20 Most Recent Jensen Awm970 Am Fm Cd Dvd Wall Mount Camper Trailer - Page 9 Questions & Answers

Usually it depends on what you want to be a member of. Payment to become a member of different internet groups differs from group to group if you can give more details maybe i can help you. Mail me on [email protected]
Hope this solution has been helpful? Endeavour to rate solution

The default security code is : 12345 or 1234

The red light is the error code. Count the number of times it blinks and that is the code you need to search for. The model number of the TV is also needed in order to diagnose it.

Good luck!

Peerless mounts should be able to take care of the mounting problem you have. Wherever you buy the mount you will need to know the VESA standard. It is:
VESA MIS-F 75mm mounting pattern

The cable company serving the dorm will have to provide you with a set top box with either composite outputs (the RCA yellow, red, and white) or component outputs (the Green/Y, Blue/Pb, and Red/Pr) in order to view tv channels.

Howdy. here are the national building codes for the Phillipines including National Plunbing codes:

http://www.chanrobles.com/republicactno6541.htm#REPUBLIC%20ACT%20NO.%206541

Hope you find this very useful.
Thanks,
Farmerbear at fixYa.com

Child lock activated pls read the user manual and deactivate

Hello Tom.
Out of my many years of TV repair experience.
Considering your situation, all that gas, mileage and time consuming issues I can give you best advise I am able to.
Jensen - is no-name TV, built somewhere at unknown location with quality that couldn't be lower. People who built your RV were greedy enough to install that "brand" instead of good and reliable one.You know why they replace it instead repairing it? Because there is no parts or technical support for this TV. It is obviously that cheap audio amp that they designed for this TV is not able to handle load and it's just keep blowing.
Save yourself from that nightmare - throw this useless junk away and invest in Sony or Samsung LCD of same size. Any repair attempt will cost you 25%-50% of price for the new one.
And stay away from all those "Radio Shack" brands that have limited production run and then disappear in darkness of today's market.
Regards.
Russ.

You have a bad capacitor. A bad capacitor will show low voltage and move to a point where it may not operate this TV. This capacitor may be located near the tuner, or it may be near the flyback and always suspect those high voltage low Mf capacitors. Such as 160 volts to 200 volt at 1 Mf ,2.2Mf, and 4.7Mf. These are most certainly contributors to your problem! At its worst point the tuner may need resoldered or replaced.Hope this helps you. Thanks for asking me!

Hi,

Configuring codes:
Turn on the component that you want to set up.
1.Hold the component key down until the green indicator light comes on. The green light should come on after approximately 3 seconds.
2.Release the component key.
3.If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.
4.Within thirty seconds, enter in a 4-digit code number. The component key lights will blink with an upward motion when a code has been successfully entered. In this case proceed to step #5. If the code has not been successfully entered, the componment lights will not blink. In this case return to strep #1 and start over.
5.Test code by pressing "Power" key. If the component turns off, you've got the right code. Follow the same instructions to set up your other components. If the component doesn't turn off, return to step 2 and use the next 4-digit code listed.

Auto Code Scan:
The Auto Code Scan feature allows you to set up your components without having to enter in code numbers. The Jensen will do the work for you!
1.Turn on the component that you want to set up.
2.Hold the component key down until the light comes on. The green light should come on after approximately 3 seconds.
3.Release the component key.
4.If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.
5.Press "0" - "9" The green light will blink as codes are sent.
6.As soon as the remote turns your component off, press the "action" key. The component key lights will blink with an upward motion when a code has been successfully entered. The component is now programmed. 7.If none of the codes turn your component off, return to step 2 and start over.

Thanx

I already encounter that kind of problem. it was came out to me on my troubleshooting. when repair a CD player it was 100% the motor or the ribbon of the player is damage due to heat.

My research has not turned up any information regarding a universal remote control, which looks like a cell phone or otherwise, that contains the strings "A0133" or "1001632".

Additionally, we would need to know the manufacturer of the devices you would like to control, in order to provide remote codes that will control those particular devices once we determined the make and model of the universal remote in question.

My best educated guess for you is to use the 'code search' function of your remote. Many remote manufacturers use the same code search protocol throughout their product lines, so if we can determine the manufacturer of your remote, we ought to be able to figure our how to program it.

Your query has been posted under "JENSEN" remote controls, so I am going to provide you with instructions for performing the code search function that works with many Jensen universal remotes:

1. Turn on the component
2. Press and hold the component key (TV, DVD, VCR-AUX, SAT-CBL)
3. The illuminated on-off key turns on and stays on
4. While holding the component key down, press and hold the ON-OFF key. The illuminated ON-OFF key turns off.
5. After holding down both keys for three seconds, the illuminated ON-OFF key turns back on.
6. Release both keys. The illuminated ON-OFF key remains on
7. Press and release the ON-OFF key repeatedly until your component turns off. Wait four seconds between each keypress. Each time you press the ON-OFF key, the illuminated ON-OFF key blinks, and the next code in the list is sent. This process continues until all of the codes in the code lists have been searched. If your component turns off, you have found the correct code. (If it cycles through and the illuminated ON-OFF key blinks four times and turns off, all codes have been search. The manual code search method is exited.)
8. Once you have found the correct code, you must save the new code by pressing and releasing the STOP key. The illuminated ON-OFF key turns off. You must press the STOP key to save the code or the correct code will not be saved.

I hope that helps.

Press Function and Mute at the same time,enter 0711 or 3308, you will have to re-program the TV. hope this helps..

I would try scanning for channels when tv is hooked up to your house main aerial or a portable aerial. If it does pick up channels, the tv is not at fault but instead your aerial ontop of trailer. If this is the case, check your aerial plug. If the plug is moulded on it may be broken inside, or if it is a fixable plug, check that the outer coax shielding is not touching the centre core inside the plug.

You need to hold down the display button on the remote for 5 seconds or more. This should solve your problem. Let me know if you need anymore help.

hardrocko

Thanks for using FixYa and for the generous rating.

You do not help people with problems all you want is money. The schematic diagram use to be posted inside the machine and now all you want is money. I asked for a solution and you only see money. Do not send anymore of your stupid 'solutions'. All I wanted was an interactions with other users who may also gain from me.

If you are talking about the code so you can watch movies while you are driving there is no need. The pink wire that comes out of the back of the stereo that say brake needs to be grounded to a regular ground.

When You installed it the pink wire that said to brake did you put it to an actual ground instead of the barking brake?