20 Most Recent Inland 3500 Consumer Headset - Page 11 Questions & Answers


https://www.cardosystems.com/support/g9x get help from above link, it is user guide and some problem and their solutions.

Radio... | Answered on May 22, 2019


https://www.test-guide.com/free-gre-practice-tests.html

See this site, and if you want to appear you can do practice for examination.

Radio... | Answered on May 22, 2019


Its better you change the speaker if you need more audio otherwise its ok, at least your hearing the sound.

Radio... | Answered on May 22, 2019


Raymarine Ray55 Manuals Down Load user manual and reset MMSI according instructions.

Radio... | Answered on May 21, 2019


You have the modulation problem. If you have hand free you connect it and try to send message, if other unit hear you then it mean your microphone has faulty and replace the microphone, the fault is in mic or other circuit from mic input to modulation device which may be any transistor , capacitor or any resistance faulty. Consult with any Radio Service Shop.

Radio... | Answered on May 21, 2019


You check your radio with other radio very near. If radio is hearing your transmission then it mean that your Radio Power Module not working if very near radio not listening you then your preamplifier and Power amplifier is not working, it mean your Radio Transmitter faulty, only Receiver is working, you consult with any Radio Service shop. One other thing if you have software also check Tx/Rx frequency it must be same for simplex operation.

Radio... | Answered on May 21, 2019


https://www.gme.net.au/media/2444484/tx3350_im_web.pdf

Download user manual from above link and read page 12 for scanning.

Radio... | Answered on May 21, 2019


heck out this site it has the alignmet procidure to set the squeltch and RF power output , Also a great easy mod for 400 yes 400 channels , enjoy http://radioaficion.com/cms/president-lincoln-ii-mod-400-channels

Radio... | Answered on May 19, 2019


With Power OFF button or remove the battery.

Radio... | Answered on May 17, 2019


Open programming of your radio, read it and see in programming help about Baud Rate, normally it is a speed of programming of your radio. If you can read/write with same rate then you no need to change it.

Radio... | Answered on May 17, 2019


You can enable the vox function, first you read your radio by using attached link. https://www.youtube.com/watch?v=YQWLlVgGT98

Radio... | Answered on May 17, 2019

Not finding what you are looking for?
Radio Communications Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Inland Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1664 Answers

Brad Brown

Level 3 Expert

18563 Answers

Tom Chichester

Level 3 Expert

61130 Answers

Are you an Inland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Inland Radio Communications

  • Inland Radio Communications

Most Popular Question

will not pair ipad 2

  • Radio Communications
Loading...