20 Most Recent Whirlpool 24 in. DU1100XTP Built-in Dishwasher Questions & Answers

Whirlpool Dishwasher DU1100XTPB7: The

The pump is most likely bad. If the dishwasher has some years on it, repairing might not be economical. Get some estimates, that will help with the decision to repair or replace.

Whirlpool 24 in.... | Answered on Feb 14, 2018

Water leaking from door after replacing detergent dispenser.

Whirlpool 24 in.... | Posted on Oct 14, 2017 | Be the first to answer

Dishwasher stopped mid-cycle

you have a bad thermal fuse in the control panel. it's the whit thing with 2 wires going to it

Whirlpool 24 in.... | Answered on Apr 24, 2017

A magnet the size of a quarter was in my dishwasher stuck to my silverware. This is 1 week old and I don't know where it goes.

Whirlpool 24 in.... | Posted on Dec 16, 2015 | Be the first to answer

Whirlpool dishwasher drainage problem..

This sounds like a bad timer. The timer is what tells the pump to drain at specified times. If it gets a bad contact, that timed cycle won't happen.

PS: Do you know for sure that the drain is occurring in mid-cycle? If not, you may just have an obstruction in the drain and/or anti-siphon valve (where the hose connects under the dishwasher.

Whirlpool 24 in.... | Answered on Mar 04, 2015

How do i fix a control lock blinking light on a dishwasher?

Whirlpool 24 in.... | Posted on Feb 21, 2015 | Be the first to answer

Mounting my dishwasher to granite counter tops.

Ask a local granite fabrication shop to get you some dishwasher mounting clips. They look like a perforated disc of metal with a small nut brazed to one side. They come with a short screw that attaches through your dishwasher mounting tabs. Place your dishwasher where you want it relative to the cabinets and pick a hole in the mounting tabs that won't leave the clip protruding and attach the clip to the chosen hole. Use masking tape on the top of your dishwasher door, wipe the bottom of the granite and the top of the clip with acetone, then use a gel-type two part epoxy from your local hardware store to attach the clip to the granite. Use enough to make the epoxy push through the perforations in the clip as this is how the epoxy grips the clip. Push the clip to the bottom of the granite and close the dishwasher door, using a wood shim or two between the top of the door and the mounting tab/clip to push the clip tight to the granite. Pull the shims out once the epoxy has cured (check the instructions on the epoxy).
Feel free to contact me with any questions. Brandon Wiese - [email protected] - http://.www.StoneRepairman.com

Whirlpool 24 in.... | Answered on Aug 04, 2014

Starts then stops 1min later

Whirlpool 24 in.... | Posted on Jul 14, 2014 | Be the first to answer

Water stays in bottom of my kitchen aid washer brand new... what is cancel drain for...

Whirlpool 24 in.... | Posted on Jun 21, 2014 | Be the first to answer

What yeaR made

Whirlpool 24 in.... | Posted on Jun 17, 2014 | Be the first to answer

Why does air gap overflow in the first two minutes of the "normal" cycle?

Air gap usually has a valve(sometimes rubber flap) that either is not working or is leaking. Needs to be rebuilt or replaced.

Whirlpool 24 in.... | Answered on May 28, 2014

Reset on partner 2 dishwasher

Whirlpool 24 in.... | Posted on May 19, 2014 | Be the first to answer

Where can I find the schematic that is normally kept under the kick plate on a Whirlpool DU1100XTPQ9 dishwasher.

Whirlpool 24 in.... | Posted on Apr 29, 2014 | Be the first to answer

Replace gasket on dishwasher

The dishwasher has a tub gasket and the door gasket at bottom of door.
Item 3 in this diagram is tub gasket
http://www.searspartsdirect.com/partsdirect/part-model/Whirlpool-Parts/Dishwasher-Parts/Model-DU1100XTPT9/1198/0130000/W0705061/00007?blt=06&prst=&shdMod=

and item 14 is the door gasket shown in this diagramhttp://www.searspartsdirect.com/partsdirect/part-model/Whirlpool-Parts/Dishwasher-Parts/Model-DU1100XTPT9/1198/0130000/W0705061/00003?blt=06&prst=&shdMod=

Whirlpool 24 in.... | Answered on Apr 20, 2014

Very bad smell coming from dishwasher

Possibly a water leak underneath or a dead mouse behind the unit.

Whirlpool 24 in.... | Answered on Apr 09, 2014

Lpr 600/1 start button lights sometimes ,stops after 20 seconds or wont light at all or machine stops half way through wash

Whirlpool 24 in.... | Posted on Apr 07, 2014 | Be the first to answer

LG LDS4821WW dishwasher leaks from front right bottom

your filter or drain are a bit block!
mix viniger and baking soda and water and let it sit over night...

Whirlpool 24 in.... | Answered on Mar 13, 2014

Reset whirlpool dishwasher

Whirlpool 24 in.... | Posted on Jan 06, 2014 | Be the first to answer

Can't remove lower spray arm

the nut screws off counter clock wise.

Whirlpool 24 in.... | Answered on Jan 04, 2014

Whirlpool dishwasher DU1014XTXQ1 stops mid cycle and drain

Whirlpool 24 in.... | Posted on Dec 30, 2013 | Be the first to answer

Not finding what you are looking for?

Popular Tags

286 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Whirlpool GU2400XTP Built-in Dishwasher

918 Questions

Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

493 Questions

Whirlpool 24 in. ADP5966 Free-standing Dishwasher

129 Questions

Whirlpool DU1055XTS Built-in Dishwasher

99 Questions

Whirlpool 24 in. GU3200XTP Built-in Dishwasher

102 Questions

Top Whirlpool Dishwashers Experts

Michael Thomas

Level 3 Expert

3056 Answers

Mike

Level 3 Expert

4372 Answers

Marvin

Level 3 Expert

85239 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Whirlpool 24 in. DU1100XTP Built-in Dishwasher? Or just drag it here!

View Most Popular

Whirlpool Dishwashers

Whirlpool Dishwashers

Most Popular Question

dishwasher problem

Dishwashers

Loading...