20 Most Recent Konica Minolta bizhub C450P Laser Printer - Page 3 Questions & Answers

1. Turn OFF the main power switch. 2. Turn main power switch ON while pressing the Utility/Counter key. 3. Touch [Trouble Reset]. 4. Check to make sure that [OK] is displayed and the it has been reset. 5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly. IF THIS CODE COMES BACK GET A TECH YOU HAVE A PROBLEM WITH FUSER WHICH CAN CATCH ON FIRE RUINING A PERFECTLY GOOD DAY. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If the code comes back do not reset, you are messing with the Fuser the Hot part. Continuing to reset without a technician looking at and or replacing it, the fuser can catch on fire and that would ruin a perfectly good day. 1. Turn OFF the main power switch. 2. Turn main power switch ON while pressing the Utility/Counter key. 3. Touch [Trouble Reset]. 4. Check to make sure that [OK] is displayed and the it has been reset. 5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the fuser unit. If the code comes back do not reset, you are messing with the Fuser the Hot part. Continuing to reset without a technician looking at and or replacing it, the fuser can catch on fire and that would ruin a perfectly good day. Then reset. use this procedure: 1. Turn OFF the main power switch. 2. Turn main power switch ON while pressing the Utility/Counter key. 3. Touch [Trouble Reset]. 4. Check to make sure that [OK] is displayed and the it has been reset. 5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Check your setting for scan. Try this site Self Help Product Support Konica Minolta Business Solutions Inc Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

c-3451

reset what??????????????? can not do meter count!!!! Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try this site but bet only xp Self Help Product Support Konica Minolta Business Solutions Inc Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

no such code but there is a 2151????? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

model number would help Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

the transfer belt has a cleaning system as part of the belt there is a motor in the machine that when the belt is installed runs the cleaning system which is to remove the old toner off the belt ready for the next print well the motor is burned out or the transfer belt cleaning system is messed up . Replace the belt if that does not fix it replace the motor worse case the motor is bad and it took the circuit board that controls it to Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

no such code for a C 450 P Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

you dont you replace it Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

please re check the code could not find in the service manual Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

As I said before, It is going to require you to have a special software on you computer which only a Konica Minolta tech can get if he can since the C 450 P is rare. the soft ware which is place on your computer acts as the screen allowing access to System 1, Marketing which should be change to reflect US. (MC) Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

As I said be fore, It is going to require you to have a special software on you computer which only a Konica Minolta tech can get if he can since the C 450 P is rare. the soft ware which is place on your computer acts as the screen allowing access to System 1, Marketing which should be change to reflect US. (MC) Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

It is going to require you to have a special software on you computer which only a Konica Minolta tech can get if he can since the C 450 P is rare. the soft ware which is place on your computer acts as the screen allowing access to System 1, Marketing which should be change to reflect US. (MC) Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

have the control panel replaced Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the fuser unit Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

check the fuser and replace it Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

no such code for c450P Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f