20 Most Recent Emerson EWL20D6 Television Questions & Answers

Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Pull up older posts. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. http://electronicshelponline.blogspot.com/

Emerson EWL20D6... | Answered on Apr 23, 2017

This TV can't understand a laptop signal directly (for most laptops - there are some computers that have a TV out option). The EWL20D6 has S-video, component and composite video inputs. Your best picture will be to get a VGA (RGB) to Component Video (YPbPr) converter with a 3.5 mm to RCA L/R audio cable. See this page for some idea of the available converters: http://www.ramelectronics.net/audio-video/video-converters/vga-rgb-hv-to-component-video/c10000-c11200-c11215-p1.html . The VGA to component video cable is meant for projectors that can interpret the RGB signal, not TVs.

If your laptop has an HDMI port, you will need a different type of converter.

Once you have the correct hardware, you will need to make sure that the external video port is active on your laptop. For some machines, you may need to enable this in the BIOS first (press Esc, F1, F2 or F10 (depending on the computer) on bootup to get to the BIOS - it may take a few tries to time it correctly). Then turn off the TV and computer before connecting the cables. Then turn on the TV and set it to the desired input before turning on the laptop. Then set the laptop to send the video signal to the external monitor. (On my Win7 laptop, I right-click on the Desktop and select Graphic Properties. Then set the desired display (laptop screen, external monitor, both) and click Apply. Then press OK when you see the confirmation box on the now active screen.)

The Emerson EWL20D6 was manufactured by Funai for the Emerson line. Thus the manual is available here: http://www.funai-corp.com/support/manuals.aspx . Manuals are listed in alphabetical order. (If you use the search function, leave off the brand name.) The direct link to the manual is: http://www.funai-corp.com/6pdf/om/EWL20D6.pdf .

I hope this helps.

Cindy Wells

Emerson EWL20D6... | Answered on Mar 28, 2015

Are you sure that there is balck dot on the sreen. Check one more time is it any dust on the screen.
Black spot Means pixel of the Lcd sreen is fault. There are thousands of pixels in an lcd screen. when any of the pixel or a group of pixels become faulty the black spot will appear. Its not possile to rectify the problem other than replacing the LCD panle if its avilable. The avilability of lcd screen is very rare.

Emerson EWL20D6... | Answered on Sep 14, 2014

Check for any loose contact at its LVDS cable connection. Re-seat this cable once and check. If you wish to get some details, check the site linked here. Pull up older posts.

Emerson EWL20D6... | Answered on Dec 08, 2013

So many factors could be affecting your reception. Keep in mind that the digital signal is all or nothing, either you have a signal or you don't, with the regular signal you can pull in weak signals but you can't with digital. Your converter box when turned on will probably not pick up the standard signal. The distance from the digital signal and the direction the antenna is facing also will affect your signal.
Ok with that said you will have to clear the path between the broadcast signal and your antenna, I know this will be a chore but take your antanna out of the attic and put it outside as a test only, this dosnt mean you cant have it in the attic it will just be a signal test.
Once the antenna is moved, from the menu scan for channels and see what you get. Let me know and I can help further.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

Emerson EWL20D6... | Answered on Jan 27, 2013

Can you describe what the set is doing or not doing?

Emerson EWL20D6... | Answered on Aug 29, 2012

What does a remote have to do with the original answer....dumb asses!

Emerson EWL20D6... | Answered on Mar 10, 2012

Have you checked the power supply board for bad capacitors? they will be vented or puffed up on top, 1000uf 16v 2200uf 10v 3300uf 10v

Emerson EWL20D6... | Answered on Mar 31, 2011

We would be happy to help. We currently do not have anycodes specifically for your Emerson TV/DVD combo unit, but we would recommend performing apower scan. If there is a code that is compatible with your TV, the power scanwill find it. Power scan instructions:

Step 1:
Press and hold the TV mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once a second while pointing the remote at the TV. If the code for the TV comes up, the TV will turnoff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.

After doing the power scan please remember to put the remote back into SAT mode.Thanks so much for being a valued DISH Network customer!

Phillip Chang
DISH Network Customer Service Representative

Emerson EWL20D6... | Answered on Mar 14, 2011

Hello mash..... It is important to get the correct stand so do this. Go to your local emerson dealer and see what models are available and what they cost. Do not hesitate to take notes and or pictures of what is recommended. Then you can purchase one there or go on line in hopes of finding a better price. Joe

Thanks for choosing fixya!

Emerson EWL20D6... | Answered on Jan 04, 2011

LCD display screen is bad. Time to go Christmas shopping again. I'm sorry having to give you the bad news.

Emerson EWL20D6... | Answered on Dec 23, 2010

I had a similar problem with my Phillips 42 in. LCD HD TV.

Here's the problem. The Power Supply Board. I opened my TV up(warranty was up of course) and found several bad capacitors. Phillips and several other companies were sold capacitors that although were highly rated failed within 5 years because of a lack of preservatives. All sorts of electronic equipment is now being effected due to these defective capacitors.
1. Take it in and have it fixed
2. Open it up, check the board for faulty capacitors(bulged or leaking) Buy a new Power supply board and install it.
3. Remove PSB, remove faulty capacitors and replace with compatible new ones.

Hope this helps

Emerson EWL20D6... | Answered on Dec 09, 2010

Which audio output ports of the TV are you using? More likely you will need powered speakers system same as use in PC and use the audio line out of the TV to feed it. You cannot use just the plain speakers since the TV may not have speaker level outputs to drive the speakers directly.

Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com just make sure to use caps with low ESR, 105c rating such as PANASONIC FM or FC series.

Emerson EWL20D6... | Answered on Dec 01, 2010

Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.That the board,where the power a/c cord plug into it.Just look at the picture on the website and compare to ur actual tv power supply board.Replacing the power supply board is pretty easy,just take about 4 screws and couples connections unplugs.Just do the reverse to install.

Emerson EWL20D6... | Answered on Nov 27, 2010

el procesador de imagen ha fallado - no puede ajustar la resoluci?n de pantalla de la imagen por lo que poner una sobre otra. La placa base debe ser cambiado y que va a costar m?s que la TV vale la pena. La hora de una nueva.

Emerson EWL20D6... | Answered on Sep 07, 2010

Not finding what you are looking for?
Emerson EWL20D6 Television Logo

100 questions posted

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76455 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers


Level 3 Expert

5700 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Emerson Televison & Video

  • Emerson Televison & Video

Most Popular Question

tv screen black spot

  • Televison & Video