MSI K8MM3-V Motherboard - Answered Questions & Fixed issues

Maximum 2GB

try new video card

check your videocard.

To repair missing NTLDR or corrupted system file/s, boot up with the Windows installation CD then - Press R to repair when instructed. Press 1 or Enter to repair the C:\Windows folder. Then type chkdsk /r and then press Enter. The repair process will take quite a long time.

Try this link to download:

rapid4me.com/?q=msi+ms+7142+motherboard+drivers

Then the onboard Ethernet circuit has also been fried. Go in the BIOS and disable it then install a simple PCI LAN card (that can be bought for less than $15 at every pc shop) to get a new ethernet connection.

chak your ram its has been bad or damged

During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart or During the boot process tap the f8 button three times this will boot into safe mode where the only things working will be your mouse and keyboard enabling you to attempt to repair your computer hope this helps

check jumper setting may be overcloking or any utility for proccessor in msi site

Did you try the driver from the manufacture's website
http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=237

Here you go,

http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=237

Placa base MSI K8MM3-V (MS-7181) de VIA K8M800 int. DDR AGP8x VGA SATA RAID LAN ATX granel sc754
Ampliar Ver producto en alta resolución K8MM3 MSI-V (MS-7181) int K8M800 VIA. DDR AGP8x VGA SATA RAID LAN ATX sc754 granel.
Producto terminado. Por favor, seleccione los artículos similares en la misma categoría

Ver más productos de MSI.
Código: AA827c
Marca: MSI
N º de producto: 601-7181-020
Enlaces: El sitio del fabricante

Enviar a un amigo
Imprimir
Perro guardián
Añadir a Favoritos
Servicio de Ayuda
Refiera a un amigo



Placa base, placa base, placa madre, placa base, placa madre MSI
Le recomendamos que adquiera junto con las mercancías
Cable de datos al disco duro Ultra cable de datos al disco duro Ultra ATA/66/100/133 ATA/66/100/133 ... 32, -
HUB de alimentación de 1 x 5,25 de energía HUB de 1x 5,25 "... 42, -
Poder adaptadores de alimentación para SATA para la Reducción de disco SATA ... 34, -

Contribuir a la discusión sólo se permite a los clientes
que ya han comprado a nosotros.
Las respuestas a las preguntas más frecuentes aquí.
Descripción de la mercancía K8MM3 MSI-V (MS-7181) int K8M800 VIA. DDR AGP8x VGA SATA RAID LAN ATX granel sc754
Calidad Placa base Micro ATX formato a un precio razonable basada en el chipset K8M800 de VIA, que pueda ser equipado con lo último Athlon de 64 bits y los procesadores Sempron con socket 754a Placa base tiene dos ranuras de memoria capaz de transportar hasta 2 GB de RAM DDR tipo 400 / 333 / 266 184-pines. Por supuesto que hay dos canales con interfaz Ultra ATA 133 y dos puertos Serial ATA, un total de hasta seis dispositivos simultáneamente. S3 Graphics UniChrome integrada de gráficos con 8 a 64 MB de memoria compartida proporciona suficiente energía para aplicaciones de oficina y el hogar. Otra extensión permite una ranura AGP 8x para una tarjeta gráfica y tres PCI versión 2.3. Disco también contiene una integrada 10 / 100 Mbps tarjeta de red Ethernet, una de seis canales AC'97 tarjeta de audio, un paralelo y un puerto serie, ocho puertos USB.

Parámetros y especificaciones:

Procesador:
Socket 754 Athlon 64 / Sempron

Chipset:
De VIA K8M800
VT8237R

Memoria:
2 tomas de corriente de hasta 2 GB DDR
Apoyo a 266/333/400 MHz

Las ranuras de expansión:
1 x AGP 8x
3 x PCI

Controlador de disco:
2 x Ultra ATA 133 (máximo 4 dispositivos)
2 x Serial ATA 150 (hasta 2 dispositivos)

Tarjeta de vídeo:
S3 Graphics UniChrome 8 a 64 MB de memoria compartida

Tarjeta de sonido:
Seis canales de VIA VT1617A, 5,1
Cumple con las especificaciones AC97 v2.3

Tarjeta de red:
VíA VT6103L 10/100 PHY

Entradas y salidas:
1 x puerto paralelo
1 x Puerto serie
1 x VGA
PS 2 x / 2
1 x audio I / O (Line-in/Line-out/MIC)
4 x USB 2.0
1 x RJ-45

conectores de expansión:
4 x USB 2.0
1 x Puerto serie
1 x S / PDIF-outNapájení:
1 x 20-pines ATX
1 x 4-pin ATX 12V

Dimensiones:
244 x 215 mm Micro ATX

maybe the connection that you in insert is wrong try to connect the pink green color or the black it will ok

DRIVERS ARE NOT AVAILABLE FOR VISTA
CHECK THE FOLLOWING LINK AND SCROLL DOWN ON THE PAGE

http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=237

Two beeps means that you need to check your RAM. Try changing the RAM module and see if it working? If you have any display card (AGP/VGA/PCI or PCI express) installed then you need to check that it is properly inserted in the slot in the motherboard. Also check for any loose connections in display card.

Try reinstall drivers (if dont have download here) then find VIA AUDIO DECK in the system tray and check under the "phone jack" and under the "speaker" parameters and correct if anything wrong. Choose 6 channal and if your motherboard has self detection function of sound devices when plug it pops up and choose correct channal per jack. your logitech connectens here see how to install.

Common windows problem,you need to wipe your drive and reinstall your operating system

Hello niceguy_jes2,
click on this link for the ambulance like sound beep description:
http://www.bioscentral.com/beepcodes/awardbeep.htm

"High frequency beeps while running". "Check the CPU fan for proper operation. Check the case for proper air flow".

First item to check would be CPU's fan speed. To do this, enter your bios menu. Listed there is "H/W Monitor". Open it. Check the fan speed, CPU temperature & mother board temp. Chances are the CPU fan is turning too slow & it may need to be replaced. (No less than 2300RPM's). Average CPU fan's spin at 3000 plus).
Next item if CPU fan is ok. The thermal grease between the heat-sink & CPU may have dried up over time & cause the CPU to get too hot. You may need to remove the CPU & heat-sink assembly. Clean off all old thermal grease from the bottom of the heat-sink & from the CPU. If you do this, do not scratch either surface. Use house hold alcohol on a clean rag & wipe away all old thermal grease. Apply a tiny amount of new thermal grease. Re-assemble & check through bios H/W monitor, CPU temp. One or the other will stop the system beeps.
Link to MSI: http://global.msi.com.tw/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=237

Good luck niceguy_jes2!
Post if there are troubles.
Thank you for using fixya.
Mike

You can add ram, thats the quickest easiest and most bang for your buck and time. You need to make sure you get the appropriate type of ram and that you run your ram in what is called parallel. The best bet is pull the ram you've got off of the board. Take it to your local computer shop and get a couple of new sticks of ram. Nothing smaller than 512mb/each but some systems won't let you do more than 2GB total. Which may mean (2) 1Gig sticks of ram.
If you want to try the free route, dump all the old files you don't need/use. Uninstall old programs you don't use and run your disk defragmentation software.

have a check with the BUS cable once try replacing the BUS cable which is connected to the HARDDISK .. there may be some problem in the IDE BUS CABLE...

you can fix that by replacing with the new one ...

this problem is not where related to BIOS ..
because if there is any problem in the IDE BUS CABLE means you will face this problem ..

there is one more case it is not oftenly seen actually ..

ie if there is any problem in harddisk means you will face this problem ..

normally the harddisk will work without any problem for 10+ years ...

in very special cases the harddisk failure occurs which is called as catastrophic failure ie the harddisk makes some hissing noise before when it attempts run , this problem may be due to some manufacture defect or if the harddisk is not being used for a long period of time (may be years) ...

so just have a check with things everything will be alright ..

thank you
bye
any doubts you can reply me
i am always here to assist you
please rate my solution
have a nice day