Top 20 Toshiba Equium 2000 (PV1065E0-011FR) PC Desktop Questions & Answers

Here are the 3 manual links you can look in:http://support1.toshiba-tro.de/tedd-files2/0/userman-en-20081212112626.ziphttp://support1.toshiba-tro.de/tedd-files2/0/userman-20081212112302.ziphttp://support1.toshiba-tro.de/tedd-files2/0/userman-en-20081210102636.zip

This error is not the same as a CMOS Checksum Error, which refers to corrupted values of the CMOS settings, the ones you set through the BIOS setup program. This error means the contents of the BIOS code itself are damaged. The BIOS ROM chip on the motherboard is probably faulty. It could also be another component on the motherboard.

You should make sure that all of the BIOS settings in the system are correct, by rebooting the system, going into BIOS setup and double-checking all the values (hopefully against a recent

If you have reset the CMOS memory you need to go into the BIOS setup screen and reconfigure the BIOS. To do that you need to press a key while the computer is booting. Usually F2 but can be other keys. It should tell you on the bottom of the first screen which key to press to enter BIOS setup. If you don't know the settings the should be one for optimal defaults - use that one. You will also need to reset the time and date. Save, Exit and re-boot and everything should then work. This error is not the same as a CMOS Checksum Error, which refers to corrupted values of the CMOS settings, the ones you set through the BIOS setup program. This error means the contents of the BIOS code itself are damaged. During the boot process you will see on the screen a certain key to press to enter setup Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart You will also need to set the time and date

In the main or system setup screen you should be able to see the date and time Using your arrow keys navigate to the date and change the date. Once highlighted on the month, day, or year, press your arrow keys or your page up / page down keys to change the date. hope this helps you

It looks like the screen inverter has failed. It is repairable, but check the cost of repair against the cost of replacement to see if its viable.

It's a component on a circuit board which has died.

You've not lost your information, that is still on your PC, a separate unit.

But what I would suggest is, when you've got a screen sorted out, you back up your information. I would back up Music, Photo's, Movies and Documents you need to keep to DVD's. Then you've got the for years to come and they're not going to suffer a mechanical failure.

Shouldn't matter so long as your computer uses usb 2.0. If it is using or only capable of 1.1 then you just might want to consider a new computer. But to tell you the truth never noticed much difference between 2.0 and 1.1 on a webcam. Hope this helps

check bios settings and enable kboard usb settings is ok, save to cmos and reboot

use a PS2 keyboard/mouse
if they work fine then there is problem with your wireless equiment keyboard/mouse having some signal interfearance from some other equipment like you mobile phone etc...

When you install your operating system it will load your mouse and keyboard when you restart your computer.It will set up your hardware and install your drivers as it installs your operating system. Hope this helps--Ken

If you spill drinks on a keyboard, something is bound to break, and apparantly only the O key did... The only way to fix it is to get a new keyboard, I'm sorry. I hope this helps, Yannick.

it might be just letting you no there is no battry connected,try putting battery back and see what happens.

are you able to start in safe mode? if you can good,then after that you look for what ever you added last and remove it.

Hi, there are usualy good videos on you tube for everything

System restore will not do what your asking.

However there is a way but you will need a Installation cd Assume you have Windows XP

Then you need to borrow or buy a Windows XP Home Edition or Pro

You can buy one used from Ebay.

There are two options !.Repair install this will save all files/data on your hard drive.

Follow these instructions to Repair install.

Boot the computer using the XP CD.

You may need to change the boot order in the system BIOS so the CD boots before the hard drive.

Check your system documentation for steps to access the BIOS and change the boot order.

When you see the "Welcome To Setup" screen, you will see the options below This portion of the Setup program prepares Microsoft Windows XP to run on your computer:

To setup Windows XP now, press ENTER.To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.Press Enter to start the Windows Setup. Do not choose "To repair a Windows XP installation using the Recovery Console, press R", (you Do Not want to load Recovery Console).

I repeat, do not choose "To repair a Windows XP installation using the Recovery Console, press R".

Accept the License Agreement and Windows will search for existing Windows installations. Select the XP installation you want to repair from the list and press R to start the repair.

If Repair is not one of the options, END setup.

After the reboot

Setup will copy the necessary files to the hard drive and reboot.

Do not press any key to boot from CD when the message appears.

Setup will continue as if it were doing a clean install, but your applications and settings will remain intact.2. If you want to do a clean install that will completely wipe your hard drive clean then follow the instructions from this site http://www.winsupersite.com/showcase/win...

You will then need to reload all Microsoft Windows Updates and find all other drivers and software from http://uk.computers.toshiba-europe.com/c...

Then wham bam you should be back in business.

hope this helps

The cable (Wire) stays attached to the Power Button Board,http://www.ebay.co.uk/itm/2270-POWER-SWITCH-BUTTON-TOSHIBA-EQUIUM-A100-/221111621689?pt=UK_Computing_Other_Computing_Networking&hash=item337b479839No, I'm wrong? The Flat Flex Cable (FFC) does come out of a ZIF connector on the Power Button Board? You may wind up buying the Power Button Board, and Flat Flex Cable, then.Or you may find a 'Mom and Pop' computer store, that can repair the cable.Regards,joecoolvette

Removal of a drive is easy on the bottom of the laptop one or two screws hold the drive in place taking the drive screws will release the drive for desktops open the side of ur PC and some drive screws will be holding the drive in place removing them will let u remove the drive for non-screws tabs hold the drive in place pressing the tab in or out should let u remove the drive

To fix the EL error code: * Make sure the door is completely closed and latched securely. A loose or broken latch can cause the error. *Examine the door lock for any damage, dirt, or debris that could prevent it from working properly. Clean the area thoroughly. * Turn off the washing machine, then unplug it for a few minutes. Plug it back in and restart it. This may resolve communication issues that trigger the error. * Examine the wiring connections between the door lock system and the control panel. Faulty connections, such as loose or damaged wires, can disrupt communication and lead to the error message.

It isn't the codes for the remote that matter, it is the television that you want to operate. HOWEVER, this particular remote is custom made for one Toshiba device only!

Toshiba CT-90232 Factory Original Remote Control for TV's

Amazon https://www.amazon.com > Toshiba-CT-90232-Factor... Toshiba CT-90232 Factory Original Remote Control for TV's ; Compatible Devices. Television ; Connectivity Technology. Infrared ; Controller Type. Button Control. Rating: 4.9 · ‎7 reviews · ‎US$14.99

The Toshiba site I am providing a link to offers yet another link near the bottom of the page for downloading the manual to this remote. It also appears that the remote is purchasable and that even alternatives to it are provided. Here is the link: https://www.replacementremotes.com/toshiba/buy-ct-90343-ct90343-75017769-tv-tv-remote-control

Ensure the cd rom is empty and the bios is set to boot from drive C first, then drive D. If all in order and it still doesn't boot, try a system disc in the cd rom.

Hard disk security passwords are typically impossible to find or bypass without the right password.If the Toshiba memory is asking you for a password, kindly check If the laptop arrived with any manuals, they may contain the password or instructions on how to reset or retrieve it. the other option If a user's password is forgotten, several hard drive manufacturers offer master passwords that can be used to open a disk.

Try the Reset on page 100 of the manual for 5000 series Initialize Telephone Settings This function resets all Programming Mode option settings to their default setting. 1. Press 3+6+9+Hold (simultaneously). 2. Press Mode soft key. 3. Press Msg button. 4. Press Hold. 5. Press Vol 'Up' button. 6. Press Msg 7. Press Hold 8. Go off-hook, then on-hook to exit the program mode https://www.compuvoip.com/documents/ug-dp5000.pdf ..