20 Most Recent
Samsung LE37R72B 37 in. HD-Ready LCD Television - Page 2 Questions & Answers
Does not turn on
Now,telly power LED light indicator on the LCD telly panel blinks all the time now?Yes,than the telly power supply board is dead.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.U in a European countries right?Talk to the customer service,before u buy that refurbish power supply board.Make sure it work for European cofigeration set,like 240v power supply.
Frozen screen on the dtv
in such cases may restart disconnect and reconnect and if the problem reinside check the local antenna signal may be failing
How do i get better picture quality
It all depends on your signal source (ie. cable antenna or satellite) if available from your signal source the first choice is 1- HDMI -2 DVI -
3 Component video (RGB)- 4 Svideo - 5 composite video (yellow RCA) and finally through channel 3 in that order othewise digital tuner in.
I have a samsund LCD LE37S81B and when i turn the
If it happens when you only turn on the tv, it could be a factory setting, i suggest turning volume all the way down before shuting off unit and turning it back on. if it happens whislt watching tv, or at random, i feel you may have a problem with your audio output circuitry, Good luck.
Samsung le26a6 will not switch on
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
If blinks continue without any pause, the main board is faulty.
Not finding what you are looking for?