20 Most Recent Toshiba Equium 3300M PC Desktop Questions & Answers

http://download.driversupport.com/lp/gppc/alt?gclid=CJiPh-q69M8CFUk6GwodBLsPqg&tid=top-oem&oemid=4183&utm_source=AdWords&utm_medium=PPC&utm_term=Toshiba%20Download&utm_content=55613236903&utm_campaign=TopOEM -V3-Global&m=Toshiba&s_kwcid=AL!4343!3!55613236903!b!!g!!toshiba%20download&ef_id=WA6HHgAAASrDH7py:20161024221142:s

can you please explain the issue?

If the laptop shuts down and won't boot up straight away, then the problem could be an overheating CPU problem. It could be a faulty fan and/or the fan and heatsink assembly is clogged with dust.
Check the fan and if it has stopped spinning then replace it and if the fan and heatsink is clogged with dust, loosen the dust and remove it.

Hi,

My name is ArmyMason, I am here to assist you. Basically you have like 6 wires that need to be plugged in and you are having a difficult time figuring out which one goes were right. Well here is a picture of a typical setup http://attachments.techguy.org/attachments/106975d1180329228/front-panel.gif I would play with that until everything seems to work correctly

http://www.escotal.com/motherboard.html

Hope that helps,
ArmyMason

are you able to start in safe mode? if you can good,then after that you look for what ever you added last and remove it.

it might be just letting you no there is no battry connected,try putting battery back and see what happens.

Hi, there are usualy good videos on you tube for everything

Removal of a drive is easy on the bottom of the laptop one or two screws hold the drive in place taking the drive screws will release the drive for desktops open the side of ur PC and some drive screws will be holding the drive in place removing them will let u remove the drive for non-screws tabs hold the drive in place pressing the tab in or out should let u remove the drive

System restore will not do what your asking.

However there is a way but you will need a Installation cd Assume you have Windows XP

Then you need to borrow or buy a Windows XP Home Edition or Pro

You can buy one used from Ebay.

There are two options !.Repair install this will save all files/data on your hard drive.

Follow these instructions to Repair install.

Boot the computer using the XP CD.

You may need to change the boot order in the system BIOS so the CD boots before the hard drive.

Check your system documentation for steps to access the BIOS and change the boot order.

When you see the "Welcome To Setup" screen, you will see the options below This portion of the Setup program prepares Microsoft Windows XP to run on your computer:

To setup Windows XP now, press ENTER.To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.Press Enter to start the Windows Setup. Do not choose "To repair a Windows XP installation using the Recovery Console, press R", (you Do Not want to load Recovery Console).

I repeat, do not choose "To repair a Windows XP installation using the Recovery Console, press R".

Accept the License Agreement and Windows will search for existing Windows installations. Select the XP installation you want to repair from the list and press R to start the repair.

If Repair is not one of the options, END setup.

After the reboot

Setup will copy the necessary files to the hard drive and reboot.

Do not press any key to boot from CD when the message appears.

Setup will continue as if it were doing a clean install, but your applications and settings will remain intact.2. If you want to do a clean install that will completely wipe your hard drive clean then follow the instructions from this site http://www.winsupersite.com/showcase/win...

You will then need to reload all Microsoft Windows Updates and find all other drivers and software from http://uk.computers.toshiba-europe.com/c...

Then wham bam you should be back in business.

hope this helps

The cable (Wire) stays attached to the Power Button Board,http://www.ebay.co.uk/itm/2270-POWER-SWITCH-BUTTON-TOSHIBA-EQUIUM-A100-/221111621689?pt=UK_Computing_Other_Computing_Networking&hash=item337b479839No, I'm wrong? The Flat Flex Cable (FFC) does come out of a ZIF connector on the Power Button Board? You may wind up buying the Power Button Board, and Flat Flex Cable, then.Or you may find a 'Mom and Pop' computer store, that can repair the cable.Regards,joecoolvette

Hi , Please follow the below steps -start menu -control panel -language -add a language -select language English -Open Button -Select the English region you want -Add Button

To fix the EL error code: * Make sure the door is completely closed and latched securely. A loose or broken latch can cause the error. *Examine the door lock for any damage, dirt, or debris that could prevent it from working properly. Clean the area thoroughly. * Turn off the washing machine, then unplug it for a few minutes. Plug it back in and restart it. This may resolve communication issues that trigger the error. * Examine the wiring connections between the door lock system and the control panel. Faulty connections, such as loose or damaged wires, can disrupt communication and lead to the error message.

Joseph was using AI Chat GPT4 to answer questions and they are deleted because they are just guesses by an AI Bot and not specifically targeted to the OP question. Disconnect from the mains. Remove the battery. Press and hold the On button for 2 full minutes, timed. This will perform a very low level power reset for your power disconnect.

Toshiba laptop not starting up

Tom's Guide Forum https://forums.tomsguide.com > threads > toshiba-lapto... Aug 10, 2015 - First do a hard reset, remove the battery and AC adapter then press and hold the power button for 20 seconds. Turn it back on and see if gets ... 1 answer · Top answer: Hi, First do a hard reset, remove the battery and AC adapter then press and hold the power button for 20 seconds. Turn it back on and see if gets ... Toshiba Laptop not boot ' Tom's Guide Forum Dec 17, 2018 my toshiba laptop isn't start. how to fix it - Tom's Guide Forum Nov 16, 2018 Satellite will not run on battery power. - Tom's Guide Forum Dec 2, 2020 Toshiba satellite Laptop won't start after restart and goes to ... Jun 27, 2017 More results from forums.tomsguide.com Here is help on your error message. https://www.google.com/search?q=STOP+CODE%3A+ACPI+BOIS+ERROR BIOS Reset https://www.google.com/search?q=Toshiba+Satellite+S55-A5275+reset+bios General Toshiba Boot issues https://www.google.com/search?q=Toshiba+Satellite+S55-A5275+will+not+boot+up ..

It isn't the codes for the remote that matter, it is the television that you want to operate. HOWEVER, this particular remote is custom made for one Toshiba device only!

Toshiba CT-90232 Factory Original Remote Control for TV's

Amazon https://www.amazon.com > Toshiba-CT-90232-Factor... Toshiba CT-90232 Factory Original Remote Control for TV's ; Compatible Devices. Television ; Connectivity Technology. Infrared ; Controller Type. Button Control. Rating: 4.9 · ‎7 reviews · ‎US$14.99

The Toshiba site I am providing a link to offers yet another link near the bottom of the page for downloading the manual to this remote. It also appears that the remote is purchasable and that even alternatives to it are provided. Here is the link: https://www.replacementremotes.com/toshiba/buy-ct-90343-ct90343-75017769-tv-tv-remote-control

Ensure the cd rom is empty and the bios is set to boot from drive C first, then drive D. If all in order and it still doesn't boot, try a system disc in the cd rom.

Hard disk security passwords are typically impossible to find or bypass without the right password.If the Toshiba memory is asking you for a password, kindly check If the laptop arrived with any manuals, they may contain the password or instructions on how to reset or retrieve it. the other option If a user's password is forgotten, several hard drive manufacturers offer master passwords that can be used to open a disk.

Try the Reset on page 100 of the manual for 5000 series Initialize Telephone Settings This function resets all Programming Mode option settings to their default setting. 1. Press 3+6+9+Hold (simultaneously). 2. Press Mode soft key. 3. Press Msg button. 4. Press Hold. 5. Press Vol 'Up' button. 6. Press Msg 7. Press Hold 8. Go off-hook, then on-hook to exit the program mode https://www.compuvoip.com/documents/ug-dp5000.pdf ..