20 Most Recent Mercury KVM800M Motherboard - Page 2 Questions & Answers

use hard drive sata or ide ?

Check your system bios to ensure that ata is your chosen hard drive for installation. if you attempt to install on the mother boards default of ahci wich is windows vista or 7 default it will not work in order to install windows xp you must choose ata. as far as weather a 64 bit install is necessary, 32 bit will work on both but 64 bit windows must be installed on a 64 bit motherboard.

Try one of these WEB sites, They detect the drivers your computer needs automatically and downloads and installs them.
Driver Detective
http://www.drivershq.com/Driver Guide
http://driverguide.comDriver Pro
http://driver-pro.com/related/english/device-driver-updates/?a=15810&gclid=CO6FoNDKtp4CFRhfagodEQhWlQ&hit=1&l=45 b>

Try one of these WEB sites, they detect the drivers your computer needs automatically and downloads and install them.
Driver Detective
http://www.drivershq.com/Driver Guide
http://driverguide.comDriver Pro
http://driver-pro.com/related/english/device-driver-updates/?a=15810&gclid=CO6FoNDKtp4CFRhfagodEQhWlQ&hit=1&l=45

plz tell me your email address
i can sent you
i have all mother booard driver

Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error hope this helps

you can get the drivers from the following link

KVM800M SATA

you can download driver on this page
http://www.mercury-pc.com/downloads_list.php?productid=515


If I could be offurther assistance, let me know. If this helps or solves the issue, please rateit and give a testimonial for my response.

Down load a manual here:

http://www.mercury-pc.com/downloads_list.php?productid=850

Try to look at the bios settings for the onboard
graphic.If its set to AGP or PCI your not getting a picture.

Good luck

You may want to check cable connection and download latest video driver for your motherboard

No,Sir it cannot be repaired .

Hello, You can download the driversfrom ASUS WEB site. http://usa.asus.com/index.aspx So please go there website For download copy bellow thelink and paste on address bar. http://support.asus.com/download/download.aspx?SLanguage=en-usSuppose, you need driver for, ASUS K8V-VM
Product =Mother Board So Series= (Socket NO.eg. 754 etc.) So Model= (Model no will be K8v-vm) And please select the O.S (XP / VISTA/ WINDOWS 7) version of the drivers that matches your P.C and search. Now you can download easilyone after one. after download all the driver ,unzip the fie with winrar or zip. Download the winrar free, copy the link and paste onaddress bar. http://www.filehippo.com/search?q=winrar Install it . Now right click on everydownloaded file and select EXTRACRT TO THE FILE FOR......,then create a newfolder with the with the driver file, you can install easily. Hope this helps. If you are helped you canrate on the 4 thumbs and leave a short comment,because, this is the free side and I can get thechance, to help people like you . Thanks for using fixya .

Dear marimuthu_te Right Here:

http://www.mercury-pc.com/download/uploaded/drivers/KVM800M_v1.6A-manual.pdf
Don't forget to vote if it helped you.

Hi,
Please go there website and download.
http://www.mercury-pc.com/product-detail.php?link=p-mainboards&subtitle=Mainboard&productid=644

Support>
Download>
Product>Mother board (suppose, mercury p4vm800mv)
OR search along with the mother model no.
Socket 775
Sorry to say you, maximum time there server, does not work properly.

Select your OS


Please select all these step by step and download......
Hope it will help you.

I hope this diagram will be helpful

If this answer helpful please vote me. Good luck.

Thanks for using FixYa

Good Morning! and wish you a Happy New Year2011. 1. Visual checkup of the Motherboard: See for any defective capacitors on the board near Processor. A defective capacitor will have a tapered surface and a good one will be flat, on the top. You need to service motherboard. Most of the motherboards carry 3-years warranty. 2. RAM problem: try to put your RAM chips in another slot if vacant. if you have two slots and both are occupied, then try starting system, by placing one RAM at a time and in each slot alternately. If any combination works then you can make out if and whether your RAM or its slot is faulty. 3. Hanging due to overheating: Before you get the message "Press F1....", pres PAUSE key several times, it should halt the process and the message will not be displayed. This will make sure that the system is halted by pressing the PAUSE Key. After one minute, release pause by pressing any other key and see if you can move further. There may be two possibilities . . . a) If you are still in the same position, where you have paused the system. The system is halted due to CPU over-heating. Clean the CPU fan with blower or a vacuum cleaner. See, if all of the locks of the CPU FAN and the heat-sink are intact. If the fan itself is not rotating, check for the fan cable and if it is OK, then try replacing CPU Fan. b) You have reached the same point where it used to stuck before, i.e. at "Press F1...". Now this means your system has halted while detecting other peripherals or add-on cards. i. HARDDISK: Most possible cause is your HARDDISK is making "click-click" sound and not getting detected. Switch off system and remove all HDD cables (Power and Data both). Start your system and see if you get any message like "insert system disk" this means there is problem with your HARDDISK. the same problem may be caused due to CDROMs. try same and try again. ii. SMPS POWER SUPPLY: This symptom may be caused due to inadequate power supply. You can change SMPS and make sure if the problem is due to power supply. iii. ADD-ON CARDS: Remove any add-on card like, Sound card, Graphics card, Modem and switch on the system. if system starts, then turn-off PC. Try placing one card at a time. and start system to make out which card is making the problem. If the problem remains, get back to us. Have a nice day!

if your computer came with a motherboard disk the sound drivers could be on it control panel sounds and audio,volume,advanced,speakers select appropriate speakers also audio you will find 3 drop down lists make the necessary adjustments there or control panel,administrive tools,computer management,device manager,sound video and game controllers could be a yellow question mark? right click to re-install drivers hope this helps

You can download them from
http://www.mercury-pc.com/product-detail.php?link=p-mainboards&subtitle=Mainboard&productid=515

remove the memory of your pc and clean the gold of the memory
check the capacitors of your mother board if not globe
press F8 in to keyboard to boot in Safe mode

if all this don't resolve your problem so reinstall your OS XP in to repair so files will stay intact

please let me know for next steps

please rate me techbelkin

You can download the drivers here:

http://www.mercury-pc.com/product-detail.php?link=p-mainboards&subtitle=Mainboard&productid=515#