20 Most Recent
- Page 2 Questions & Answers
Silicon scientific atomic projection clock did no ...
I have one of these, and look for the manual on the 'Net every time DST changes, and eventually figure it out. Here's how: (1) Hold down the ALM/SET button until you get past the alarm setting and you see 24H or 12H. (2) Step through the settings by pushing the ALM/SET button, changing each as desired by pressing the +/CYCLE button. Eventually you'll wind up with the time zone indication flashing (it's really tiny, and appears just below the time indication). Press the +/CYCLE until you get to the desired time zone. (3) After the screen quits flashing, press the -/DST button to get the desired setting. I hope this helps, and that I can find this post again next time change!
on Jun 28, 2020
How do I change battery in a Ellen Tracy
Watch # ET5252GD
Yours is most likely a 'Clip On' type which you lever off.
Most watches use one of three methods to access the battery. 'Clip on' back cover, 'Twist Off' back plate and a 'Screw Down' back cover.
'Clip On' back covers are usually smooth ands round with no notches or holes. They are levered off using a blade style lever. Some watches even have small grooves or a small lip sticking out to lever against. Most common watches tend to use this style.
'Twist Off' covers usually have evenly spaced notches or round dimples around the edge of the cover to mount a special tool to unscrew the entire cover plate like a bolt head. Some higher priced watches use this system.
'Screw Down' cover are the easiest to spot. They are usually more square in shape and held down by four tiny screws, one in each corner. They appear most often on 'Sport' watches.
on Jun 26, 2020
Can't turn off alarm
Here are the instructions to view, change alarm time and turn off alarm:
From normal time display:
Press MODE once to display stop watch.
Press MODE again to change alarm time.
Press MODE again to change time.
From normal time display:
Press RESET once to display current alarm time.
Press and hold RESET then press START to turn on and off alarm (watch for alarm symbol on top left)
Press and hold RESET then press MODE to turn on daily alarm vs one time (watch day marker lines at the bottom)
Hope this helps.
on Jun 01, 2020
Need instructions for an Elgin FG7080 semi
DO NOT "POP" THE BACK OFF! You need a tool to unscrew the back. You may be able to find methods on YouTube to find out how to unscrew watch backs without proper tools. I'm not a watch repair professional but I do know that if you strip the threads you're gonna cause yourself more problems than solutions.
on Apr 28, 2020
Not finding what you are looking for?