Casio QT 6000 Point of Sale Terminal - Answered Questions & Fixed issues

Hi. It is a printer error. Check printers and connections. --------------------------- For those who have been asking, one of the users has the Casio QT-6000 manuals here: https://the-checkout-tech.com/manuals/cashregisters/Casio4.php

you can reset the time and attendance with in Z mode reset the table and all should be ok

You are signing on the wrong operator. Sign on the person who started the sale originally.

This should not be necessary during normal use. It is more likely that the touch panel has a fault or a scratch/ hole in it causing failure. Firstly, check that there isn't a build up of filth at the bottom of the touch panel which can interfere. 90 percent of the time it is a failing touch panel, sorry :(

http://totalpos.co.nz/wp-content/uploads/2012/10/QT6000REF_E060915D.pdf

Mode PGM 3 Clerks pick the clerk you want to use Put you new name in the the description you might need a number them ESC all the way out now Mode REG job done

would that be master/backup master down?? if it is Mode Manager number 11 reconnect yes yes yes should pop up within 3 seconds and all should be ok

Moden button, what is the Moden button?? more please

reset the tables in z

hi
i have found the users guide avalible at the link given below. The error code e105 is listed in the troubleshooting section at the end of the document. Maybe this may be of some help to you?

www.casio-europe.com/fr/downloads/manuals/ecr/qt6000.pdf

I am not personally familiar with this product, but i have located a manual that details basic and advanced programming features for your model.

Right-Click the link, and select " Save As " and save it to your desktop or other useful location.

(PDF)Casio QT-6000 Manual

mode PGM1 enter new time 24HR clock 0900 / 2100 press X Date Time button esc esc mode REG

dont do it

Mode button is very important to change the mode.If you have delete it by mistake then you have to use Casio software- cv-10, cv11 or cv33 to download all the programme and initialize qt-6000 with initialization method and reload individual programmes which you need and don't load function keys through your saved programme. Then configure the function keys manually in programm-4

1. Press [Mode]
2. Press [X/Z report]
3. Press [Daily Z]
4. Press [E-Journal]
5. Press [Reset Only]
6. Pres [Yes] to reset it.

You have to use serial communication cable If you have purchased this cable from market,it will not work.I tell you how you can make it yourself.

QT side 9pin femateConn.......Receipt Printer side 25 pin mate con
Pin 1-----------------------------------NC
Pin 2-------------------------------- 3
Pin 3-------------------------------- 4
Pin 4------------------------------- 7
Pin 5------------------------------ 8
Pin 6------------------------------ 20
Pins 7,8,9------------------- NC
After connecting with com.Port 4 initilize the QT.It should
deduct the printer. If no change the printer

If you are talking about one of the Casio QT6xxx's then you need to.

I . All peripheral devices and terminals of this cluster should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to terminal.
*In case of wire inline:
3. Connect all terminals by inline.
*In case of wireless inline: QT 6000 or QT6600 models
3. Connect Wireless LAN card.
Operation:
4. Turn on all peripheral devices of a terminal.
5. Turn on this terminal while pressing and holding the initialize switch and then release.
6. Next the screen will say push the INIT (initialize) switch to start IPL.
After releasing the key
The IPL will take a few minutes to copy over.

When it is done, Pick the Language you need. enter"20000" (U.S.)," l0000" (other area:English)," 40000"
(other area:German)," 50000" (other area: French)," 60000" (other area: Spanish) and
press the <OK> key.

I will be making a video of this procedure this week, so visit us @ www.casiohelp.com to view it.

just link the PLU in the link list program to another PLU, list, deptment etc. In P3, #3 key features, and then plus

The QT-6100 screen saver is the same as the QT-6000. Allocate the screen logo in Scanning System. Create a bitmap image that is 800x600 and send it to the QT using CV-31. Flag clear the terminal and set the option in Display Control to show the logo at clerk sign off.
www.casiohelp.com

you will need a cfcard, and a IPL turn the till off and back on with thw card in the till it will then upgrade to the new IPL