shift and press 2