20 Most Recent Ricoh Aficio BP20N Laser Printer Questions & Answers

There is paper in it somewhere or one of the sensors is bad. If you buy a printer that is cheaper than what a technician would charge to fix this, then that printer is too cheap to drag home! Copier technician for 26 years!

you had to adjust setting between the computer & the printerthen always run the test page......if test page normal then the labels will be normally print......dear heather darling

Ricoh sense toner in the following methods:

Toner Near End
To detect the toner near-end, the machine uses:
Pixel count (memory chip on the AIO)
AIO rotation distance (memory chip on the AIO)
Toner End
To detect toner end the machine uses:
Output from the TM sensor (center)
After near-end, it is estimated that 200 pages (A4, 5% coverage) can be printed until toner
end occurs.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hi, go to Ricoh-USA.com to download the printer's driver software. Go to the Downloads section, choose Drivers, and search for your printer and operating system. Download the driver and unzip it if it is zipped, then go into the Printers section of your computer's Control Panel, click Add Printer, and follow the prompts. Windows will walk you through the installation process.

Here you go

http://ricoh-usa.com/downloads/downloads.asp?tsn=Ricoh-USA&path=http://support.ricoh.com/bb/html/dr_ut_e/rc2/model/bp20n/bp20nen.htm

I have to ask this question of you, just to make sure this is not an issue. Are you using a factory new ink cartridge?
Please consider the following:
If you are using a refilled or third party cartridge that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead.
If you are using factory new cartridges, then please call the manufacturers Technical Support for assistance with the warranty on the cartridges
Don

Try links below for Win Vista/7 x86/x64

And Rate if it works, PLEASE!

PCL Driver:
http://www.datafilehost.com/download-2a2bb3c7.html

Status Monitor:
http://www.datafilehost.com/download-c1761987.html

Remote Control:
http://www.datafilehost.com/download-6a2a8033.html

Links are functional as long as they are being used at least once in a month! Ask me if they dont work!

Bruce

I have to respond to this posting with a solution because I cannot track responses if I mark this as a "Clarification".


Are you using a factory new ink cartridge?
Please consider the following:
If you are using a refilled or third party cartridge that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead.
If you are using factory new cartridges, then please call the manufacturers Technical Support for assistance with the warranty on the cartridges
Don

What is the brand your printer
brother -change toner

I used the Gutenprint driver for the Ricoh 220. It seems to be working fine.

Print a configuration page. It will be on there. Menu, lists/prints, config page.

Ricoh Aficio 240W Plotter Error Code SC 401-00

Copytechnet https://www.copytechnet.com > forums > 108927-rico... May 4, 2016 - On old Ricoh Aficio's SC401 used to be a Transfer error, but on the 240 its ID Sensor, could be dirty, could be old Dev, could be a loose ... Ricoh MP2352 SC401- Strange problem Jul 28, 2021 Error Code SC-401 Sep 12, 2014 ricoh mp 3352 - error sc401 Dec 11, 2020 Ricoh mp 2851 SC 401 Jul 11, 2017 More results from www.copytechnet.com

Error Codes > Ricoh > MP2553 > Code SC401

Printcopy.info https://printcopy.info > code=SC401 Code: SC401 · Description: Transfer positive electrode current error A transfer roller current leak signal is detected. · Causes: • High voltage supply board set ... Missing: W2401 ‎' Show results with: W2401

Error Codes > Ricoh > Aficio 2090 > Code SC401

Printcopy.info https://printcopy.info > code=SC401 Code: SC401 · Description: Transfer roller open error · Causes: • Transfer power pack defective • Poor connection between the transfer current terminal and the ...

If your Ricoh Aficio MP C2800 is showing "toner undetectable" messages for all four toner cartridges and the yellow and cyan colors are not showing up in copies, there may be several potential causes for this issue. Here are some troubleshooting steps to help you resolve the problem:

1. Check Toner Cartridges: Ensure that all four toner cartridges are correctly installed and securely seated in their respective slots. Make sure there are no protective seals or tapes left on the cartridges.
2. Shake Toner Cartridges: Sometimes, toner inside the cartridges can settle or clump, leading to detection issues. Gently shake each toner cartridge side to side to redistribute the toner evenly.
3. Replace Toner Cartridges: If the toner cartridges are old, empty, or expired, replace them with new, genuine Ricoh toner cartridges.
4. Clean Contacts: Dust or debris on the toner cartridge contacts can interfere with communication. Use a soft, lint-free cloth to clean the electrical contacts on both the toner cartridges and inside the printer.
5. Check Developer Unit: The developer unit in the printer plays a crucial role in toner development and transfer. Ensure that the developer unit is clean and free from any obstructions.
6. Perform a Firmware Update: Check if there are any firmware updates available for your Ricoh MP C2800 printer. Updating the firmware might address known issues and improve printer performance.
7. Reset the Printer: Power off the printer, unplug it from the power source, wait for a few minutes, and then plug it back in. Power the printer on to see if the issue resolves.
8. Check Toner Detection Sensors: The printer uses sensors to detect the presence of toner cartridges. Verify that these sensors are functioning correctly and not blocked by any debris.
9. Perform a Factory Reset: As a last resort, you can try performing a factory reset on the printer. However, be aware that this will reset all settings to their defaults, and any custom configurations will be lost

Question edited tor a lot more clarity and add MAKER, but NO MODEL NUMBER! All questions need full make and model.

Ricoh Aficio 200 - Error Code: SC390

PrintCopy .info https://printcopy.info > code=SC390 Code: SC390; Description: TD sensor error 1. The TD sensor outputs less than 0.5V, 20 s after the TD sensor initial setting has been performed. Missing: cod ‎' Must include: cod

SOLVED: How fix sc390 cod of ricoh

Fixya https://www.fixya.com > ... > Ricoh The closest thing is the sc390 code, which means either the toner density sensor or the developer has gone bad, and typically replacing the PCU can fix that ...

• SOLVED: Code SC 390

  https://www.fixya.com > ... > Aficio MP6001 Copier Code SC 390 the code SC390 occurs when power on the machine. ... Service code sc 390 RICO Aficio 1015 coppier ... Sc 390 cod. what this?

Error Code sc 390

Copytechnet https://www.copytechnet.com > 56632-sc-390-a Sep 24, 2011 - I've got an Aficio 1018 that's generating sc390 after every 10 copies. I recently fitted new drum, cleaning blade and developer and changed ... Missing: cod ‎' Must include: cod

• Error code SC 390

  https://www.copytechnet.com > forums > 47571-error... Dear all Experts i often got an error code sc 390 on my ricoh aficio 270.kindly tell me what to do with this problem.

RICOH Error Code List - mtechsinfo.com

mtechsinfo.com http://www.mtechsinfo.com > files > Ricoh Erro... PDF SC-390-2. Toner density sensor error. SC-391. Developer bias problem or FU103 on Aficio 550/650 Image storage address error. Aficio 551, 551P, 700, 700P. 14 pages

Question edited for a lot more clarity and toss in some CAPS. Question moved to maker category. Printer set to wrong size paper. Computer word processing program set to wrong size. For example Letter size paper in Printer and Legal size in the Settings of what is saying to print the document. The paper is too small.

The backup battery for the Ricoh Aficio SP1100sf is located in the control panel. The service manual does not provide specific instructions on how to replace it, but it does provide general instructions on how to maintain and troubleshoot the printer.

replace the polygon mirror motor