20 Most Recent Roland VersaCAMM VP-540i - Page 3 Questions & Answers

The Scanner Is Not Recognized by Your System
First check your connection to the scanner and computer: Make sure your scanner's AC adapter is securely connected to the scanner and a working electrical outlet. ... Your system may not work properly if you use a USB cable other than the one that came with your scanner.

Office Equipment... | Answered on May 20, 2020

You and 11 others = 12. So the answer is twelve eightieths.

12 divided by 80 x 100 will give you the answer.

You can check the answer as 10% of 80 would be 8 students. For 10 percent you just move the decimal place one number to the left 80.0 = 8.00.

Office Equipment... | Answered on May 19, 2020

Could be a number of things to be honest, it's a case of trouble shooting really.
Plus you say it's intermittent, only during a copy/print run.

  • I would start with checking the power socket with Martindale tester and checking the earthing continuity of the machine. (poor earthing during operation can cause lots of weird faults).
  • If that checks out ok then I would re-seat the controller PCB and all the connectors and memory DIMMs and do the same with the ops panel (it could possibly be a faulty memory DIMM).
  • Then reflash all the firmware.

After that you would be looking swapping parts around / out etc.

Office Equipment... | Answered on May 19, 2020

Power Button And Cartridge Lights Flashing - This means there is a severe jam in the carriage area and it needs to be cleared before printing can resume. Power down and unplug the printer, unplug the USB cable and open the printer to reveal the print cartridges. Once the power is off, the cartridges should move freely

Office Equipment... | Answered on May 18, 2020

Thank you for the inquiry.
It would be helpful to know which printer this is, when the error occurs, and how old the printer is.
I suspect this is a HP LazerJet and possibly a firmware issue. If it's still under warrenty HP Support will walk you through the steps to upgrade the firmware.
Before contacting your dealer make sure it is not a document you are trying to print which is causing the error. The 49 error is a firmware error and most of the time it is because a document confuses the printer either with its coding or composition. Sometimes just updating the firmware on your printer will fix it. Sometimes copying the ofending file to another file and printing the new file will solve the issue. Clear out the print que so nothing is being sent to the printer. Now reactivate the network card and first try with a simple test page and work from there.
I hope we've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response.
I hope I've earned a good rating from you today.
Please post a comment if you need additional assistance so that I can help you further.
Best regards,

Office Equipment... | Answered on May 18, 2020

With respect to which office machine ............

Office Equipment... | Answered on May 18, 2020

The door switch might be broken then and is not positioned correctly or not properly being positioned while the door is closed then.

Office Equipment... | Answered on May 17, 2020

The colour purple then blue and red make the colour purple when these colours are mixed together.

Office Equipment... | Answered on May 17, 2020

Disable Power Save from the Control Panel
Type "power options" into the search box. Click "Power Options." Click "Show Additional Plans" in the "Select a Power Plan" section. Select the blue "Change Plan Settings" link next to the High Performance setting to open the plan settings editor window.


Office Equipment... | Answered on May 14, 2020

For me, dissertation writing is totally out my mind. All i know is that its a part of big sea of literature where i never wanna swim out. If you are pretending same then you can call powered essay to drag out from this problem as it has been dragging me out of the problem all the time when i was in the problem.

Office Equipment... | Answered on May 14, 2020

Yes, you can if you want to.

Scholarly articles for printing continuous forms

Double-sided printing system for continuous forms - ‎Sugisaki - Cited by 49
... and method for printing separating continuous forms ... - ‎Dash - Cited by 12
... and apparatus for producing manifold continuous forms - ‎Murray - Cited by 9

Design Your Own Business Forms: Continuous Forms

www.smartresolution.com > Business Forms
Smart Resolution helps you design and print your own continuous forms. For use with tractor feed, dot matrix or pin feed printers.

Continuous Forms Printing, NCR Forms, contiuous printing ...

business-forms.net > short-and-long-continuous-forms-for-banking-a...
Continuous Roll Forms are a cost-effective way to produce large volumes of custom forms. Custom continuous forms and snap set forms can include combinations of the following features: Up to 8 colors on 22?, 17? & 14? Forms - Printing 4/4 in a single pass equals savings for our clients.

Office Equipment... | Answered on May 13, 2020

Hello Margaret

That is a serial number not a model number.


make model manual


Office Equipment... | Answered on May 13, 2020

E 07 is a common error code in conlog prepayment meters. This error code could mean:
1, available voltage is below minimum operating voltage (160volt) of the meter.
2, there is a faulty component in the meter.

Office Equipment... | Answered on May 13, 2020

C360 error: "Replace Image Transfer Belt Unit"
The error message under that title is "Have the image transfer belt replaced soon." It's a new unit, but resists doing the Gradation Adjust. Tried returning the old belt (which was working before the replacement) and error message remains, so apparently the problem is not with the new belt.

System Error Clear (System 1 -> Initialization) gives "Result: OK" but has no effect; the problem remains after machine restart. However, it does NOT at any time give L-5 error (Transfer belt unit accumulated rotation time excess warning), just continues to say "replace image transfer belt unit", and will not allow anything else to proceed. What am I missing? (Transfer belt clutch malfunction?

Office Equipment... | Answered on May 12, 2020

Not finding what you are looking for?
Roland VersaCAMM VP-540i Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Roland Office Equipment & Supplies Experts


Level 3 Expert

13434 Answers


Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76321 Answers

Are you a Roland Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Roland Office Equipment & Supplies

  • Roland Office Equipment & Supplies

Most Popular Question

roland sp 540v trying print banner

  • Office Equipment & Supplies