Top 20
Casio QT 6000 Point of Sale Terminal Questions & Answers
Need to calibrate screen
This should not be necessary during normal use. It is more likely that the touch panel has a fault or a scratch/ hole in it causing failure. Firstly, check that there isn't a build up of filth at the bottom of the touch panel which can interfere. 90 percent of the time it is a failing touch panel, sorry :(
How to put name into Casio qt 6000
Mode PGM 3
Clerks
pick the clerk you want to use
Put you new name in the the description
you might need a number
them ESC all the way out
now Mode REG
job done
How do I Load IPL on QT 6000?
you will need a cfcard, and a IPL turn the till off and back on with thw card in the till it will then upgrade to the new IPL
Clear memory - casio QT - 6000
Locate the battery that maintains the information on the unit. Remove the power cell, turn on the device and shut it down soon after. Restart and see if it was cleared.
Master/bm error
would that be master/backup master down??
if it is Mode Manager number 11 reconnect yes yes
yes should pop up within 3 seconds and all should be ok
QT6000 till is not powering up
The power brick is touchy with these machines. Make sure the AC cord is seated all the way in. If this is not it you may want to try to use a different power brick. usually the Epson printer power brick will run the register. try this. If no go, then I recommend service.
Error memory
you must install a software utility freeware for to clean memory. and fix it. Search in the internet and download it.God bless you
Not finding what you are looking for?