Top 20 Gateway MP8708 Notebook Questions & Answers

Somehow your MBR (Master Boot Record) likely got corrupted or possibly your hard drive went bad coincidentally. Simply, you will start your computer from your Windows CD/DVD install disk, then when at a DOS prompt ( D:\ ) you will then type: FDISK /MBR (press enter). Find your Operating System install DVD and start your computer with it, then follow instructions within this discussion: Restore Windows XP MBR without Windows XP disc Alternatively, review my search results for other instructions: fdisk mbr windows xp Google Search

I am not an expert but if I had your problems I would format the drive and load Windows 7 and add any drivers needed from appropriate websites. I don't trust recovery discs and have never had any luck with them, certainly not when loading onto a clean drive. If it works ok you could load XP home or pro in a partition if you really need it or alternatively try Linux. A friend has stopped Using Windows completely and has found Linux is able to meet all his needs...

Why?Gotta know. ONE tiny little mistake, and you don't have a computer anymore.Post back in a Comment.Regards,joecoolvette

Windows won't start up? Well, try this Download Tenorshare Data Recovery from its offical site and install it. Burn it into CD/DVD, or USB flash, put into the computer you need to repair, Bios setting. It can make sure your important data will not lose. Best of luck Related: windows won't start

The your mobo doesnt support the cpu.Try put the old cpu and if is good then the new one doesnt support for the mobo.

One of two things are likely your problem:

1) The battery is so dead that it's preventing any power from reaching the rest of the PC. Try pulling the battery out, plugging the laptop in, and turning it on.

If that doesn't work,

2) The motherboard power converter is burned out. If this is the case, unfortunately you will need a replacement motherboard or a replacement laptop.

Good luck, and hope this is helpful!

Gateway has a site on the topic

http://support.gateway.com/s/software/medialess/faq/suppage01su44.shtml

If your system is intact, you can create the recovery CDs, following the instructions.

If not, you need to order a new set.

There is no legal place to download recovery CDs, since they contain copies of the Microsoft OS.

Try to find your new driver here:

http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=3088

The reality is, Best Buy will only swap parts. there are other vendors on the internet that will replace discrete components. Google for "laptop power jack replacement" to find options. it takes decent skills to do this kind of repair, so research well.

I believe he's asking where to add the aftermarket modules: GABU-MP8708-0001 MODULEGACA-MP8708-0038 CABLE

Get the service manual of your laptop, if not possible try websites like: http://www.insidemylaptop.com/ they have a lot of disassembly guides.

Hi,
Take the battery out and try to boot it on AC power only, if the machine boots but can't load the operating system then the ticking sound could be and sounds like the hard drive has possibly failed.



Good luck.

Hi
the link to order mother board for your notebook

http://product.pelltechnology.com/Gateway_MP8708_Notebook_Motherboard_Replacement.asp

thanks for using fixya .....rate this solution.....

hmmm..not too good...nada on the screen? Can you boot from a cd?

give your sels full prilages in user acount cheask run spyware cleaners noadware and trendmicro and cc cleaner free junk tool

Enlarge the second photo. This may help you for wiring RS780M03G1-8EKRS2HMWD ' LX6200-01 RS780M03G1 8EKRS2HMWD Mboard (ascendtech.us) Here is AMD 780G Motherboard wiring diagram. It may also help NC81v2.pdf (jetwaycomputer.com) User Manuals GATEWAY LX6810 REFERENCE MANUAL Pdf Download ' ManualsLib Manual Gateway LX6200 Desktop Computer (manuall.co.uk)

This monitor may not have built-in speakers. It may have supported Gateway's monitor mounted sound bar. That sound bar connected to the 3.5 mm audio out on a computer and a DIN port on the monitor. The simplest solution is to connect your source to appropriate speakers. Depending on your audio setup, you could connect the video source to a receiver with HDMI IN and HDMI Out (ARC), computer speakers or an audio extractor. (If you are using an HDMI cable between the Gateway LP2417 and a computer, you may need to reset the audio output to use basic computer speakers (3.5mm jack).) VGA and DVI connections don't support audio so I assume you are using the HDMI port. I hope this helps. Cindy Wells

Re connecting the wires may work without issues.

No you don't need a driver. These are very plain powered speakers that come with a mains adapter and a lead with a 3.5mm stereo jack at both ends. Plug one in the speaker and the other into the headphone jack on the front or the speaker socket on the back which will either be a socket on the motherboard, or if your son put a sound card in the computer, it will be in a sound card. If it doesn't play straight away, go into Settings - Audio and make sure the sound card or the On-Board Audio is enabled. This shows the cable https://picclick.com/Vintage-Gateway-2000-ACS41-Altec-Lansing-Multimedia-Computer-314990339798.html#&gid=1&pid=1 More here https://www.google.com/search?q=gateway+gmax2000+speakers ..

Question edited for a lot more clarity, FULL 'make, model (what it is)'. Question moved from 'Power Computers'. Connect a computer monitor to the port on the back. When I Google the model number the first thing that shows is Replacement LCD Screens for it which leads me to believe there is an issue with them. There is three parts to the display, the video card section, the exciter module and the screen itself. It needs correct diagnosis, or buy a new one now you have reset it clean, if that is what you mean by 'hard restart'? You might mean 'hard boot', power off and back on without proper shutdown. That is bad for the OS. https://www.google.com/search?q=Model+MS2291 Keyboard shortcuts for shutdown

How to Shut Down or Sleep Windows 10/11 With a Keyboard ...

https://www.makeuseof.com > Windows 1. Use the Power User Menu Shortcut · Press U again to shut down Windows. · Hit the R key to restart. · Press S to put Windows to sleep. · Use H to hibernate. · Hit ... ‎Sleep Mode Issues · ‎Establish a hotkey · ‎Guide to hibernation on.....