Samsung DVD-HR735 DVD Recorder/HDD Recorder - Answered Questions & Fixed issues

Original dvd disc,not copy or not another countries datas disc?Same country as the DVD player was bought and formatted Disc?Most likely the disc u trying to play it is in a difference formatted of recording or finalizing data codes inbeted by some patent coded program.Tries play many more other DVD discs,should work find,than the original disc,u trying to play have protected datas or difference format and not same as of ur DVD player main programming firmware.

No,u can't copy Hollywood movies,it codes protected.U can use a computer with a program that design to decodes and able copy Hollywood movies.

It looks to me to be an old machine as I see listings for that model in 2006, now there could be a few reasons firstly it may need a firmware update which will enable it to "recognise discs" made later than it (service engineer). The laser may be poor, playing is less stressful than recording or it may need a general service, their mechanisms and/or optic slides get dusty sticking to old lubricant slowing response times so the machine goes into "timeout" or just gives up, some have rubber belts which stretch. It comes down to cost of repair versus new one? you could try a lens cleaner disc (a disc with a bit of fuzz stuck on it) but I have found these have varied sucess and a service clean is better with a suitable liquid. Hope this helps.........

Highlight what you want to copy, press Enter key, go to EDIT, go to DELETE part of, Start Point, machine highlights what you want to delete, press END POINT

Check its settings. It might be the problem. Refer its user manual for details.

Check its tuner. It might need replacement.

Yes this is your problem that you no longer receive an Analogue Signal.

This unit doesn't contain a Digital Freeview Tuner so you will need to purchase some sort of External Digital Freeview Box to connect to this unit to enable you to continue recording on it.

Helle,yes this is free of charge.but we also have the service that you will be charged for and would be attended to immediately.Take care.

Does the unit show a clock display - or a standby light on the front? if not, then the PSU is likely to be the cause, with several faulty components, including electrolytic capacitors. If there is a standby LED, but it won't go further, the unit is in protection mode; again, from the (suspected) power supply.

You can opt to visually inspect the condition of the PSU (assuming the unit is out of warranty, and if so, have a look at the electrolytics - many may have bulged/leaked), or, if it still has a warranty, submit to a service centre for a quote on likely repair/parts costs, although I don't think it would be economical.

It is up to you as to how much further you wish to go with this - but keep in mind the possible expense involved along with availability of parts/boards. These days manufacturers lean toward board replacement rather than individual parts replacement/repair.

Repair is never worth it in dvd recorders. Call Samsung and see if they have a replacement flat rate for you. If not then the unit will need to be replaced, as most service centers don't know how to repair cd/dvd recorders and even when they do there will be another issue.

First of all put your tv on and dvd player.Then switch off the dvd player ,after a few minutes it will start finding its own digital channels.
Theother way is to read your manual and install it as when you first received it.
If you don`t have a manual then click here :http://www.fixya.com/ManualsDirectory/ViewPDF.aspx?itemid=20109

You need to finalize the disc for playing on other equipment. There will be an option for finalizing or closing the session in the recording menu.

use different brands o disc

It sounds like the laser in the DVD player is getting weak or has alignment problems. If the DVD that did not play in the samsung but played in others. I would tend to think its not alignment since you mentioned that it's been repaired before. Chances are the laser is weak but still within spec in order to prevent replacement. When My dvd players start to go they will generally stop recognizing burned media and thats your clue to replace it. They are very inexpensive to replace nowadays and have almost become disposable items. Probably not what you wanted to hear but it sounds like's like this player wasnt made very well.

my problem is the same like your, Samsung is very low quality in optical storage

Take a look at the online manual and look for the functions on your remote on page 43-45 and then check to see that you are the parent and not the child of a parent who set the parental controls and that you are 18 years of age or older, since persons less than 18 years of age are not permitted to use this site.

Please accept my apologies if you are a parent, and not a child as we have any number of persons who violate this rule, and we here at Fixya try to look out for such rather than defeat your interest in protecting your child.

If this solves your problem please rate.

If it does not solve your problem, leave a comment for further assistance.

Your system needs a portion of the HDD to swap and stream for the purpose of playing and recording DVDs while CDs are small enough in their data size to play without the minimal size of the space left on your HDD which should be backed up and then erased to give you that brand new feeling.

Try it and get back to me with any problems.

Thanks for asking.

Please Rate.

DVDs come in different versions.
Try using the -R DVDs. Once your DVD recorder finalizes the DVDs they should on any DVD palyer.

Check your manual to find out the finalizing method for your DVD recorder.

I hope this solution is helpful. Let me know.

What type of cable are u using to connect the TV and player.
Check those first, and reconnect if in doubt and post back
Rifaa

I have a Samsung DVD-HR735 Recorder .The Problem Is Taci Turn