20 Most Recent
Mercedes Ml Ml320 Ml350 Ml550 Ml63 Chrome Exterior Accessory Abs Molding Trim Kit Set 2006 2007 2008 2009 2010 2011 - Page 4 Questions & Answers
MERCEDES ML320
Wont turn on?? bad key or battery.Won't trun off / come out? See your dealer
Cold start missing and triangle warning light flashing on dash
Misfire causes the flashing, it means it is harming your catalytic Converters.Most likely cause is worn out spark plugs. second likely cause is never changing the oil and oil is dripping down in the cylinders after it shuts off because of sever engine wear.
Fuse Diagram
Often they will not turn the light back on until you key off and start the vehicle. It's a safety built in.If you have tried that and it is only the one brake light, I suggest looking for breakes in wires, including the trailor harness.
Fuse Diagram
Is it not in the owners manual??You can always go to your local library and find a service manual on it. Or ask your local garage to run off a few copies out of theres for you.
Disable airbags
It's a courtesy/warning light. It will come on everytime someone sets in the passenger seat beacause of sensors in the seat. There is no way to disable that feature.
I changed the battery on my 2007 ML350 and now
That could mean that your alternator is bad. If you have a volt gauge on your dash check it. It should be reading about 14.4 volts. If it is reading closer to 12 volts then your have a pooched alternator. if you are reading the right volts then pull out the manual and look up the symbol. It should tell you what it means and might get you closer to the solution.hope this helps.
Trunk lid pull down motor
you must go to some junker for to buy the motor . Search the internet and look for them. I can recommend many in area of Miami, Fl.God bless you
KEY STUCK
*** Always be gentle when wiggling the key or rocking the steering wheelWiggle the steering wheel back and forth while trying to pull out the key. Be gentle, otherwise the key could break off in the ignition. If this does not work, try the next option.Read more:
How to Remove a Key Stuck in an Auto Ignition ' eHow.com http://www.ehow.com/how_7644826_remove-key-stuck-auto-ignition.html#ixzz2HxwUux9uJack up the front of the car until the wheels just leave the ground. This takes the weight off the front wheels and gives the steering column a little more room to move. Wiggle the steering wheel and try to pull the key out. If the key remains stuck, try the next idea while the car is jacked up.Spray some Teflon dry lube into the ignition switch around the key. Just a couple of quick squirts will do the trick. Use the dental pick to actuate the pins in the ignition cylinder. This will hopefully lube the pins and lock enough so that the key can be wiggled out. If the key is still good and stuck, there are two last things to try before having to call a repair shop or locksmith. Lower the car back to the ground before moving on to the next idea.Fill a zip-type sandwich bag half full with ice. If the cubes are large, crush them to make the bag easier to handle. Wrap the ice bag around the head of the key. The idea here is to get the metal of the key to contract because of the cold, so this may take up to fifteen minutes before it is effective. Try to wiggle the key out. If the key is still stuck, it is time to add heat.Turn on a hair dryer and direct the air toward the ignition cylinder, while keeping the ice on the key itself. Heat will expand the cylinder, while the ice works on the key. Do this for fifteen minutes and try wiggling the key out.*** Always be gentle when wiggling the key or rocking the steering wheel.
Not finding what you are looking for?