20 Most Recent Power Acoustik FUBAR-12W Car Subwoofer - Page 4 Questions & Answers

0helpful
1answer

HI ! I'm leonardo from

If it is burning up resistors you have a power problem. honestly if it does this i would not invest the money into it i woud get another amp by the time it is repaired it will cost almost as much as a new amp. but if you still wanna do it id look threw china manufactures like Alibaba.
3/3/2016 4:28:11 AM • Power Acoustik... • Answered on Mar 03, 2016
0helpful
1answer

How do I know if the pre amp on the back of my power acoustik 500w subwoofer is working? its old school round housing

just hook it up and try it out that will tell you.
3/3/2016 4:19:48 AM • Power Acoustik... • Answered on Mar 03, 2016
0helpful
1answer

What's this it's at the back of power acoustik subwoofer 500w low Q Driver also it has filter 50 80 120 225 on one side and the on the other it has gain min max

set gain low. the other is your filtering frequency as at what hertz you want to listen at switch threw them for your best sound.
3/3/2016 4:18:33 AM • Power Acoustik... • Answered on Mar 03, 2016
0helpful
1answer

I have a power acoustik subwoofer, how do I know if the amp at the back of the round tube works the12" speaker wrks 500w voice coil 2, 89db low Q Driver. know it's for car's but I use it with tv spk

the shown photo is a bit confusing too me , clearly this is an automotive speaker , but in the photo there is clearly a home power cord shown , is this power cord connected anywhere on this speaker ? as if it is , id be afraid that amp has received home power and not car power , as the two are not the same and have tremendous differences and would be quite damaging to this amp possibly unrepairable damage
2/24/2016 12:17:42 AM • Power Acoustik... • Answered on Feb 24, 2016
0helpful
1answer

What is this ? On the back of Power Acoustik 500w subwoofer

Sub-woofers work on a low hertz as per audio. You have a built-in amp that has a crossover that separates frequencies under 100 Hz. Typical Hertz range is between 20-60. Since you have a built-in amp the black rectangle is a heat sink which helps to dissipate heat away from the internal components and also seconds as a cover to keep debris and other foreign objects from getting to the amp and burning it out. Hope this helps.
2/20/2016 2:47:26 AM • Power Acoustik... • Answered on Feb 20, 2016
0helpful
1answer

What type of fuse should I use I have a 1000watt power acoustik

Ohm's Law says watts / volts = amps, so 1000/12 is 83+change -- damn! I hope you have a big, phat alternator! So fuses have to be rated somewhat higher than device load, you need a 90 amp or 100 amp fuse -- what style I couldn't even begin to guess, normal automotive fuses don't go that high. If this is a new install, make sure your power wires are heavy enough to handle the load. A fuse's job is to blow before the wiring catches fire. The longer the wire is, the thicker it must be. Electrical fire is a catastrophe so make sure your wiring is adequate -- I know it's hard to believe but the power wire is actually more important than the speaker wire!
6/28/2015 8:25:04 PM • Power Acoustik... • Answered on Jun 28, 2015
Not finding what you are looking for?
Power Acoustik FUBAR-12W Car Subwoofer Logo

Popular Tags

5 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Power Acoustik Car Audio & Video

  • Power Acoustik Car Audio & Video

Most Popular Question

fix frozen 12 inch power acoustik fubar

  • Car Audio & Video
Loading...