Top 20 NetGear WGR614 Router Questions & Answers

You need to consult a qualified Technician.

Please check your version WGR614v1 Product Support NETGEAR

Username: admin password: password

Connect a LAN cable from the Netgear to the LAN port on your computer, open a browser and enter the Netgear configuration URL - http://192.168.0.1 The default login = admin The default PW = password You can now change the default admin password and configure the wireless settings. Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

First off you need to have a wireless connection,that being said if you have one then you will need to go to your device and let it search for your wireless router.Once that is done and you enter any password you may have on your router it should connect.I seen had issues with this because the wireless signal can be weak if so to resolve this use a POE (Power Over Ethernet) or a direct wire from your router and select a wired connection.

I would replace it, or, put it on a power strip with a switch and switch off when not in use, switch on when you come in. Take a look at these: http://www.tigerdirect.com/applications/category/category_slc.asp?Recs=10&Nav='c:373'&Sort=4

It can be connection problem or you are doing wrong setup..check all cable which is connected with router..

Go to netgear.com ,click on support and download the latest version,also go to Windows update .

Try to reboot your router...normally reboot are two types...In Netgear router, when you change the router configuration, it does a "soft reboot", which is related to the operating system reboot.And a "hard reboot" is usually done by removing power from the router and rebooting it after powering it off for several seconds.->open your browser and login your router page using username and password..->Click the Diagnostics option which is under the Maintenance on the left hand side of your Netgear setting page.->Then click the Reboot button and it will automatically reboot your router.***Reboot process can vary depending on different Netgear wireless router models.If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

Go to this Netgear WEB site.https://my.netgear.com/registration/login.aspx

yes

To RESET the Netgear, power up the Netgear then press and hold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port on your computer, open a browser and enter the Netgear configuration URL - http://192.168.0.1 The default login = admin The default PW = password You can now change the default admin password and configure the wireless settings. Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Go to windows logo in search box type cmd in black screen type ipconfig /release when completed type ipconfig /renew try again if still no go do the following reset to factory default press and hold reset button during the whole process and only release when completed. 1)press reset button 30 seconds 2)remove power cable 30 sec 3)plug in power cable 30 sec and then release. You should no be set for 192.168.1.1 username admin password is password If all fails check to see if the box is checked for wireless

That does not matter the MAC address is all you need.Please give details of your problem with this Netgear router.

Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -http://192.168.0.1The default login = adminThe default PW = passwordYou can now change the default admin password and configurethe wireless settings.Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.Apply these settings to the wireless card in your laptop/computer.To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

You can find the Wi-Fi password either at the bottom cover of your router typed at a label, or at the configuration page for the router at the section wi-fi (or wlan) - security. In order to access the configuration page of the router you need a computer already connected at the router and the Internet Explorer (or Mozilla).In any case you need further help or clarification, just post me a reply.ThanksStelios

Hi deborah bowling,May be that link will help youSecurity Authentication

Netgear is not a browser. It is a Router. For the sake of this question I would assume you were talking about the Router, what do you mean by "Lock"? You can change the default password, and no one will be able to access it. If you only want specific devices to connect to the router, you can: 1) Enable MAC Filtering 2) Disable DHCP, and assign Static IP addresses to the devices 3) Hide SSID (Not Broadcast it)

If you can't remember your password your only option is to factory reset the router and reconfigure it.

There is a button on the router, it's recessed and will need to be pushed using a paperclip or something small. Push and hold this button for 30 seconds to reset the router to factory settings.

After this you will need to reconfigure the router and set up the new security/password.

This can help you out:

http://www.columbia.edu/acis/networks/aptnet/netgear/index.html

I hope this helps! If this did help you, please give a thumbs up!

Thank you for choosing FixYa!