20 Most Recent
U-Line Echelon (CO2175FS01) Compact Refrigerator - Page 7 Questions & Answers
RF4287HARS/XAA freezer temp set at -8,temp inside freezer is 20
If your RF4287HARS/XAA freezer temperature is set at -8 but the temperature inside the freezer is 20, there may be a few possible causes:
- Check the door seal: Make sure that the freezer door is sealing properly. If the seal is damaged or not closing properly, warm air can enter the freezer and cause the temperature to rise.
- Check for blockages: Make sure that there are no blockages in the air vents that could be preventing cold air from circulating properly. Blocked air vents can cause the temperature inside the freezer to rise.
- Check the condenser coils: Make sure that the condenser coils on the back of the refrigerator are clean and free of dust and debris. Dirty coils can cause the compressor to work harder than normal, which can lead to temperature fluctuations.
- Check the temperature sensor: There may be an issue with the temperature sensor in the freezer. If the sensor is not working properly, it may be reading the temperature incorrectly and causing the freezer to run too warm.
If none of these solutions resolve the issue, it may be necessary to contact a professional repair technician to diagnose and fix the problem.
We're can a find a drip pan for model 201797 faberware airfryer
You can try checking with the manufacturer directly, as they may carry replacement parts for your specific model. You can also search for replacement drip pans on online marketplaces such as Amazon or eBay, or check with local appliance repair shops to see if they carry compatible parts. Additionally, you may be able to find a universal drip pan that fits your air fryer model.
Need help diagnosing a SxS FF section not cooling
If the freezer section of your side-by-side refrigerator is not cooling, here are some steps you can take to diagnose and potentially fix the problem:
- Check the thermostat: The thermostat controls the temperature in the freezer section. Check if the thermostat is set to the proper temperature and if it is functioning properly.
- Check the evaporator fan: The evaporator fan circulates air over the evaporator coils, which is necessary for cooling. If the fan is not working, it can cause the freezer to not cool. Check if the fan is running and if it is functioning properly.
- Check the condenser coils: The condenser coils release heat from the refrigerator. If the coils are dirty or blocked, it can cause the freezer to not cool. Clean the coils and check if they are functioning properly.
- Check the defrost system: If the defrost system is not working properly, it can cause frost buildup on the evaporator coils, which can prevent the freezer from cooling. Check if the defrost thermostat, heater, and timer are functioning properly.
- Check the compressor: The compressor is responsible for compressing the refrigerant in the cooling system. If the compressor is faulty or not running properly, it can cause the freezer to not cool. Check if the compressor is functioning properly and if it is getting power.
If none of these solutions work, it may be a more serious issue with the refrigerator that requires professional repair. In that case, you may need to contact the manufacturer's customer support or a qualified technician for assistance.
My defy dff417 is displaying red triangle flashing both temp readings and red triangle
The red triangle flashing on your Defy DFF417 refrigerator indicates a fault or error. Here are a few steps you can take to troubleshoot the issue:
- Check the temperature: Ensure that the temperature inside the fridge and freezer compartments are set to the correct levels. The ideal temperature range for the fridge is between 2°C and 8°C, and for the freezer, it is -18°C.
- Check the door seal: Make sure the door seals are clean and not damaged. A damaged seal can cause warm air to enter the fridge, causing the temperature to rise.
- Check the fan: If the fan is not working correctly, it can cause temperature issues. Make sure that the fan is spinning freely and is not obstructed.
- Check the condenser coils: Dirty condenser coils can also cause temperature issues. Make sure the coils are clean and not obstructed.
If none of the above steps resolve the issue, it could be a more serious problem that requires professional assistance. Contact a qualified technician to diagnose and repair the issue.
Outside door lights on/ inside off, and ice/ water dispenser not working
If your outside door lights are on and inside lights are off, and your ice/water dispenser is not working, there may be an issue with the power supply to your refrigerator. Here are some possible solutions you can try:
- Check the power outlet: Ensure that the refrigerator is properly plugged into the power outlet and that the outlet is functioning properly. Try plugging another appliance into the same outlet to see if it works.
- Check the circuit breaker: Check the circuit breaker to see if it has been tripped. Reset it if necessary.
- Check the refrigerator cord: Inspect the refrigerator cord for any signs of damage or wear. If the cord is damaged, replace it with a new one.
- Check the door switch: The door switch turns the light on and off when the door is opened and closed. If the switch is faulty, it may cause the inside light to not turn on. Check if the switch is functioning properly.
- Check the water supply: The ice/water dispenser may not be working if there is no water supply. Check if the water supply valve is turned on and if the water line is properly connected to the refrigerator.
If none of these solutions work, it may be a more serious issue with the refrigerator that requires professional repair. In that case, you may need to contact the manufacturer's customer support or a qualified technician for assistance.
How do i reset filter light on rangemaster fridge rsxs661
To reset the filter light on a Rangemaster fridge RSXS661, please follow the steps below:
- Press and hold the Filter Reset button for 3 seconds. The Filter Reset button is located on the control panel of the fridge.
- Hold the button until the light on the control panel changes from red to green.
- Release the button.
The filter light should now be reset. If you have any further questions or concerns, please refer to the user manual or contact Rangemaster customer support for assistance.
I have a Magic Chef, counter top ice maker. It suddenly is making very tiny ice. I have descaled it but it did not fix the problem
If your Magic Chef counter top ice maker is suddenly making very tiny ice despite descaling it, there could be a few other possible reasons for this issue:
- Low water pressure: Check the water source that feeds the ice maker. If the water pressure is low, it can affect the size of the ice cubes that are produced. Try increasing the water pressure to see if it improves the size of the ice.
- Faulty thermostat: The thermostat controls the temperature of the evaporator plate in the ice maker. If the thermostat is faulty, it may not be allowing the plate to get cold enough to produce larger ice cubes. You may need to replace the thermostat to fix this issue.
- Dirty or clogged condenser: A dirty or clogged condenser can also affect the size of the ice cubes. Check the condenser coils and clean them if they are dirty. This will help improve the performance of the ice maker.
- Faulty compressor: The compressor is responsible for cooling the evaporator plate. If the compressor is faulty, it may not be able to cool the plate enough to produce larger ice cubes. In this case, you may need to replace the compressor.
If none of these solutions work, you may need to contact the manufacturer or a professional appliance repair service to diagnose and fix the issue.
How do I access the coil in aGSS25LGMB WW to check it?
To access the coils on a GSS25LGMB WW refrigerator, you need to remove the back panel of the freezer section. Firstly, unplug the fridge, empty the freezer, and remove the screws securing the back panel. Gently pull the panel towards you to remove it, being careful not to damage any clips. The coils should now be visible. If you need to remove the coils for further inspection or cleaning, you may need to remove additional components such as the defrost thermostat or heater. Be cautious while working on refrigerators and follow appropriate safety procedures.
GST-40DR not cooling. Cleaned out the coils and hard rest. After a day or 2 it starts to go up in temperature of 42. Any help on repairing and what to get?
It's possible that the issue with your GST-40DR not cooling properly could be due to a number of factors, such as a low refrigerant charge, a malfunctioning compressor, or a faulty expansion valve. I would recommend having a professional HVAC technician diagnose and repair the issue, as they have the proper tools and experience to handle the job.
If you're looking to purchase parts for the repair, I would recommend providing the technician with the model and serial number of your unit so they can determine the exact parts needed. Some common parts that may need to be replaced include the compressor, the expansion valve, and the fan motor.
Keep in mind that attempting to repair a refrigeration system without the proper training and tools can be dangerous and may result in further damage to the unit or injury to yourself.
The Francis Francis X7.1 starts making noise (same as when the coffee is made) as soon as I plug the machine. Then the red triangle starts beeping really fast
The fast beeping noise and red triangle on the Francis Francis X7.1 espresso machine is usually an indicator of an error or problem with the machine. This can be caused by various factors such as a malfunction with the pump or water temperature sensor, a clogged brew head, or a problem with the pressure in the brewing system.
Here are some steps you can try to resolve the issue:
- Check the water level: Ensure that the water tank is filled and that the machine is properly connected to a water source.
- Check the grind: Make sure that the grind size is appropriate for the type of coffee you are making and that the grind is not too fine or too coarse.
- Clean the machine: Clean the brew head, portafilter, and other components of the machine to remove any coffee oils or residue that may be clogging the system.
- Check the pressure: Ensure that the machine is properly pressurized and that the pressure gauge is functioning correctly.
- Reset the machine: Unplug the machine and wait for a few minutes before plugging it back in. This will reset the machine and may resolve the issue.
If the problem persists, you may need to contact the manufacturer for further assistance or to have the machine serviced by a professional.
Recently installed a new water filter now displaying code EP not making ice
The "EP" error code on your refrigerator's display typically indicates a problem with the water pressure entering the ice maker. This can be caused by a few different issues, including:
- Clogged water filter: If the water filter is clogged, it can reduce the water pressure entering the ice maker, causing the EP error code. Try replacing the water filter with a new one.
- Restricted water supply line: If the water supply line is kinked or otherwise restricted, it can reduce the water pressure and cause the EP error code. Check the water supply line to make sure it is free of any kinks or restrictions.
- Low water pressure: If the water pressure to your home is low, it can cause the EP error code. Check with your local water provider to see if there are any known issues with low water pressure in your area.
- Ice maker valve: The water inlet valve that supplies water to the ice maker may be faulty. If the valve is not opening or closing properly, it can cause the EP error code. You may need to have the valve replaced by a professional.
If you are unable to resolve the issue on your own, it may be best to contact a professional appliance repair service for assistance.
Error code E 15 on my defy double door refrigerator ModelG10715Ne
The error code E15 on a Defy double door refrigerator model G10715Ne is typically indicative of a problem with the refrigerator's thermistor, which is responsible for measuring the temperature inside the refrigerator. The thermistor could be malfunctioning, or there could be a problem with the wiring connecting it to the control board. If the thermistor is not functioning correctly, it can result in incorrect temperature readings, causing the refrigerator to work less efficiently and possibly leading to spoiled food.
I would recommend unplugging the refrigerator for a few minutes and then plugging it back in to see if the error code clears. If it persists, it is best to have a professional technician take a look at it. A licensed repair person will be able to diagnose the issue and recommend the best course of action to fix the problem.
How to troubleshoot a frozen evap coil on a hussman rfln5 ,I have several doing the same thing at differant stores and there all only 3 yrs old
- Refrigerant charge: If the refrigerant charge is too low, the evaporator coil will not absorb heat effectively, causing the coil to freeze.
- Airflow: If airflow across the evaporator coil is restricted, the coil will freeze. This could be caused by dirty air filters, clogged condenser coils, or fan failure.
- Defrost system: If the defrost system is not functioning properly, the evaporator coil may freeze. This could be due to a faulty defrost timer, a defective defrost thermostat, or a clogged drain line.
- Compressor: If the compressor is not running properly, it may not be able to pump refrigerant through the evaporator coil, causing the coil to freeze.
To troubleshoot a frozen evaporator coil, you should start by checking the refrigerant charge and verifying that the unit has proper airflow. If the refrigerant charge is low, you should have it recharged by a licensed HVAC technician. If the airflow is restricted, clean the air filters and check the condenser coils for any blockages. If the defrost system is not working properly, replace the defrost timer or thermostat, and clean the drain line. If the compressor is not running, it may need to be replaced
Top Refrigerator not cooling and light not working
- Check the power source: Make sure the refrigerator is properly plugged in and that the outlet is working.
- Check the circuit breaker: If the circuit breaker has tripped, reset it and see if the refrigerator starts cooling again.
- Check the light bulb: If the light bulb is burned out, replace it with a new one of the same wattage.
- Check the door gasket: If the door gasket is damaged or not sealing properly, it could cause the refrigerator to stop cooling. Check the gasket for any tears, cracks, or gaps and replace it if necessary.
- Check the temperature control: Make sure the temperature control is set to the proper setting.
If none of these steps resolve the issue, it's best to call a professional appliance repair service to diagnose and fix the problem.
Regarding the beeping, if your refrigerator has an alarm system, it may be beeping because the door was left open for an extended period of time, causing the temperature inside to rise. In this case, simply close the door and the beeping should stop. However, if the beeping continues even after the door is closed, it could indicate a more serious issue and a professional appliance repair service should be called.
What temperature is a freezer supposed to be set at?
Question edited for typo.
If it has a digital display, minus 18' Centigrade, or 0' Fahrenheit. The temperature should always be verified with a thermometer inside the fridge and the freezer.
0°F
The recommended freezer temperature to keep your food safe is at or below
0°F (-18°C), but your freezer may need to be set higher or lower depending on its environment and other factors. The typical freezer factory setting on Whirlpool® refrigerators is a great starting point at the recommended 0°F (-18°C).
What's the Best Freezer Temperature? - Whirlpool
Not finding what you are looking for?
