20 Most Recent Fujitsu LifeBook E8110 Notebook - Page 7 Questions & Answers

which model are you using?

my best bet would be to remove the batteries, and hold the power button in to drain remaining power, once this is done restart without the battery...i know this works on hp but its worth the trysuccess

For Windows:In command prompt, type 'ipconfig /all'For Ubuntu:In the terminal, type 'ifconfig' or 'ip address'

You can switch to anexternal monitor or data projector by two methods.1. Connect the externalmonitor to the laptop's video port, power up the external monitor first and thelaptop. The video information will automatically switch to the externalmonitor.2. If you power up thelaptop first then you can switch the video output to the external monitor bypressing the Fn key and one of the Function keys, depending upon your make andmodel laptop. You can also toggle between the external monitor or both LCDscreen plus the external monitor or back to LCD screen only by pressing the Fnkey plus one of the function key. Here is a list of keycombinations for some of the laptops :-IBM ThinkPad = Fn + F7HP and Compaq = Fn + F4Toshiba = Fn + F5Dell = Fn + F8

Get onlineand got to www.google.com In the google search box type: "FujitsuSupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Download and install the Audio drivers.

You will not be able to clear the bios password.You will need to generate an MSDOS boot Floppy Disk there are a number of sites online that can show you how to do this. This disk should also have FDISK on it.Insert the disk and start the PC, it should boot up from the floppy. Now run FDISK and clear all partitions on the Hard drive. DO NOT make new partitions.Remove the floppy disk. Insert the boot CDROM and restart the PC. as there is now no boot partion on the hard drive the system should boot from the third device the CDRom.Continue to re- install the system as normal

The laptop must be dismantled to clean out the heatsink ports and cooling fan, chances are it is clogged with dirt forcing the cooling fan to work harder. The danger exist where the processor will be compromised, I recommend a professional to service the product plus he can determine if any parts need replacing.

Have you tried rapidly tapping F8 as soon as you press the power button or did you just press it once? Dont wait for it to get to the blinking cursor page.

Flash codes https://www.google.com/search?q=my+fujitsu+dc+inverter+flash+codes ..

It is always good to know the situation you are trying to troubleshoot? Broadly speaking, help and manuals in the link. https://www.google.com/search?q=amilo+v2000+troubleshooting ..

https://forum.ts.fujitsu.com/forum/viewtopic.php?f=103&t=23184