20 Most Recent
Samsung Sch R720 Admire - Black metro Pcs Smartphone - Page 6 Questions & Answers
I forgot my screen lock pin on my samsung s9+ what can i do?
Take your time remembering it.
A hard reset is the only next solution. You hold the buttons pressed (different ones for each model) and should see the recovery screen. There you can go back to factory defaults. It means each update, self chosen app and your own files will be lost! Files sometimes have kept backups in the cloud and your apps can be reinstalled from the app store.
Samsung flip cover screen permanently white screen
If the Samsung flip cover screen is permanently white, it could indicate a hardware issue. Here are a few possible causes and solutions you can try:
- Insufficient Battery or Power Issues: Make sure that your device has enough battery power by charging it for a while. If the battery is completely drained, it may cause the screen to display a solid white color. Try using a different charging cable or power outlet to eliminate any charging issues.
- Software or Firmware Problem: If the software or firmware on your Samsung device is corrupted, it can lead to various display issues. Try performing a soft reset by removing the battery (if possible) and then reinserting it after a few seconds. If this doesn't work, you may need to perform a factory reset. Keep in mind that a factory reset erases all data on your device, so make sure to back up your data first.
- Physical Damage: If your device has been dropped or exposed to water or other liquids, it may have caused internal damage to the display. In this case, you will likely need to take it to a professional repair service or contact Samsung support for further assistance.
- Display Connector Issue: It's possible that the connection between the display and the motherboard or the flip cover is loose or damaged. If you have experience with electronics, you can try opening the device (if possible) and reattaching or replacing the display connector. However, if you're not familiar with this kind of repair, it's best to seek professional help.
If none of these solutions work, it is recommended to contact Samsung support or take your device to an authorized service center for further diagnosis and repair.
My Samsung S7 Edge does not want to switch on
Try putting it on a wall charger and leaving it for as long as you can you could have a problem with your battery or try pressing and holding the volume up down and power button all three at the same time
How do I retrieve files off a corrupted micro SD card?
Retrieving files from a corrupted micro SD card can be a difficult task, but there are a few things you can try to recover your data. Here are a few steps you can try:
- Connect the micro SD card to your computer using a card reader. If your computer does not recognize the card, try connecting it to a different computer or using a different card reader.
- Try using a data recovery software, there are several free and paid software options available, such as Recuva, Disk Drill, EaseUS Data Recovery, etc. These software are designed to scan the card and recover any files that are still present.
- If the above steps don't work, you can try using a command prompt to check the card's file system and fix any errors. To do this, connect the card to your computer and open the command prompt. Type "chkdsk [drive letter]: /f" (without the quotes) and press Enter. This will scan the card for errors and attempt to fix them.
- If none of the above steps work, you may need to send the card to a professional data recovery service. They have specialized tools and equipment that can recover data from severely damaged cards.
It's important to note that there is no guarantee that you will be able to recover all of your data, especially if the card is severely damaged. Therefore, it's always a good practice to regularly backup important files.
My Samsung Galaxy Z Fold3 will not turn on. (Yes, the battery is charged)
If your Samsung Galaxy Z Fold3 is not turning on, despite having a charged battery, there could be several possible reasons for this issue. Here are a few troubleshooting steps that you can try:
- Force restart the device: Press and hold the power button and volume down button for about 10 seconds. This should force the device to restart, and may help to resolve any software issues that are causing it to not turn on.
- Charge the device: Even if you believe the battery is charged, try charging the device for a while and see if it turns on. Sometimes the battery may not be fully charged, or there may be an issue with the charging port or cable.
- Check the display: If the inside screen is dark, try shining a bright light on it to see if you can see any faint images or icons. If the display is completely blank, there may be a hardware issue with the device that is preventing it from turning on.
- Boot into recovery mode: Press and hold the power button and volume up button to boot into recovery mode. If you can access this mode, try wiping the cache partition or performing a factory reset. However, note that this will erase all data on your device.
If none of these steps work, it may be necessary to contact Samsung support or take the device to an authorized repair center for further diagnosis and repair.
I own my Samsung Rugby SGH AM7 phone (paid for) did a reset, why does it ask to contact provider when I don't use it as a cell phone any longer? have a for an unused phone?
When you reset your Samsung Rugby SGH-A137, it's possible that the firmware may have been set to automatically connect to the original mobile network provider when the device is powered on. This is a common behavior for cellular devices, even if the device is no longer being used as a cell phone.
To bypass this, you may need to contact your original mobile network provider and request that they release the device from their network. This can typically be done by providing the device's IMEI (International Mobile Equipment Identity) number and proof of ownership.
Once the device has been released from the network, you should be able to use it without being prompted to contact the provider. If you continue to experience issues, you may also want to try manually configuring the device's network settings to use a different network, or disabling the cellular capabilities altogether if they are not needed.
Not finding what you are looking for?