20 Most Recent KitchenAid Kitchen Aid KEBS207SSS Double Wall Ovens Questions & Answers


HINGES WHERE PART NUMBER ENDS ON 6 - THEY TIGHTER

KitchenAid... | Answered on Apr 27, 2014


Request the Superba model kebc107kss03 manual directly from KitchenAid.

KitchenAid Ovens | Answered on Oct 29, 2020


Is it possible you've blown a breaker? Probably a double-breaker, 220V.

KitchenAid Ovens | Answered on Oct 27, 2020


the latch the hooks into the door is caught inside the slot where it locks into when in self clean,you have to move the latch,unplug it,look through the air vents or slots up above the door if you can get a screw driver in there try to move the latch or if you can get something down inside to move the latch,i used a plastic long wire tie to do this before,i slid the tie down around the metal hook part of the latch that locks into the door,and pulled it to the left and got the door to open,it got hung up in the hole and the door wouldn't open but what ever works you have to move the hook part of the latch to get the door open,you can try picking up on the door to see if you can get it open or you'll have to pull the oven out and take the top off to get at the latch,hope this helps

KitchenAid Ovens | Answered on Jul 04, 2020


In our case, the error code was displayed on a KitchenAid microwave/oven combo. It turned out to be a $4 fuse called the "Main Cavity Fuse". Good luck.

KitchenAid Ovens | Answered on Mar 04, 2020


Hi, my name is Audrey. I am a KitchenAid employee and would appreciate the opportunity to assist you with your oven. Please send me an email through our customer service address,

[email protected] and type 'Attention: Audrey' in the subject line. Please include your full name, phone number, and model and serial number, and I would be happy to try to help resolve the situation with your appliance.

KitchenAid Ovens | Answered on Aug 07, 2019


Hello Susan Bailey,
Typically "THEY" do...
It would be really great to know if we are talking about a USA domestic product...
or another NATIONALITY.
Other countries normally have FUSES in the
appliance cords.

Find your MODEL NUMBER and go to a PART/SPARES
supplier ( I like appliancepartspros.com )
-> appliancepartspros.com
If this is a "MICROWAVE" the FUSE will start popping because the MAGNETRON has deteriorated
and is CONSUMING it's own energy.

I can be a LOT MORE specific if you provide a
model number (pretty please).
Read minds... Cannot rally do...!!
https://en.wikipedia.org/wiki/Carnac_the_Magnificent

KitchenAid Ovens | Answered on Jun 25, 2019


Possible Solutions

Reset power to the product:

There may be a problem with the Oven Appliance Manger Control or the associated wiring.
  • Power unit down by turning off the circuit breaker(s) for one (1) minute.
  • Power unit up by turning on the circuit breaker(s).
  • Monitor the oven for one (1) minute to ensure the error code does not display again.
  • Verify oven operation.

Still need help? Call or schedule service.

KitchenAid Ovens | Answered on Feb 02, 2019


the is an external fan which draws all the moisture away,pull oven out and follows the two wires frm the and make sure both are connected and connected so it is alive when oven is on, if good the probaly a faulty fan

KitchenAid Ovens | Answered on Jul 15, 2018


KitchenAid KODE507ESS

(this MAY be your model??)... you did not specify?...

This link MAY have your DISPLAY PARTS:

KitchenAid Range Stove Oven Display Board

Anthony

KitchenAid Ovens | Answered on Jul 09, 2018


From the Site:

"F2-E6 - Cancel Key Line Open - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the 'cancel' function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly. All F3-E Codes - Oven Temperature Sensor (RTD) or Warming Drawer Defect - Replace oven temperature sensor (RTD)."

Kitchen Aid Appliance Fault Codes

Hope this helps!
Anthony

KitchenAid Ovens | Answered on Jul 09, 2018


there should be separate fuses for the top and bottom oven. check all of them if this is not the problem maybe your burner in the bottom oven is burnt.

KitchenAid Ovens | Answered on Jul 09, 2018


Hello,
You need to pull the oven out and see if you are getting 240 volts to the bake element (take the back panel off, press bake and start and put your meter lids on each prone of the bake element).
If you do get 240 volts to the bake element then the element is defective. If you don't get 240 volts then you may be looking at a faulty relay board.

Appliance Repair Brooklyn
http://appliancerepairbrooklynnyc.com/

KitchenAid Ovens | Answered on Jul 05, 2018


you have a bad computer board or clock assy. same thing the most common thing that cooks the board is heat and usually from self cleaning the oven,next time send the model number,if this is a slide in stove under the oven door is a drawer,open it and look at the frame,you'll see a tag with model and serial numbers,if that functions by itself you have a bad board.

KitchenAid Ovens | Answered on Feb 08, 2018

Not finding what you are looking for?
KitchenAid Kitchen Aid KEBS207SSS Double Wall Ovens Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Ovens Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

jdthefixer

Level 3 Expert

747 Answers

Are you a KitchenAid Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

KitchenAid Ovens

  • KitchenAid Ovens

Most Popular Question

e5 f2 mean control panel kitchen aid

  • Ovens
Loading...