20 Most Recent Pioneer PDP-436RXE 42 in. HDTV-Ready Plasma Television - Page 3 Questions & Answers

me . china

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the right column of the display window. It will help you to find the document easily. https://homenol.blogspot.com/ https://elektrotricks.blogspot.com/ https://remotesearch.blogspot.com/ https://electrohelponline.blogspot.com/

Try 166, 172 or 038

Good point :>) Connecting it to a computer, may show it as a volume, but that would be all. As I said, you have an issue that no one else has ever put into Google. That means it is very, very rare. Contact Pioneer direct. It will probably have to go to a Service Centre and be connected to dealer software. No updates https://www.pioneerelectronics.com/PUSA/Support/Downloads

• Frequently Asked Questions
• Contact Us
• Find a Service Center
• Custom Install
• Factory Repair
• Software Updates

If it is 'PRICT', you are the only one to have that error in the universe! Details on resetting are in the manual. Download it, CTRL+F, type 'reset', press enter. https://www.manualslib.com/manual/130334/Pioneer-Htz170dvd.html#product-XV-DV170

Google make model remote replacement No 'control universal!

bad control board

Make sure that the blue-ray player (HDMI Out) is connected to your TV (HDMI In) with an HDMI cable. Set the TV to the input for the player. When not viewing any content, press the Home (Menu) button. Choose the Setup icon on the screen, using the left/right buttons on the remote. Press Enter. Use the Up/Down arrows to highlight Others and press the right arrow button. Use the Up/Down arrows to highlight ARC and press Enter. Use the Up/Down arrows to highlight Yes and press Enter to confirm and save the setting. See page 38 of the manual for the XV-BD717W for the information about the Others sub-menu (including ARC). Make sure that ARC is available on the TV and is enabled if needed. The manual is available here: http://docs.pioneer.eu/Manuals/BCS_313_AFN75473217_LG_manual/ . I hope this helps. Cindy Wells

Manual. Page 20 Button 5 = MUTE https://www.manualslib.com/manual/983762/Pioneer-Xv-Htd520.html?page=20&term=mute&selected=1#manual ..

Sounds like power supply issue. If you are UK based I have a complete set of Plasma Panels that are unused from my time as a Pioneer Service Department, now retired. jon@jonsnell dot co dot uk

1. Open fuse 2. Power supply failure

yes

Power supply failure

port or plug failure / damage

This is a common issue and it indicates the laser pickup is near end of life, replacement only option, not cost effective to repair.

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent.

As long as you have a HDMI port you should be able to use it. If you have only one, you won't be able to have any other player plugged in. The firestick doesn't care if the port it is plugged into is labeled 1 or 2 or 3

Pioneer is not great about updates. Here is a link to the user manual. If has been purchased in the last year it should be up to date, and i would contact people where it was purchased.https://www.pioneerelectronics.com/StaticFiles/Manuals/Home/BDP-31FD_OperatingInstructions0831.pdf

Check out Amazon or ebay your bound to find it.

first is to hear if sound is there when a DVD etc is connected to one of the rear audio and video inputs on the set.Also check speakers in the set are in menu switched ON and not OFF.If a cable box, sat box, receiver are in use check their settings for sound also==not a bad idea to unplug each unit and then after a few minutes plug each back (set , box, etc) to allow each to try to boot up.Let me know what you find.