Mercedes E-class E320 E500 E55 Exterior Stainless Steel Chrome Pillar Posts Trim Set 2003 2004 2005 - Answered Questions & Fixed issues

Fuel filter

If you need further help, reach me via phone at

Mercedes E-class... | Answered on Dec 31, 2014 | 70 views

Try injector cleaner if its fuel injected

Mercedes E-class... | Answered on Oct 09, 2014 | 64 views

Sometimes you have to enter the pin manually. Most blue tooth pins are 0000 but some use 1234

Mercedes E-class... | Answered on Apr 12, 2014 | 54 views

That's a problem that will need to be taken care of at a shop or dealer , that has a computer that can configure the problem out and make repairs. With all the new electronics these days its important to make sure you have some one that has the right program to trouble shoot the problem.

Mercedes E-class... | Answered on Apr 11, 2014 | 74 views

Could be a few things, when was the last time you replaced your fuel filter? Could also be a faulty fuel pump. Also there is a sensor that is located on top of the bell housing unit . you must stick your hand between the fire wall and the engine. this is nothing but a magnet that detects the #1 piston in your engine.

Mercedes E-class... | Answered on Apr 02, 2014 | 122 views

Might have a code stored in the cars computer to aid in diagnostics. I would seek a scan tool, or hire some one that has one.

Onboard sensors tecd to go bad in those models. (not cheep either)

Mercedes E-class... | Answered on Oct 24, 2013 | 59 views

Did you disconnect something or pinch the fuel line?

Mercedes E-class... | Answered on Oct 22, 2013 | 110 views

there is a pressure relief hose that comes from the fuel tank and ends near the fuel filler nozzle. there may be a loose connection there, it would cause the same error code

Mercedes E-class... | Answered on Aug 12, 2012 | 147 views

try finding it here>>

Mercedes-Benz... | Answered on Feb 27, 2019 | 264 views

Becker Code is 22325


  • Radio Codes and advice are always available here

  • Mention FixYa Forum

Mercedes-Benz... | Answered on May 14, 2016 | 103 views

These people might be able to help with that............

Mercedes-Benz... | Answered on Dec 12, 2015 | 188 views

You cannot. They are all expensive as are many other parts for that vehicle.

Mercedes-Benz... | Answered on Sep 26, 2015 | 40 views

one of these models may be the vehicle

Mercedes-Benz... | Answered on Apr 20, 2015 | 193 views

White smoke almost always indicates a blown head gasket, or cracked head. A compression test will tell you for sure.

Mercedes-Benz... | Answered on Feb 18, 2015 | 63 views

If you need further help, reach me via phone at

Mercedes-Benz... | Answered on Dec 31, 2014 | 74 views

The causes for this DTC may include: Low fuel pressure caused by a clogged filter, failing fuel pump, failed fuel pressure regulator or clogged or leaking injectors. Rough running engine due to misfiring plugs. Many engines have misfire codes to indicate the cylinder effected, such as P0304 for number 4. A large vacuum leak would cause a massive amount of un-metered air to enter the intake manifold resulting in an overly lean mixture. A large air leak at or near the number one oxygen sensor would also cause a lean mixture. A plugged converter will cause of host of driveability problems as well as set this code. A severely plugged converter will result in the inability to increase rpm when under load. Look for a code such as P0420 -- catalytic converter efficiency below threshold if the converter indicating a faulty converter. A faulty oxygen sensor. This will set a code in itself, however, a faulty oxygen sensor does not automatically condemn the sensor. The code just means that the sensor signal was not within specifications. An air leak or any of the above will cause an erroneous signal. There is a multitude of O2 codes relating to O2 performance which gives a clue to the problematic area. The Mass Airflow sensor will also cause this problem. It would be accompanied by a code such as P0100 -- Mass Airflow circuit malfunction. The Mass Airflow sensor is a hot wire that senses the volume of air entering the intake manifold. The computer uses this information to control fuel mixture. Rusty exhaust systems, cracked exhaust manifolds or damaged or missing gaskets or donuts will cause air leaks.

If you need further help, reach me via phone at

Mercedes-Benz... | Answered on Dec 31, 2014 | 267 views

Look in your glove box in the owners manual or with the papers you got when you got the car, and see if you have a card or a piece of paper that tells you what the code is. If not you will have to call your local mercedes dealer and give them your vin/serial number and they can look it up for you.

If you need further help, reach me via phone at

Mercedes-Benz... | Answered on Dec 31, 2014 | 91 views

Freez Out Plugs are located on Both Sides of the Engine Block and also on the Cylinder Head(s)

Mercedes-Benz... | Answered on Dec 06, 2014 | 112 views

Not finding what you are looking for?
Mercedes E-class E320 E500 E55 Exterior Stainless Steel Chrome Pillar Posts Trim Set 2003 2004 2005 Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Vehicle Parts & Accessories Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14839 Answers

Bill Boyd

Level 3 Expert

53812 Answers

Are you a Mercedes-Benz Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides